GTA

Target Shooting Matches, Discussion & Events => The Long Range Club => Topic started by: huntr on February 21, 2023, 09:32:02 PM

Title: New submission 100M
Post by: huntr on February 21, 2023, 09:32:02 PM
FX Wildcat Mk III, .22 cal. w/ HN HP 25gr. slugs.
This range is 100M and I used my Nikon rangefinder to measure it @ 110 yds.from the front of th bench.

(https://i.imgur.com/B9VW6we.jpg)
(https://i.imgur.com/0N3h1SO.jpg)
(https://i.imgur.com/mrTNWHi.jpg)
(https://i.imgur.com/mI9Uvhk.jpg)

Question... would the target below be allowable. I actually shot significantly better groups on my 25yd. and 100M POI check targets prior to shooting for record. I believe because I was better able to see the aiming point. My color printer is not working so printing the colored target was not an option.

(https://i.imgur.com/VnsUbB0.jpg)
Title: Re: New submission 100M
Post by: rsterne on February 22, 2023, 12:35:42 AM
Strictly speaking, no, because the sticker could conceivably be covering up a shot or shots.... I would recommend that you just take a felt pen of highlighter and colour in the bull, that is allowed, provided you can still see the black rings.... That is what a lot of guys use the all white target for, it is cheaper to print, and then they colour in the bull or a ring....

Bob
Title: Re: New submission 100M
Post by: rsterne on February 22, 2023, 12:47:52 AM
Congratulations, I have added you as a Marksman.... Welcome to NUAH....

Bob
Title: Re: New submission 100M
Post by: huntr on February 22, 2023, 02:29:42 AM
Thanks, understood.
Title: Re: New submission 100M
Post by: Tater on February 22, 2023, 05:21:31 AM
Congrats Don.
Title: Re: New submission 100M
Post by: mr007s on February 22, 2023, 07:40:01 AM
Strictly speaking, no, because the sticker could conceivably be covering up a shot or shots.... I would recommend that you just take a felt pen of highlighter and colour in the bull, that is allowed, provided you can still see the black rings.... That is what a lot of guys use the all white target for, it is cheaper to print, and then they colour in the bull or a ring....

Bob
If the sticker is only covering the X ring then what would it matter, they would still score ten?
Title: Re: New submission 100M
Post by: huntr on February 22, 2023, 10:26:47 AM
Strictly speaking, no, because the sticker could conceivably be covering up a shot or shots.... I would recommend that you just take a felt pen of highlighter and colour in the bull, that is allowed, provided you can still see the black rings.... That is what a lot of guys use the all white target for, it is cheaper to print, and then they colour in the bull or a ring....

Bob
If the sticker is only covering the X ring then what would it matter, they would still score ten?

I had the same thought, but rules are rules and when you start making exceptions, things get messy and harder to administrate.

I'll try coloring the center next time. My groups on targets with good aiming points were significantly smaller. Which is why I decided to try and qualify. Using ammo right out of the tin. One thing I did learn.... which you all already knew... cant matters. When I was checking my POI, if I forgot to check my level, it made a real difference.  ;)
Title: Re: New submission 100M
Post by: KevinJBrown on February 27, 2023, 03:40:42 PM
In the FWIW category. I’ve found if something colored on the target matches something on my scope reticle just undersized (so I can surround it with the reticle) my accuracy goes up.