We’re do you get that longer adaptor?
Below is what I have to refill 88/90g canisters The long end adapter goes into the gun, the middle section stays on the canister and has a standard thread for Co2 re-filling at the other, this end is screwed into the long adapter which has the correct threads for that mid section section. All these sections have one way valving.When I want to refill I screw off the long adapter and refill with the mid section on and when filled I re-Install.For you guys that have done this, does this seem correct ?wll
My set up during my bulk filling days, the ones by the qb79 are on/off fittings and the brass on unpainted 88 has valve in it. Fittings are long discontinued from market.
Below is what I have to refill 88/90g canisters The long end adapter goes into the gun, the middle section stays on the canister and has a standard thread for Co2 re-filling at the other, this end is screwed into the long adapter which has the correct threads for that mid section section. All these sections have one way valving.When I want to refill I screw off the long adapter and refill with the mid section on and when filled I re-Install.For you guys that have done this, does this seem correct ?wllThe easiest way to refill the 88g's that I've seen is to use the refill adapter that B&A used to sell. It screwed onto the 88g and had a check valve in it. Since Ron @ B & A passed, all of his parts were bought by Baker.Ron was a very innovative guy in addition to the 88g refill adapter he also developed the long adapter that you have for using a 9oz tank on the Ham 850's. For my 850 I use the 2 x 12g adapter and just bulk refill it.