1
Turkish AirGun Gate / Hatsan Mod 100 spring and other improvements« Last post by Andyconan on Today at 11:20:57 AM »Hi guys, I am new to the forum, and to this world of AirGun in general. I recently got my hands on an old Hatsan Mod. 100, used a lot and with old and now not too performing parts. I was intending to make a few improvements, starting with a new spring, I had my eye on the HATSAN HI POWER 55 100 available in two versions, on the shopkeeper's site the MOD 100 is not specifically listed but a variety of other models such as the 100x and others that should have similar characteristics. From what little I have been able to find on my model since it seems really poorly reviewed and hard to find, the current spring should have these characteristics:
No. of total coils: 38 Outer diameter of the spring: mm 19.5 Wire diameter: mm 3 So the HATSAN HI POWER 55 100 should be compatible although I am undecided about the length. I hope you have some useful advice or better alternatives since as I said I am new. Another question, besides the spring, do you suggest changing anything else? Also I have not been able to find the exploded view of my model yet for easier and more accurate disassembly, do you know where to get it by any chance? Thank you for any answers 2
PCP/CO2/HPA Air Gun Gates "The Darkside" / Re: Diana Stormrider Gen 3?« Last post by roj on Today at 11:13:02 AM »Thanks, Y'all. If in fact the new version did sell here for $500, (on sale from almost six), they would certainly be pricing themselves out of a very competitive, modern day affordable pcp market. Now, that price may not take into consideration tariffs and taxes and other misc. charges. Still, if one can buy the gen2 for $219 and add both regulator and barrel band for less than half, who would buy one?
So, nevermind. 3
Crosman-Benjamin Air Gun Gate / Re: Contemplating getting 24 in barrel for 1322« Last post by TennX on Today at 11:11:43 AM »Current setup Did u ever get a barrel….I just remembered I got a brand new .22 from a 3622 ….its yours for postage $20 4
Engineering- Research & Development / Re: Trying to add pressure sensors to LDC testing.« Last post by WobblyHand on Today at 10:56:50 AM »All very interesting, Stan. Good stuff. Keep it up.
I can see moving the setup outdoors would be a little awkward at the moment. If you can, try to tie some stuff down to a board or plate. Even hot gluing things down might help. Or a weighted Panavise, or something like that to hold things still. 5
Welcome New Members / Re: Hello everyone!« Last post by Andyconan on Today at 10:56:09 AM »Thank you for the warm welcome, I am quite a beginner in this field so I hope you can answer some questions that I will post in the appropriate section.
6
Crosman-Benjamin Air Gun Gate / Re: Legacy 362 ?« Last post by TennX on Today at 10:30:54 AM »LOL... funny thing is that I find my self accepting this gun more and more. Started out with it being way overpriced in my opinion. When they dropped the price I complained about the plastic part and the badge. Now I'm finding myself kind of accepting the plastic.Ya know, lots of quality guns have at least some plastic parts. Lots of us buy plastic LDC/Silencers to put on them. I think the problem is that there are not many modern options out there for a good quality wood pumper these days. I have to admit, that's one nice looking hunk of wood. Then toss in the steel breech, metal trigger and the Williams peep and it becomes something to take a good look at. I could not tell u why i purchased..but @$239 …seemed like a no-brainer….your always fair and continually look at the bigger picture…good luck 8
PCP/CO2/HPA Air Gun Gates "The Darkside" / Re: Diana Stormrider Gen 3?« Last post by Bicycleman on Today at 10:30:05 AM »Ron, recently I bought some part from a guy in Canada and paid with PayPal. The conversion showed up in PayPal.
That is about all I know about the conversion. Google knows a little more than I do. = https://www.google.com/search?q=Convert+Rupe+to+US+Dollars&oq=Convert+Rupe+to+US+Dollars&aqs=chrome..69i57j69i60.12347j0j7&sourceid=chrome&ie=UTF-8 9
Vintage Air Gun Gate / Re: Central PA Airgun Show - tables sold out!« Last post by 45flint on Today at 10:28:04 AM »Shameless advertising
10
Airgun Detectives / Re: Kral Arms N-11, "Full Review" by Airgun Detectives« Last post by AudrenDbo on Today at 10:24:15 AM »Hi, I watched your video and him helped me to take some directions.
But I need a major help with the Kral N-11. I need the dimensions of the internals (diameter, length, mass): compression chamber; piston and his seal; gas piston (or spring). I'm about to buy one in .22 caliber, but need to know what parts I can find here in Brazil to tunning him after the warranty period, and need those measurements to inform local vendors. I contact Kral some times but they didn't answer me, and the local distributor didn't help either. So I'm looking for help in the shooting community, since online material about this rifle is very spare. |