GTA
All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => China/Asian AirGun Gate => Topic started by: drumdrumman on May 09, 2018, 11:11:10 PM
-
Hi there..
I'm based in the UK.. Where can I get a new Piston seal for my RS2 Sportseries. Not Taken it apart yet . Also if I take all the blue of in the Internals with a good tune do I need to re blue it..
Sorry for all the questions I'm a Newbie and loving it...
Regards
Darren
-
Try contacting Nick at Tinbum. He's in the UK.
http://www.airrifletuning.com/ (http://www.airrifletuning.com/)
-
I'll try him cheers Roadworthy.... ;) ;)
-
Thanks Roadworthy.. I will try him.. I may want a new spring as well.. Many thanks for your help.... ;D
-
Custom Air Seals from Down Under (EBay). That's where I got mine.
-
Is there any Particular one to get from Custom Air Seals Artie... ?
-
You want a 26mm seal. CAS has a green one, no.26 ($13.44 US).
-
Nice one cheers Artie.. I'll save that pic so I know which one to get... ;) :D
-
Hi Artie.. Got it all apart now Going to order a New Piston Seal..Quick Question..How did you get the Screw out ?
-
First verify the seal you need is 26mm (trust but verify). Also, be certain the one you order is 26mm. I did both correctly and CAS still sent me the wrong size. No problem, they sent me another (the right one) at no cost except for time.
Removing the screw:
Make sure your screwdriver tip is exactly the right size. That may require grinding or buying one. While your doing that pour some acetone on the upright piston head. Let is soak.
With the correct screwdriver, give it a firm but half hearted try. If that doesn't loosen the screw gotta use heat. Coupla methods come to mind (done it before). A soldering gun tip held on the screw head several minutes, try that or... heat gun waved around piston head (say bye-bye old seal).
One of these methods should do it. Afterward clean screw and threaded hole with q-tips/acetone Apply blue loktite to screw threads before installing new seal.
-
You Star Artie... :D All makes total sense to me..I will go with the 26mm Seal from them and go from there..I have Acetone and a Solder Iron..Much Respect for the Info...Once the seals are changed I can get it all back together... :D ;D
-
Got it out Artie.. Worked a treat.. Just waiting on the New Seal now form Aus.. Then put back together.. Looking forward to shooting it.. ;)