Quote from: Wayne52 on January 14, 2022, 02:03:49 PMI'll definitely be putting a steel breech on mine because I probably won't really notice the weight difference plus putting a scope on it will make a big difference no doubt. It's been so long since I've done much with the 22xx's I don't recall if the steel breech made a difference as far as fps goes Is there a benefit to upgrading the TP with the OEM valve? Just figured you could replace that while you have the breech off.
I'll definitely be putting a steel breech on mine because I probably won't really notice the weight difference plus putting a scope on it will make a big difference no doubt. It's been so long since I've done much with the 22xx's I don't recall if the steel breech made a difference as far as fps goes
Got my 362 today. Packaging was decent for the box protection but inside the actual retail box was a mess, they used two small pieces of styrofoam and they did not survive at all, pieces of styrofoam everywhere. But the gun looks just fine and it's shooting just fine. It's a fun plinker at 10 and 15 yards. Already ran around 75 pellets through it. Much easier to get to full power (8 pumps) versus doing 10 pumps on my 1322's. 8 pumps has a bit of a bark to it but I have been plinking at 2-3 pumps and it's pretty quiet. Seems to be pretty accurate for me but I am just know getting more into precise shooting versus destroying pop cans in the back yard. But speaking of pop cans the damage it did to a coke can at 8 pumps was very impressive from a 15 yard shot.
Quote from: Spacebus on January 14, 2022, 04:12:37 PMQuote from: Wayne52 on January 14, 2022, 02:03:49 PMI'll definitely be putting a steel breech on mine because I probably won't really notice the weight difference plus putting a scope on it will make a big difference no doubt. It's been so long since I've done much with the 22xx's I don't recall if the steel breech made a difference as far as fps goes Is there a benefit to upgrading the TP with the OEM valve? Just figured you could replace that while you have the breech off.Was wondering that myself, if I should use a piece of ice maker tubing.
Well, I might be shooting mine in stock form for awhile. I'm pretty sure my breech is a rear screw.