GTA

All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Topic started by: AmBraCol on April 04, 2013, 03:32:34 PM

Title: Instructional Videos for Newbies
Post by: AmBraCol on April 04, 2013, 03:32:34 PM
For those interested in learning some basics regarding machining, etc, here's a links to some  machine shop basics.

http://khake.com/page88.html (http://khake.com/page88.html)
Title: Re: Instructional Videos for Newbies
Post by: CharlieDaTuna on April 04, 2013, 09:20:21 PM
Thank you AmBraCol. A great contribution and much can be learned here.

I have looked at some of these instructional videos and there is a tremendous amount of knowledge that can be learned here and how the different machines work and how they relate to each other. This is especially true for the new guy that has an interest in getting into some machine work and thinking about what equipment he might want to purchase.

CDT
Title: Re: Instructional Videos for Newbies
Post by: customcutter on June 03, 2023, 07:47:55 PM
Thanks for the link.  I've seen it before, but saved it to My Favorites for future use.