Pinty Tactical Airgun.

[cosmic]

Troy sear mod is incredible... My guess is under a pound !! I think I will go out and play...

[avator]

Troy sear mod is incredible... My guess is under a pound !! I think I will go out and play...

Yup... exactly what this gun was screaming for.

[rkrr20307@comcast.net]

THAMMER is the best. I sent him my sear and the middle part of sear to do his magic to. He reshaped the sear and the middle piece that pushes on the sear and it is almost butter smooth.

[TorqueMaster]

Here's a shorty version of that as well

Snagged 'em both, thank you.

[avator]

I think today will be final numbers day. I don't want to call it tuning because I'm far from a tuner.
Basically I just want to run some chrono strings with my 3 different cast pellets...
NOE 217 30 FN BBT
NOE 217 20 RF Hunter
NOE 217 24 RF Magnum
I may also test some factory pellets but my goal is to shoot my cast stuff. Farm to barrel if you will. 
My reg is set to 14 - 15 on the gauge and I won't be changing that.. all adjusting will be with the power wheel. That's the other reason I can't call it tuning.

[Back_Roads]

 I can name that tune in 3 shots

[avator]

Something I want to point out with the THammer modded trigger sear.
Hammer travel covers less distance with this sear. I first noticed this when cocking the gun after installing the new sear.
Used to be the breech collar would push all the way open and stay even if it wasn't in the forward lock position.
With the new sear it must be locked in to keep it full open.. not much, just what he removed from the sear. After loading the pellet and releasing the collar it will move forward under the pressure of the spring before the sear catches it. This equates to the less distance the hammer travel before opening the valve.
I'm not sure how that will affect power output yet but I do have those before strings for comparison.
I'm also going to explore the oring cushion on the valve... it's a play on the BStaley oring mod. I think THammer came up with this one. More on that later.

[avator]

I can name that tune in 3 shots

LOL... only you James.

[Back_Roads]

 Too windy to do much outside I did pick up trash that 50 mph wind tossed in my yard, but this is not the gate for that
 I wandered my meger selection of .22 ammo and selected some items of interest, and since I had the sizing press set up figured why not try some slugs and pellets that in no way would fit the P-tactical.
All sized to .217 some were very oversized,
 P-Tact at same settings as normal.

 Pile Drivers 600 fps 30gr

Eujin Point 673 fps ?gr

Rabbit Mag II 675 fps gr?

BBT   633 30gr

African Air Ordnance 602 34gr.
 
African Air Ordnance 495 50gr.

All hole in hole at 10m 

 I almost forgot photo evidence, groups or accuracy testing at longer rang up next.

[cosmic]

Did you try .218 ?

[Back_Roads]

Did you try .218 ?

.218 is too tight from the ones I tested, I actually sized down some.218 H&N 21gr slugs  as they were too large and shaved off lead when shot.

[cosmic]

Thanks Brother !!!

[Robert 5mm]

The H&N HP .218 21 gr slugs fit into my P-Force without being over tight and shoot good.
JTS 18.1 gr pellets fit at about the same tightness and also shoot good.

[Back_Roads]

The H&N HP .218 21 gr slugs fit into my P-Force without being over tight and shoot good.
JTS 18.1 gr pellets fit at about the same tightness and also shoot good.

The H&N .218 are marginal, they will work well without sizing,  my rifle will have some not seat fully with  thumb pressure.
I had H&N 21 gr in .217 prior and liked them better. also in Notos and other SPA guns.

[Hoosier Daddy]

I have neither seen nor heard of the H&N Rabbit Mag II before this.
 The tin lid in your pic says 27.01g but the photo on PA says 25.31g
Might have to try some of them, wonder if they will fit in the Kratos mags? 


*EDIT*
Never mind.
https://www.gatewaytoairguns.org/GTA/index.php?topic=188410.0

[Back_Roads]

I have neither seen nor heard of the H&N Rabbit Mag II before this.
 The tin lid in your pic says 27.01g but the photo on PA says 25.31g
Might have to try some of them, wonder if they will fit in the Kratos mags? 

I had to size them down to be any good.

[avator]

I have had a tin of these around here for 5 + years... I picked them up at a second hand joint or someplace for a couple bucks. I've never had a gun that shot them well... until now.. 
They are deadly accurate within my 45yd range in my P-Force straight from the tin... no sizing needed.
These little gems are almost too pretty to shoot. 

[avator]

I have a 16" disc from a farm implement that has been around since we came here. I have a heavy 2" ruff sawn wood backstop out in the woods at 80 yards that I'm going to hang it on. It's concave in shape so it should ring pretty good.
This wood has been soaked in creosote and it's rock hard. The backstop is about 6'x5'.
I just gotta wait until the swamp soaks in a bit before I head out to hang it. Me and cotton mouths don't get along too well.  

[Back_Roads]

 I have a tin of the copper coated ones too I have not tried them yet, it was supposed to be a test vs slugs way back when LOL.

[Hoosier Daddy]

Better a disc than a CI skillet Bill.