Thank You!
See...Always the Brides Maid, Never the Bride....Se La Vie
I know some people don't care for the 4 piece Intermount system. It feels pretty solid. I will probablyuse Locktite or a rubberized coating like a chassis undercoating on the inside of the rings. Thought I'd share that, (maybe it's been before, I don't know?) I'm Happy with it!Cheers,Rich
Just to confirm Rich,You used a 1/2 drill bit and the breech is 9/16 and the radius matched?
Quote from: Hoosier Daddy on September 26, 2021, 08:13:09 AMJust to confirm Rich,You used a 1/2 drill bit and the breech is 9/16 and the radius matched?Thanks for the comments Guys.Yeah Scott I used 1/2 inch, I had the mount screwed tight together as I drilled it. I thought if I go with a9/16 bit there won't be enough left to tighten. That's only 1/32 per side. I cleaned the edgeswith a file to remove burrs. I'm going to apply a rubberized coating today, maybe (don't laugh!) Flex Seal or liquidelectrical tape to the inside of the ring, let it dry then put it on the barrel.
I am not understanding where the shims go. I want to try this.