H&N Barracuda Review.
Select Gate
READ GTA FORUM RULES BEFORE POSTING
GTA Forum Help Desk
GTA Announcement Gate
Dealer Area
GRIP
AirgunWeb Airgun Videos
Airgun Repository of Knowledge
Vendors and Vendor Videos
AirGun Expo 2021
Airgun Expo 2022
Contests and Giveaways!!!
Welcome New Members
In Memoriam
GTA Contributing Members
Shot Show Videos
Hajimoto Productions
Airgun Detectives
Air Gun Gate
BB Guns and Such
"Bob and Lloyds Workshop"
American/U.S. Air Gun Gates
European/Asian Air Gun Gates
PCP/CO2/HPA Air Gun Gates "The Darkside"
Air Archery
Vintage Air Gun Gate
Air Guns And Related Accessories Review Gates
Hunting Gate
Machine Shop Talk & AG Parts Machining
3D printing and files
Buyer's, Seller's & Trader's Comments
Bargain Gate
Back Room
Target Shooting Discussion Gate
Target Match Rules
Shooting Match Gates
Field Target Gates
The Long Range Club
100 Yard Match
Discussions By States
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
About
Help
Old GTA
Gallery
Search
Stats
Login
Register
Advertise Here
GTA
»
All Springer/NP/PCP Air Gun Discussion General
»
Projectiles
»
Pellet Review Gate
(Moderators:
uncle paulie
,
Tater
) »
H&N Barracuda Review.
« previous
next »
Print
Pages: [
1
]
Go Down
Share This!
Author
Topic: H&N Barracuda Review. (Read 1337 times))
Airgun.Sniper
GTA Senior Contributor
Posts: 3392
H&N Barracuda Review.
«
on:
August 05, 2014, 05:48:37 PM »
A couple of weeks ago I promised I would do a review on this pellet. Here it is.
Well Here are the test procedures I used personally.
Test # 1: I used 1 gallon milk jugs and filled them with water till full. I used there and placed them directly behind each other.
Test # 2: This test was used using Old wet phone books suggest by Joel aka Mr.Sis. I wet them up...they were about 2" thick. I then set them in front of my duct seal target.
Test # 3: Is for the hunter...I knew these were a hunting pellet and I wanted to see how they did on a straight on head shot with a squirrel. I happen to have one set up perfectly and put in right between his eyes, on his forehead.
All the test were done between 23-25 yards.
The normal size of this pellet measure 4.51 or 4.52 it varies using a caliper.
Here are some pictures....
This pellet here is the normal size of the pellet right out of tin.
Here is the biggest pellet expansion in the first test. I shot 4 times at the specific target and wrote down the biggest one for my result.
The pellet here is used for test # 2. And is the biggest out of 4. It measures 5.32mm
here is the hunting pellet that took out the squirrel. It measured 6.47mm and has a 1.97mm increase.
I shot four pellets into all my test except for #3. If you want an ES I will be gladly to give it to you.
Thanks for reading
Jay
Logged
Benjamin Maruader Gen II .22 cal LW Barrel
Vortex Viper PST Gen II 5-25x50 FFP MOA
Print
Pages: [
1
]
Go Up
« previous
next »
GTA
»
All Springer/NP/PCP Air Gun Discussion General
»
Projectiles
»
Pellet Review Gate
(Moderators:
uncle paulie
,
Tater
) »
H&N Barracuda Review.