F'in A ... there ya go, high power nostalgia that may be relative old school but gets-it-done !!!Nice rig !!!!!
Maybe I misread the air gauge? I thought I had lost 500 psi over night, when I first filled the gun. However, when I went to find the leaks today, she's still holding steady at 2500 psi fill... So I filled her back up to 3k (or close to it, I'm running low on air ), and sprayed some windex all over the air block, gauges, burst disc/fill nipple and bottle... Nothing. Not even on the degasser screw. So I'll check again tomorrow to see if I just mis-read the gauge the first time around. *crosses fingers*I had a thought this morning, and compared a .25 Mrod mag and the Flex's .30 mag. Externally they're the same shape. Of course, the difference is the thickness. CARM makes .30 conversion mags for Mrods. I've sent him a message via the Book of Faces, hopefully he says yes. Basically, I asked him if he could tweek his .30 conversion mag design. If he can, he can add the option to his store, specifically for the Flex (and WARP I would assume). He could probably also re-design the wheel for other calibers as well. NOTE: CARM got back to me, he's able/willing to adjust his design. So I'm going to get my original mag to fit the way I want (snug, but not TIGHT), and send the measurements to CARM. I'm going to make a more in-depth comparison of the Mrod and Flex breech openings and mags to make sure all my bases are covered. I'll let y'all know what I come up with.
IF YOU do this ... Order a CARM ( WARP /FLEX ) .30 cal mag for me too !! Suggest making it size against the OEM barrel end shoulder specs and NOT M-rod. Width to fit OEM mag gap. IMO** When I use a .25 or .22 barrels on these rifles, I'm using M-rod mags with a correct thickness backing spacer glued to the back area of slot to close the gap and it works fine !!
Tom, looks beautiful! I hope you get the magazines from Darko…maybe ask for single shot loaders too?
Quote from: ranchibi on October 10, 2021, 08:15:55 PMTom, looks beautiful! I hope you get the magazines from Darko…maybe ask for single shot loaders too?I was thinking about a single shot loader- but he doesn't even offer those in .25 let alone .30. If I get a wild hair, I'll see what's what.
I’m sure Darko’s mags will work perfectly! Getting closer!