Quote from: Firewalker on January 22, 2022, 12:10:50 PMQuote from: thumbs on January 21, 2022, 06:22:59 PMThrow the Safepac in the cartridge tube and use hpa in cold weather.Ok I’ll bite. What’s a safepac? Obviously new to this co2 thing. LolIt's an air tube that screws into the valve inside the Chaser where the CO2 cart nose sits and takes HPA through an 8mm QD. Fully functional as both CO2 and HPA, just put the valve front back on and insert a cart and shoot.https://www.ebay.com/itm/185191041834?mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5338722076&customid=&toolid=10050
Quote from: thumbs on January 21, 2022, 06:22:59 PMThrow the Safepac in the cartridge tube and use hpa in cold weather.Ok I’ll bite. What’s a safepac? Obviously new to this co2 thing. Lol
Throw the Safepac in the cartridge tube and use hpa in cold weather.
Blow back looses power and number of shots. Check out Pyramid Air's ads for both their P 08's. Both ads have videos that answer all your questions.Basically the non-blowback shoots around 400 fps and get 160 shots. $62. The blow back shoots around 300fps and gets 50 shots. $124.”Thanks. Yeah I saw that one. I know that action probably takes a lot of co2 to function but I find it hard to believe in one cylinder it takes 110 shots off the total shot count. I’m sure it was a mistake it still leaves me with the question. I also find it hard to believe tha non blowback gets 160 shots per cylinder. 160 is almost twice the shot count as other high shot count pistols I have seen. I saw one video where they said you needed to replace the cylinder after each mag. I find that hard to believe also. Unless verified through several videos I don’t trust any one reviewer. This is the great thing about this and other forums. The member’s police themselves. I would rather listen to a member and if the info is wrong the other members will be more than happy to correct them. YouTube has turned into a marketing tool. Don’t get me wrong a lot of good useful info but has to be verified by more than one review.
Quote from: Habanero69er on January 22, 2022, 12:32:58 PMQuote from: Firewalker on January 22, 2022, 12:10:50 PMQuote from: thumbs on January 21, 2022, 06:22:59 PMThrow the Safepac in the cartridge tube and use hpa in cold weather.Ok I’ll bite. What’s a safepac? Obviously new to this co2 thing. LolIt's an air tube that screws into the valve inside the Chaser where the CO2 cart nose sits and takes HPA through an 8mm QD. Fully functional as both CO2 and HPA, just put the valve front back on and insert a cart and shoot.https://www.ebay.com/itm/185191041834?mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5338722076&customid=&toolid=10050Do they make one of those for a 2240?
Quote from: Firewalker on January 22, 2022, 01:36:50 PMQuote from: Habanero69er on January 22, 2022, 12:32:58 PMQuote from: Firewalker on January 22, 2022, 12:10:50 PMQuote from: thumbs on January 21, 2022, 06:22:59 PMThrow the Safepac in the cartridge tube and use hpa in cold weather.Ok I’ll bite. What’s a safepac? Obviously new to this co2 thing. LolIt's an air tube that screws into the valve inside the Chaser where the CO2 cart nose sits and takes HPA through an 8mm QD. Fully functional as both CO2 and HPA, just put the valve front back on and insert a cart and shoot.https://www.ebay.com/itm/185191041834?mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5338722076&customid=&toolid=10050Do they make one of those for a 2240?Yes, he does. Look on Etsy if you cant find it on eBay or Amazon. The maker is HORRIBLE at installation instructions so look on YouTube if you have questions. On the Chaser, it was easy, disassemble the gun so you can remove the valve (where the cart piercer is) and unscrew the two parts from each other, screw the Safepac into the bottom of the remaining valve (poppet, spring, seat etc.) and reassemble. I charged the air tube up out of the gun and did the dunk test on it to make sure it didn't leak then reassembled it.