GTA
All Springer/NP/PCP Air Gun Discussion General => Bargain Gate => Topic started by: Ordinary Average Guy on May 14, 2021, 02:27:06 PM
-
promotion code: MXWF7M8W
https://www.amazon.com/gp/product/B07T68Q5F5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 (https://www.amazon.com/gp/product/B07T68Q5F5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1)
-
Thank you.
-
you're welcome, I just happen to be in the process of redoing my backyard "range" and it popped up in my newsfeed from a group I belong to, size wise it will be perfect for 20 yards, build an enclosure with a 2" thick white oak backstop, mound dirt and mulch over it, no one will know it's even there unless they're looking out my shop door.
-
Holy Cow! $4.60 after the code! That is some deal thanks!
-
Troy, thank you...ordered 1!
-
Ordered 2. Thank you
-
Ordered 3. Thank you. Under $15 to my door.
-
Can’t fight $4.60. Thanks.
-
Promo code must be a mistake... bagged me one.. Thx
-
Thank you kindly, Sir Troy.
-
$5.99 shipping without Prime.
-
Thank you, ordered a few!
-
$5.99 shipping without Prime.
You should be able to change it to free shipping. My total was 22 and change and there was a free shipping option
-
Thanks for the link and pass code. I don't even need one and ordered one. 😳
-
Great deal!
-
$5.99 shipping without Prime.
You should be able to change it to free shipping. My total was 22 and change and there was a free shipping option
I put one in the cart and applied the code. I only had 2 shipping options. Free with Prime or $5.99 without. Still a good deal if you buy 2 or more.
-
dang thats nice, had to order some more stuff to get free shipping, def gonna need to construct some type of extension stand though dont like shooting at the ground!
-
dang thats nice, had to order some more stuff to get free shipping, def gonna need to construct some type of extension stand though dont like shooting at the ground!
I have some of these. I used some thin wall steel tubing as leg extensions for mine.
-
Excellent find. Greatly appreciated!
-
Ordered 3. Thank you. Under $15 to my door.
Decided to order 2 more for a project.
-
Excellent! Just ordered three of them. Thanks!
-
Got 2 for less that $10. Thanks!
-
I ordered 2, should be here Monday. Crazy good deal. ;)
-
That is a good deal!
Got one.
-W
-
Update...
I put 4 in the cart and it applied the discount. Then it gave me the free shipping option that I didn't get when ordering just one.
I pressed 'play' and now have 4 of them on the way for less than $20.
Great deal.... thanks.
-
Awesome, thanks! I ordered 3. I wanted to order more but I don't really need any more and in case the stock is limited I want to leave some for other members.
-
Am I late to the party??? even with Prime I'm getting a total of almost $100 for 4 with shipping ???
-
Am I late to the party??? even with Prime I'm getting a total of almost $100 for 4 with shipping ???
Maybe there is a limit on how many you can get. Try ordering 1.
-W
-
Am I late to the party??? even with Prime I'm getting a total of almost $100 for 4 with shipping ???
There is a promotional code in the original post. You have to enter that in the payment screen.
I just tried it still works. I almost ordered 4 more :)
-
Thank you for posting the code and the link, I ordered one but I'll be ordering a couple more, too good a deal to pass up on.
Stay healthy
Ted
-
I love a good deal. Thanks.
-
Thanks for the great info, ordered 3 and will place them at different distances, one day delivery w/prime.
-
It's never too soon to start Christmas shopping. All of my air gun friends will be getting one of these. My fishing friends get airbrushed lures
-
[chuckling] just ordered 2 more
-
Just got an "arriving early" notification from Amazon. Should have mine tomorrow. Wooohooo!
-
Found a convenient way to use mine:
1) plastic tub from either Home Depot or Lowes (I forget and label is long gone)
2) folded up inside (it just kinda drops down automatic-like when tilted back)
3) deployed and ready for shootin'!
I recommend a backer board inside, as well as a way to lock down the front legs in case of movement (although have not shot at it yet).
-
Holy smokes! I jumped on this deal, too.
Many thanks!!!!
Archie
-
Fantastic, a great price and a super target piece. THANK YOU for the information!!
-
OK got it to work, I was trying to use the buy it now button, I had to put it in my shopping cart to work the code MXWF7M8W
-
I got 5 of them, they will make great Christmas presents! ;D
-
I’m shocked. I just ordered and applied code. Still works. $4.60 and free shipping. (Prime member) wow. Gotta be a mistake!
-
amazon sez its arriving today even though i dont have prime.
-
I got mine today. I'm very pleased with the quality. They look like they'll hold up just fine. Definitely a lot heavier duty than my Crosman spinners.
-
Ordered 4 now. Pretty great deal since the crosman spinners went up to 7$ now.
-
Thanks for the heads up. Great deal. Ordered 4 ( use 2 and give 2 as presents) . Started to order 10 just to have, but like others I didn't want to take all of them. Thanks again.
-
I went back and ordered an extra one yesterday, as of 12PMCST they have it marked out of stock until late May so I'm glad I did.
-
Just in case anyone is wondering, the metal plate used to make the paddles is 25/128" thick, or a bit over 3/16". Looks like they will stand up to rather powerful airguns, maybe even rimfire...?
-
Comparing the thickness of a Crosman spinner paddle to this one.
-
20 yards with my 25 Flashpup. No dents.
-
20 yards with my 25 Flashpup. No dents.
SUPER-de-Dupper! ;D ;)
-
Just got my two a couple minutes ago. Went to send the deal to some family and saw that they're sold out now.
Nathan
-
Been smacking it all afternoon with 18gr and 21gr @25 yards, such a simple thing I didn't know I needed
-
I might have bought them out got shipping notification this AM on the 4 I ordered Sat PM.
Good to see they are fairly robust. 8)
-
I ordered 2 for me and 2 for the friend that bought my Maximus. Yes, they are rated for 22LR. Much heavier than the ones I have rated for airguns.
-
Got mine today. AWSOME. Heavy duty and should last a long time. Big enough for 50 yards plus. My current set up is too small for more than 30 yards free hand.
-
I received notification today that mine arrived at the post office. They are holding our mail untill Wednesday.
-
Thank you Skyowa for the heads up on this deal.
My four showed up today. If I had paid full price I would have been happy.
Didn't have a lot of time but I broke out one of my Umarex Fusions (177 CO2) and at at 50' or so with 8.2s the smack was there but not enough energy to flip those heavy spinners up and over.
Grabbed my 22 XS60C shooting 16s and that threw them up there.
My PP750 in 22 shooting 16s did the same and the size of the targets are great for me shooting offhand with the 750.
I sure do miss having 20/15 vision. :(
PS the stickers are a joke. the adhesive is worthless
-
I just use dots instead of the stickers
https://youtu.be/SGT5SIEG3q4
-
Once the stickers are gone, I switch to spray paint.
-
Thank you Skyowa for the heads up on this deal.
My four showed up today. If I had paid full price I would have been happy.
Didn't have a lot of time but I broke out one of my Umarex Fusions (177 CO2) and at at 50' or so with 8.2s the smack was there but not enough energy to flip those heavy spinners up and over.
Grabbed my 22 XS60C shooting 16s and that threw them up there.
My PP750 in 22 shooting 16s did the same and the size of the targets are great for me shooting offhand with the 750.
I sure do miss having 20/15 vision. :(
PS the stickers are a joke. the adhesive is worthless
Everyone should wear safety glasses when shooting these targets. There will be ricochets from shooting guns without enough power to flip the targets. Stay safe
-
My 4 sets are scheduled to arrive on Thursday along with an LED light bar I ordered for Betty Lou's ATV.
A while back I gave a classic Daisy to the grandson of the owner of one of the ATV/RV parks we frequent. My original plan was to gift him one of these targets as well. However, on second thought, that is not such a good idea considering he is shooting BBs out of the gun. He only shoots under his parent's supervision but I still think he is too young to understand the dangers of ricochet with BBs.
I am basing my decision on my own experience when I was that young. I would sneak off at any opportunity with my BB gun and I would be left to my own devises in safety... you could say that many of my adventures were below the line separating right and wrong... :o
-
Just got a UPS update that my package will arrive tomorrow.. 1 day early.
-
I got mine today. I'm very pleased with the quality. They look like they'll hold up just fine. Definitely a lot heavier duty than my Crosman spinners.
Same here.
Looking forward to the sound of clanking lead on steel!
-
I got mine yesterday. I can’t wait to set them up Saturday. I’ll likely dip the paddles in yellow paint tonight and save the stickers for paper targets. I’ll be setting them up to shoot at 20 & 30 meters maybe even 40 meters for my .22 pellet rifles.
-
I've had one of these for some time now along with a 6 paddle set that I made. I always used bright orange safety paint to repaint the paddles when needed. I'll be painting these the same way. I tried yellow but orange seemed to be more visible at night with lights on them.
-
My 4 sets are scheduled to arrive on Thursday along with an LED light bar I ordered for Betty Lou's ATV.
A while back I gave a classic Daisy to the grandson of the owner of one of the ATV/RV parks we frequent. My original plan was to gift him one of these targets as well. However, on second thought, that is not such a good idea considering he is shooting BBs out of the gun. He only shoots under his parent's supervision but I still think he is too young to understand the dangers of ricochet with BBs.
I am basing my decision on my own experience when I was that young. I would sneak off at any opportunity with my BB gun and I would be left to my own devises in safety... you could say that many of my adventures were below the line separating right and wrong... :o
BBs will DEFINITELY come back at you, ask me how I know. One put a chip in my polycarbonate lens on my glassed. Target was about 20 yards away if I remember correctly, I figured I was plenty far enough away. "Bing"!!!
-
I got mine yesterday. I can’t wait to set them up Saturday. I’ll likely dip the paddles in yellow paint tonight and save the stickers for paper targets. I’ll be setting them up to shoot at 20 & 30 meters maybe even 40 meters for my .22 pellet rifles.
I paint them yellow as well John. As like you, I'll save the stickers for paper targets.
-
I've had one of these for some time now along with a 6 paddle set that I made. I always used bright orange safety paint to repaint the paddles when needed. I'll be painting these the same way. I tried yellow but orange seemed to be more visible at night with lights on them.
You could paint them with florescent paint and place a small uv bulb near by.
-
I always used bright orange safety paint to repaint the paddles when needed. I'll be painting these the same way. I tried yellow but orange seemed to be more visible at night with lights on them.
Bright Orange Safety Paint —- Yes.
-
I'm using the white zinc oxide and baby oil mix recommended for the bell target game we were all making this past winter.
The dang stuff works amazingly well on all of my steel targets that I mixed up another bottle of it this past weekend.
-
I'm using the white zinc oxide and baby oil mix recommended for the bell target game we were all making this past winter.
The dang stuff works amazingly well on all of my steel targets that I mixed up another bottle of it this past weekend.
Just curious what the advantage of making this emulsion would be over just spray painting it white?
-
I was interrupted reading this thread by the arrival of a Amazon prime package, yup my targets made it here. 8)
-
I've had one of these for some time now along with a 6 paddle set that I made. I always used bright orange safety paint to repaint the paddles when needed. I'll be painting these the same way. I tried yellow but orange seemed to be more visible at night with lights on them.
You could paint them with florescent paint and place a small uv bulb near by.
Glow in the dark targets would be pretty cool! ;D
-
I received my targets yesterday! They sure are fun and I like the painting ideas, safety orange sounds good to me!
-
I've had one of these for some time now along with a 6 paddle set that I made. I always used bright orange safety paint to repaint the paddles when needed. I'll be painting these the same way. I tried yellow but orange seemed to be more visible at night with lights on them.
I've been using white paint on mine, but I noticed these with the orange stickers are much more visible. Time to go buy some orange safety paint.
-
I'm using the white zinc oxide and baby oil mix recommended for the bell target game we were all making this past winter.
The dang stuff works amazingly well on all of my steel targets that I mixed up another bottle of it this past weekend.
Just curious what the advantage of making this emulsion would be over just spray painting it white?
Many reasons: no buildup, instant usability, better visibility of strikes, lower cost, easy application, high contrast and simplicity.
I painted all my steel for decades shooting PB and it worked fine for high velocity rounds but at 50y, pellets just dont have the energy to penetrate the many layers of paint so all my small AG targets now have the Bell Target 'paint'.
I think my favorite part is that I can just wipe all the emulsion off, have clean steel (no rust at all) and reapply if I get mower debris or bugs on them and start with a new surface.
That picture above was after a dozen sessions of shooting and I just wiped an acid brush across the surface to spread out the emulsion already on the surface and just add a drop to the brush when needed to cover the strikes.
-
Mine came yesterday. It's a little too solid for my QB78 at 20 yards; the lower targets just sway rather than flip around. That's no big deal for me, though. Well worth the $5.
-
Thank you, I just ordered 3. One for me and two for my sons.
Could not pass this deal up.
-
Our 4 sets arrived yesterday.. one day early from original estimated delivery date.
And you guys are right, these are thicker than the original Walmart one.
Betty Lou and I were outside until 9pm last night. We are reorganizing the shooting range. We've been spending most of our time lately RVing and playing in the mud with the ATVs so our shooting has taken a backseat. We expect a fellow GTA member to visit over the 1st weekend in June so we are getting things back in shape for a great time shooting and hanging out.
This deal came along in perfect timing.... thanks again.
-
every pellet I've thrown at these things literally disappear into a cloud of dust and debris with just a little flat disc of lead left, and the only damage to the targets is chipped paint.
-
Good to hear because I am going to throw some serious lead at them. We're talking 40+fpe at 40 yards <> with .25 cal.
-
I have 4 stashed under the workbench, one set and ready to rock! 😁
-
I have 3 of these and just ordered 2 more.
At less than $5 each these targets are a fantastic deal.
I opened one target and the spinners are really solid, frame is solid too.
I can shoot at these 5/16 - 3/8 steel balls (from a slingshot) without fear of breaking them.
-
Ordered two more. Code MXWF7M8W still works. In stock June 1.
-
promotion code: MXWF7M8W
https://www.amazon.com/gp/product/B07T68Q5F5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 (https://www.amazon.com/gp/product/B07T68Q5F5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1)
Thanks for this super sweet deal! $4.60!!!
Had fun with it today. ~38 yards with a .22 Fortitude & SAM. Couldn’t get them to flip over though!
-
Thank you. I ordered one while traveling and it was delivered by the time I returned. The lollipops are thick and appear heavy enough for 22LR. The frame’s wire is definitely only AG gauge. And it comes with a sheet of target stickers.
Ive been shooting it at 28 yards and the .177 has a hard time getting the lower targets to swing up and stay. The fortitude .22 has no problem.
Definitely worth the $4 delivered.
-
These will get lots of use. We have a little shooting get together here in a couple weeks.
-
I have not un boxed mine as of yet, but do have a couple sets rated for rimfire, and I can get them to flip if hit lower than center, it does take the perfect hit to flip.
Guess I better catch up on my airgun related activities. :-[
-
I’m going to give mine a try today with the Parrus .22 at 20 & 30 meters, first. I’ll try some other rifles after that & take note of which ones can flip them or not at what distances.
-
These certainly take some power to flip. My .22 shoots over 1000 FPS at 18 grains. I don’t know if I’m hitting it to hard or not hard enough at 75 feet.
It’s heavy duty unlike the targets you see at Walmart
-
I finally got around to opening one of mine, they do seem very close to .22 rimfire quality, right before opening 'I found my cans of florescent spray paint so it got a paint job right away, when it cools down I will put it to the flip test.
-
I've got mine mounted straight up and not leaning back. My .177 Stormrider is shooting 10.5 CPUMs at 800 fps and easily flips the paddles at 20 yards.
-
I shot mine at 30 meters with my Walther Parrus .22 (23.75 FPE) and my Walther LGU .22 (15.66 FPE) and they flipped them flawlessly. I also shot it at 20 meters with my FDAR XS60C .177 (10.5 FPE), with perfect center paddle shots it still flipped them & reset every time. I went back & ordered 5 sets. 8)
-
I couldn't stand it either. I went back and ordered 2 more.
-
promotion code: MXWF7M8W
https://www.amazon.com/gp/product/B07T68Q5F5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 (https://www.amazon.com/gp/product/B07T68Q5F5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1)
Thanks for this super sweet deal! $4.60!!!
Had fun with it today. ~38 yards with a .22 Fortitude & SAM. Couldn’t get them to flip over though!
They flipped fine today though! ::) IDK.
Very fun. Very very fun.
Now why are folks buying so many? What am I missing? Do I need to get a second one?
-
I'm going to redo my range with them. I like them a lot better than the Crosman spinners I'm using now. The Crosman paddles are bigger but thinner, so I'm going to back them out further and use these new ones in closer because they will hold up better to 25 caliber hits.
-
Not So Bright David Moment, ahead:
I "painted" my paddles and set the target on the freshly mowed ground. Sauntered back to my shooting bench, sat down, pulled the lever back on the .25 DARling, pushed the slug home, all 46 grains of her, sighted the scope at 50 yards, sqweeeeezed the trigger... SPLAT! The paddle went up and straight down. :(
4 more slugs, 4 more hits, no paddles stayed up!
Sigh!
Yes, it's true, I didn't think about the reset bar, it was blocking the paddles from mounting the bar so once I moved the support bars to the front, low-and-behold, I got all four paddles on the bar and hit the release....
Rapture
-
promotion code: MXWF7M8W
https://www.amazon.com/gp/product/B07T68Q5F5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 (https://www.amazon.com/gp/product/B07T68Q5F5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1)
Thanks for this super sweet deal! $4.60!!!
Had fun with it today. ~38 yards with a .22 Fortitude & SAM. Couldn’t get them to flip over though!
They flipped fine today though! ::) IDK.
Very fun. Very very fun.
Now why are folks buying so many? What am I missing? Do I need to get a second one?
Um..... Yes?
I just ordered 3 more, drove them out of stock.... Sorry guys. ::)
All I can say is that when I give these away for Christmas, I'm gonna look REAL good! ;)
-
Not So Bright David Moment, ahead:
Yes, it's true, I didn't think about the reset bar, it was blocking the paddles from mounting the bar so once I moved the support bars to the front, low-and-behold, I got all four paddles on the bar and hit the release....
Rapture
;D That sounds like something I would do!
-
Now why are folks buying so many? What am I missing? Do I need to get a second one?
I ordered more because the price is ridiculous and I can set them at more yardages at the same time. ;)
-
Very much enjoying my target. Seems to hold up to .22 cal out of my Air King and D460 without issue.
I noticed this Chinese company Hiram sells a few other types of targets like a dueling tree, etc. I was hoping the coupon code might apply to some of them, no luck!
-
Now why are folks buying so many? What am I missing? Do I need to get a second one?
I ordered more because the price is ridiculous and I can set them at more yardages at the same time. ;)
Likewise. I plan on setting one up at 20, 25, 30, 35, 40, 45, and 50 yards. That's why I ordered seven.
I usually make my own spinners but I can't make these for this price.
-
Very much enjoying my target. Seems to hold up to .22 cal out of my Air King and D460 without issue.
I noticed this Chinese company Hiram sells a few other types of targets like a dueling tree, etc. I was hoping the coupon code might apply to some of them, no luck!
I have bought two of their HPA hand pumps. The price was right. The first one lasted a year even though I used the wrong oil. I bought a second one and fixed the first.
https://www.amazon.com/dp/B07RJR24X3/ref=cm_sw_em_r_mt_dp_0EP88KEB6ZGT3QQ5Z8D1?_encoding=UTF8&psc=1 (https://www.amazon.com/dp/B07RJR24X3/ref=cm_sw_em_r_mt_dp_0EP88KEB6ZGT3QQ5Z8D1?_encoding=UTF8&psc=1)
-
Now why are folks buying so many? What am I missing? Do I need to get a second one?
I ordered more because the price is ridiculous and I can set them at more yardages at the same time. ;)
Likewise. I plan on setting one up at 20, 25, 30, 35, 40, 45, and 50 yards. That's why I ordered seven.
I usually make my own spinners but I can't make these for this price.
Multiple yardages at the same time. Got it, thanks.
-
Now why are folks buying so many? What am I missing? Do I need to get a second one?
I ordered more because the price is ridiculous and I can set them at more yardages at the same time. ;)
Likewise. I plan on setting one up at 20, 25, 30, 35, 40, 45, and 50 yards. That's why I ordered seven.
I usually make my own spinners but I can't make these for this price.
Multiple yardages at the same time. Got it, thanks.
The multiple yardages at the same time help me practice hold under/over.
-
I was shooting one with my d34 .177 and it will only flip them if you hit it close to center. Kinda neat how it worked out because ot lets me know if the hit was direct or a near miss.....concentrate lol
-
My .25 Avenger is a bit too much for them at 35 - 40yds. if they are just free standing. I'm going to secure them to a board like I did my other ones.
The avenger does not damage the flippers but it will knock the whole target off it's feet.
-
My .25 Avenger is a bit too much for them at 35 - 40yds. if they are just free standing. I'm going to secure them to a board like I did my other ones.
The avenger does not damage the flippers but it will knock the whole target off it's feet.
Bill, I stuck some small tubing in the ground that lifts them up about 16" up from the ground. The legs just slip into them. It works great.
-
My .25 Avenger is a bit too much for them at 35 - 40yds. if they are just free standing. I'm going to secure them to a board like I did my other ones.
The avenger does not damage the flippers but it will knock the whole target off it's feet.
Bill, I stuck some small tubing in the ground that lifts them up about 16" up from the ground. The legs just slip into them. It works great.
I have a little different setup. I've got a large lighted target stand. It's an old parts inspection station from work. I got a few ideas. Thanks for the suggestion.
-
I used washer head screws to clamp down on the support rods, a .22 slinging a 21gr pellet will knock it around at 25 yards, but I'm going to use conduit to set them in at the range at 25 and 50, gotta have them high enough if I miss the round hits the berm instead of the ground. But steel targets are allowed so we're good
-
I painted 5 of these yellow this morning. They are so nice and they will work perfectly into future plans for another spinner rack if I choose to use them that way.
I've discovered that I can paint the back orange as they are easily reversed.
I admit I like these so well that I've order 5 additional sets.
Bonus is that I'll have 10 sets x10 target spots each set = 100 target stickers free
-
Paint both sides and just flip the target and legs around to use the other side.
-
I found the target stickers to be functionally worthless really
-
Or you can do dueling targets, one of you shoot the yellow side and the other one shoots the orange from the other side...
Nevermind! :-[
-
I found the target stickers to be functionally worthless really
I don't use them on steel at all, the adhesive makes a mess but I will use them on paper or cardboard.
-
Paint both sides and just flip the target and legs around to use the other side.
Yep, yellow on one side and orange on the other.
-
As with many of my sticker targets.. I arrange them on a sheet of printer paper and save as a master for printing targets.
-
As with many of my sticker targets.. I arrange them on a sheet of printer paper and save as a master for printing targets.
Brilliant!!!
-
Or you can do dueling targets, one of you shoot the yellow side and the other one shoots the orange from the other side...
Nevermind! :-[
Hahaha!!! ;D
-
I'm trying to come up with a vertical rack to stack four or five of them, one above the other with the bottom one a foot off the ground.
I've got and idea and a rough sketch.
I may shorten it to hold only two. I need to show the sketch to my son and see what we can do.
They will be able to slide into tubes welded on vertical uprights (1" sq tubing) so they can easily be pulled out and flipped over to reveal a freshly painted side.
-
I painted 5 of these yellow this morning. They are so nice and they will work perfectly into future plans for another spinner rack if I choose to use them that way.
I've discovered that I can paint the back orange as they are easily reversed.
I admit I like these so well that I've order 5 additional sets.
Bonus is that I'll have 10 sets x10 target spots each set = 100 target stickers free
Dan, FYI, mine won't function leaning back, only forward.
-
I painted 5 of these yellow this morning. They are so nice and they will work perfectly into future plans for another spinner rack if I choose to use them that way.
I've discovered that I can paint the back orange as they are easily reversed.
I admit I like these so well that I've order 5 additional sets.
Bonus is that I'll have 10 sets x10 target spots each set = 100 target stickers free
Dan, FYI, mine won't function leaning back, only forward.
Yeah but you can swing the support legs around 180° and shoot the other side.
-
This is my solution. I'm clearing some small trees to extend my range, so I decided to put them to good use. A 3/8 spade bit and some long screws is all it took. Raising them up higher means I don't have to shoot through the fence in the back yard.
-
I bought two more. I couldn't resist the deal.
-
I just added one to my Amazon order for $4.66. Thanks.
-
This is my solution. I'm clearing some small trees to extend my range, so I decided to put them to good use. A 3/8 spade bit and some long screws is all it took. Raising them up higher means I don't have to shoot through the fence in the back yard.
Looks good Eddie. Did you drill at an angle so the target would be leaning forward?
-
Looks good Eddie. Did you drill at an angle so the target would be leaning forward?
No, they're standing up straight. They still work if you hit them with enough energy, but I'm really not too concerned about it. As long as I can see them swinging or hear a ding, I know I have a hit.
-
Well...
did not find out till today... My son ordered 3 for me as a surprise (I guess for an early father's day)...
he told me this morning cause they are out for delivery... 3 for 14 something Wow... I thought getting the Crosman three spinner for 8 bucks a few years ago was a good deal... it is depressing to see the crosman price right now... $38.98 https://www.amazon.com/Spinning-177-Caliber-22-Caliber-Pellets-Version/dp/B08YYPZNF5?th=1 (https://www.amazon.com/Spinning-177-Caliber-22-Caliber-Pellets-Version/dp/B08YYPZNF5?th=1)
Thanks for the pics Ed... a much better look at what you get than the amazon pics...
-
Hmm... had to check thru the crosman store... $10.54 ... https://www.amazon.com/Crosman-CSLT-Spinning-Target-Metal/dp/B01786GBM4?ref_=ast_sto_dp&th=1&psc=1 (https://www.amazon.com/Crosman-CSLT-Spinning-Target-Metal/dp/B01786GBM4?ref_=ast_sto_dp&th=1&psc=1)
-
Had a little time before work this morning so I slipped outside with my coffee. Before I knew it I had collected a 1x12x4' board and 12 electrical wiring staples. I spaced 3 targets evenly on the board and drove the staples in around the legs to lock them onto the board. Now it's a one piece setup with 3 sets of resettable flipper targets. This will be incorporated into my 'birdcage' target fixture. You'll understand once I'm finished and post pictures.
-
Order two more Saturday with a in stock expected June 9th. Just got a email that they will be here tomorrow. Wish all my orders where that quick.
-
I ordered 2 more for a total of 4. Just got a notification thst they will arrive tomorrow along with a Daisy 35 for my wife.
-
I also received an email that the last five I ordered will be delivered tomorrow.
-
I received a text saying my two additional are arriving tomorrow.
-
5 I ordered should be here today! ;D
-
The last and final five that I ordered show they're out for delivery. That will bring my total to 10.
I must say I really like these targets and the fact that I can shoot them with my .22lr makes them all the more useful.
-
The last and final five that I ordered show they're out for delivery. That will bring my total to 10.
I must say I really like these targets and the fact that I can shoot them with my .22lr makes them all the more useful.
Mine too, that’ll make 7 sets for me. ;D
-
The last and final five that I ordered show they're out for delivery. That will bring my total to 10.
I must say I really like these targets and the fact that I can shoot them with my .22lr makes them all the more useful.
Mine too, that’ll make 7 sets for me. ;D
Yesterday, after shooting I left my 2 sets inside my 30 meter target boxes. I need to close the holes in the back with new steel and fill the holes with duct-seal. After I level the other target boxes, I’ll do the same and leave them in their respective target boxes. 8)
-
The last and final five that I ordered show they're out for delivery. That will bring my total to 10.
I must say I really like these targets and the fact that I can shoot them with my .22lr makes them all the more useful.
Mine too, that’ll make 7 sets for me. ;D
Yesterday, after shooting I left my 2 sets inside my 30 meter target boxes. I need to close the holes in the back with new steel and fill the holes with duct-seal. After I level the other target boxes, I’ll do the same and leave them in their respective target boxes. 8)
-
The last and final five that I ordered show they're out for delivery. That will bring my total to 10.
I must say I really like these targets and the fact that I can shoot them with my .22lr makes them all the more useful.
Mine too, that’ll make 7 sets for me. ;D
Yesterday, after shooting I left my 2 sets inside my 30 meter target boxes. I need to close the holes in the back with new steel and fill the holes with duct-seal. After I level the other target boxes, I’ll do the same and leave them in their respective target boxes. 8)
That looks great. Nice and tidy.
-
Looks like they are $22.99 now in the link.
-
The last and final five that I ordered show they're out for delivery. That will bring my total to 10.
I must say I really like these targets and the fact that I can shoot them with my .22lr makes them all the more useful.
Mine too, that’ll make 7 sets for me. ;D
Yesterday, after shooting I left my 2 sets inside my 30 meter target boxes. I need to close the holes in the back with new steel and fill the holes with duct-seal. After I level the other target boxes, I’ll do the same and leave them in their respective target boxes. 8)
That looks great. Nice and tidy.
Thanks, Brother Dan!
-
Looks like they are $22.99 now in the link.
Once you get to checkout, put in coupon code: MXWF7M8W
It still works. Brings it down to $4.60 plus tax. ($4.97 in my case)
-
Looks like they are $22.99 now in the link.
Once you get to checkout, put in coupon code: MXWF7M8W
It still works. Brings it down to $4.60 plus tax. ($4.97 in my case)
Thanks. At that price I had to order one.
-
Great bargain! Ten for under $50.
To me this is as good at the $7.50 deal on the P17 pistols a while back.
-
Yes Sir(s)!!!
-
Took one to the range this morning, at 50 yards with an H&N "18" 18.13gr, the Cayden hits more than hard enough to flip the paddles ")
https://youtu.be/ha_0Si65bR8
-
Great target and I have 4 of them.
One target is about 60-65 yards away.
The paddles cannot be flipped when shooting .177 CPHP at about 900-920 FPS.
The paddles can be flipped when shooting .22 CPHP at about780-800 FPS.
-
Nice shooting. Got mine today. I was amazed at how thick the targets are. What a deal!!!
-
OK Hurry ! I got 4 and there were only 12 left, showed them to my locals and they wanted some too.
-
Mine said arriving today but they didn't. Tracking says the Post office doesn't even have them yet. My wife's Daisy 35 came though.
-
Took one to the range this morning, at 50 yards with an H&N "18" 18.13gr, the Cayden hits more than hard enough to flip the paddles ")
https://youtu.be/ha_0Si65bR8
Nice shooting!!! 8)
-
Mine arrived today.
-
Took one to the range this morning, at 50 yards with an H&N "18" 18.13gr, the Cayden hits more than hard enough to flip the paddles ")
https://youtu.be/ha_0Si65bR8
Nice shooting!!! 8)
My nephew was posting video of him nailing steel plates at 700 yards, so the next step is 21gr pellets and 75 yards
-
Nice shooting and video Troy.
Good info Nick.
-
Phenomenal deal! Thank you and God bless! It says it is made for use with airguns. My brother only deals with firearms. I wonder if anyone has tested this with small calibers?
-
Phenomenal deal! Thank you and God bless! It says it is made for use with airguns. My brother only deals with firearms. I wonder if anyone has tested this with small calibers?
.22 long rifle are fine on these, impacts look just like my .25 DAR.
-
My DAR .25 smacks the snot out of them.... and they take it like a champ.
-
Same with my Flashpup .25. I hammered one paddle good at 20 yards and it took it like a champ.
-
I had to attach them to a board because my Avenger .25 would blow them over on impact. Once I secured the to a board they are good to go at my 35 - 40 yd range. I was also surprised that my Crosman Blaze NP .177 with 10.5 domes would flip them up and reset them as well.
-
I
Have one and I ordered one anyway :) can’t beat $5 ish
-
Mine already shipped and should be here tomorrow. It was shipped from only an hour and a half drive away too.
-
Dang, this is a steal! Tagging this thread for good measure. Thanks OP!
-
Typically these bargain deals go away fast... this one is unique in how long it's survived.
Sad thing is, once it's gone.. it's gone. I wouldn't hesitate if you are considering it.
-
Almost forgot I have 4 more IN route :o
-
I did a walk through on my range with the new spinners installed. I've got more work to do but it works for now. The last spinners are 60 yards from where I normally shoot from, but I can back up and get 75 out of it.
https://youtu.be/tSDkUvua7yA
-
I did a walk through on my range with the new spinners installed. I've got more work to do but it works for now. The last spinners are 60 yards from where I normally shoot from, but I can back up and get 75 out of it.
https://youtu.be/tSDkUvua7yA
Nice range, Eddie!
-
Nice range, Eddie!
Thanks! I complain about not having a 100 yards sometimes but I know I'm lucky to have what I do. I need to get off my butt, fire up the chainsaw and clear some more trees and make 100 a reality.
-
Sweet range there Eddie!
My target came in today, and I ordered it on Tuesday. :o Almost too good to be true.
Thanks again top the O.P. for sharing this.
-
set one of mine up... sent BBT 30g from 20ish fpe stock Maxi... 28ish fpe Urban... 32ish fpe Buccaneer... 44ish fpe AT 44L... 45ish fpe Maximum Maxi... oh 19ish fpe MK1322 pumper.. ;) 30 to 50 yards... did I spell satismafaction right..?
the'll do.. ;)
-
I just ordered 2 more of these target set to give as a gift to a friend's 9 yo grandson. I also gave him all my Crosman .177 pellets (~1,200) that are in tins and a few GAMO pellets I had.
-
I just got the Gauntlet yesterday and spent some time getting it dialed in but 7.9gr CPHP's just dont have enough OOMPH! To flip the paddles at 50 yards. :-\
-
Another four showed up today. Why did I need another four? I don't know. But at this price I don't see my self saying I wish I had not spent the money. ;D
-
I couldn't help myself and ordered 2 more to give as gifts. It said 6 remaining after my order.
-
I wonder how many were sold at this price?
I ordered a total of 12. I have already given 2 away as gifts.
-
I think the pellet shortage has caused a surplus of targets :)
-
The last and final five that I ordered show they're out for delivery. That will bring my total to 10.
I must say I really like these targets and the fact that I can shoot them with my .22lr makes them all the more useful.
Mine too, that’ll make 7 sets for me. ;D
Yesterday, after shooting I left my 2 sets inside my 30 meter target boxes. I need to close the holes in the back with new steel and fill the holes with duct-seal. After I level the other target boxes, I’ll do the same and leave them in their respective target boxes. 8)
Whoa, what a plinking heaven setup, Cap! Not to mention the distance boxes in the - distance...
-
Took one to the range this morning, at 50 yards with an H&N "18" 18.13gr, the Cayden hits more than hard enough to flip the paddles ")
https://youtu.be/ha_0Si65bR8
Hey, with that Cayden you have a two-in-one target, a resetting one plus a top spinner at the same time.
-
I did a walk through on my range with the new spinners installed. I've got more work to do but it works for now. The last spinners are 60 yards from where I normally shoot from, but I can back up and get 75 out of it.
https://youtu.be/tSDkUvua7yA
Really nice target arrangements ya got there! Do the resets still work the same way when mounted with the legs upright like that? Nice slim footprint vs. when unfolded. 8)
-
I think the pellet shortage has caused a surplus of targets :)
;D ;D I was wondering why they were so cheap! ;D ;D
Good one!
-
I had sworn off Amazon since, well you know why, and just for the heck of this post I went back to see. I wound up getting 2, there looks to be only 10 remaining. :o
-
I had sworn off Amazon since, well you know why, and just for the heck of this post I went back to see. I wound up getting 2, there looks to be only 10 remaining. :o
It said 6 remaining after I bought mine a few hours ago.
-
Ha! Now it says 11.
-
The last and final five that I ordered show they're out for delivery. That will bring my total to 10.
I must say I really like these targets and the fact that I can shoot them with my .22lr makes them all the more useful.
Mine too, that’ll make 7 sets for me. ;D
Yesterday, after shooting I left my 2 sets inside my 30 meter target boxes. I need to close the holes in the back with new steel and fill the holes with duct-seal. After I level the other target boxes, I’ll do the same and leave them in their respective target boxes. 8)
Whoa, what a plinking heaven setup, Cap! Not to mention the distance boxes in the - distance...
Thanks Charlie! 8)
-
Just ordered some! Thx!
And thank you Phil for reminding me about this deal
-
I have 5 of these targets and they will last me until the end or until someone steals them or shoots them with a cannon.
-
I have them at 50 and 75 yards. These are a great bargain and provide a very satisfying smack when hit! Even if you just stole the spinners off it to repurpose, these are well worth it. A reactive target is big fun and a welcome break from paper targets.
Scott
-
Yup you can only shoot paper so much, then you have to go down range and change it out. ;D
-
I agree. I shoot spinners, aluminum cans, or water bottles a lot more often than paper.
-
I can't be certain, its only been 5 days since I ordered my pair of these dudes, but I get the feeling they are about to begin to prepare to contemplate to attempt to start to commence to intend to originate some paperwork relating to said order. How very exciting. :o
-
I agree. I shoot spinners, aluminum cans, or water bottles a lot more often than paper.
Mini Bud Light cans placed upside down on 3" drywall screws in a 4x4. Not only do you have to knock them down, you also have to rip them off the screws. This requires shot placement to the sweet spots. Center shots just blow holes in the cans. Rim shots are the key... ;)
-
I can't be certain, its only been 5 days since I ordered my pair of these dudes, but I get the feeling they are about to begin to prepare to contemplate to attempt to start to commence to intend to originate some paperwork relating to said order. How very exciting. :o
But, are they "fixin' to"?
-
But, are they "fixin' to"?
No, but they got a "hankerin' to".
-
But, are they "fixin' to"?
No, but they got a "hankerin' to".
Maybe they are even "aimin' to".
-
But, are they "fixin' to"?
I don't think so, looks like they are only shipping one; and it ain't broke neither. :o ::) ;)
-
Just got mine yesterday. These things are thick and heavy! My .177 won’t flip them at 10 yards.... until I took a grinder to the back of the paddle and drilled some holes in the neck.
Now I can flip all 4 at 40 yards with a .177 and my .22 doesn’t damage it at all. Took some time too, to grind each paddle took close to 30min of just grinding. About 5 minutes of drilling.
So yes a long project, but well worth it in the end!
-
Just got mine yesterday. These things are thick and heavy! My .177 won’t flip them at 10 yards.... until I took a grinder to the back of the paddle and drilled some holes in the neck.
Now I can flip all 4 at 40 yards with a .177 and my .22 doesn’t damage it at all. Took some time too, to grind each paddle took close to 30min of just grinding. About 5 minutes of drilling.
So yes a long project, but well worth it in the end!
I really don't care if mine flip or not. As long as they swing I know I have a hit.
-
Just got mine yesterday. These things are thick and heavy! My .177 won’t flip them at 10 yards.... until I took a grinder to the back of the paddle and drilled some holes in the neck.
Now I can flip all 4 at 40 yards with a .177 and my .22 doesn’t damage it at all. Took some time too, to grind each paddle took close to 30min of just grinding. About 5 minutes of drilling.
So yes a long project, but well worth it in the end!
I really don't care if mine flip or not. As long as they swing I know I have a hit.
Same here.
-
I dropped 10 of my 46gr .25 pellets on the paddles at 50 yards and they sure did flip the paddles.... and then some! They knocked the bar too far upon impact and got released from the hold. The release paddle did 4 good spins then one last lazy one.
I think the .25 with 46gr slugs is a little hot... ::)
-
I dropped 10 of my 46gr .25 pellets on the paddles at 50 yards and they sure did flip the paddles.... and then some! They knocked the bar too far upon impact and got released from the hold. The release paddle did 4 good spins then one last lazy one.
I think the .25 with 46gr slugs is a little hot... ::)
My .25 Flashpup does the same thing with 25.4 grain pellets out to 30 yards. Haven't tried it further than that.
-
Code still works. I just ordered 2 for a total of $10.10 to my door. I'll add these to my other swingers. THANKS!!
-
I agree. I shoot spinners, aluminum cans, or water bottles a lot more often than paper.
Mini Bud Light cans placed upside down on 3" drywall screws in a 4x4. Not only do you have to knock them down, you also have to rip them off the screws. This requires shot placement to the sweet spots. Center shots just blow holes in the cans. Rim shots are the key... ;)
Hey! I may know a guy in that pic! ;)
-
I agree. I shoot spinners, aluminum cans, or water bottles a lot more often than paper.
Mini Bud Light cans placed upside down on 3" drywall screws in a 4x4. Not only do you have to knock them down, you also have to rip them off the screws. This requires shot placement to the sweet spots. Center shots just blow holes in the cans. Rim shots are the key... ;)
Hey! I may know a guy in that pic! ;)
LOL... you should know all 3.
-
Mine are flipping just fine at 75 yards with 18.13’s @ 890fps. Sometimes the last outside paddle will knock the opposite outside paddle back down, so I aim a little higher and the last one will stay up. Again, thanks for posting about these, big bargain when bargains seem rare.
Scott
-
What a smoking deal, I just ordered 2 for $9.76 delivered!
-
The amazing thing about this deal is, every first shot on these are dead center, so not to ruin the group I set up another one with fresh paint or stickers and leave the other set as is for proof, now if I can remember what I shot them with :-[ ??? ::) :-\
-
The amazing thing about this deal is, every first shot on these are dead center, so not to ruin the group I set up another one with fresh paint or stickers and leave the other set as is for proof, now if I can remember what I shot them with :-[ ??? ::) :-\
I think you should buy more and keep shooting them until you hit one off center. ;D ;D
Of course there is the back side too.
Perhaps this could be a new competition.
-
I need to come up with a new way to mount them... the .25 cal guns know them out of the hurry up electrical staple mount I did. Next I'll drill holes in the wood for the legs. Just another addition to the 'to do' list... :o
-
A 3/8 inch paddle bit works great and gives a little wiggle room.
-
I'll most likely do something like that... just a bit more forward lean to them.
-
A little lean will help if you want them to flip. I decided before I mounted them that swinging would be good enough for me.
-
Got mine today. The targets are 1 3/4 inches in diameter. Smaller than I thought they'd be but for about $5 these are great. Thanks for posting this deal.
-
I drilled holes on an an angle in a 6' 4x4 today. I drilled them for the targets to lean forward and function as intended. I also drilled the holes so the legs would fit in snug about 2" deep. Works great.
-
My neighbor reports these are not up to .223. Punches holes right through it.
-
My neighbor reports these are not up to .223. Punches holes right through it.
Probably not good for a howitzer either.... lol
-
My neighbor reports these are not up to .223. Punches holes right through it.
I have one rated for PB handguns. Hit it with a 405 grain subsonic and put a big dent in it. Turned it around and hit it with another one from the other side and straightened it back out. A coat of paint and you couldn't tell anything happened. Now your neighbor has a whole new challenge... Shoot .177 pellets through the hole without hitting the paddle.
-
My neighbor reports these are not up to .223. Punches holes right through it.
I have one rated for PB handguns. Hit it with a 405 grain subsonic and put a big dent in it. Turned it around and hit it with another one from the other side and straightened it back out. A coat of paint and you couldn't tell anything happened. Now your neighbor has a whole new challenge... Shoot .177 pellets through the hole without hitting the paddle.
[chuckling]
-
I just checked. This promo still works.
https://www.amazon.com/HIRAM-Resetting-Portable-Shooting-Rimfire/dp/B07T68Q5F5 (https://www.amazon.com/HIRAM-Resetting-Portable-Shooting-Rimfire/dp/B07T68Q5F5)
PROMO CODE. MXWF7M8W
$4.60 after entering the PROMO code.
I know because I just ordered one.
-
I just mounted two on my 60 yard spinner and plate rack.
-
I just mounted two on my 60 yard spinner and plate rack.
Sweet setup, Dan!
-
I just mounted two on my 60 yard spinner and plate rack.
Sweet setup, Dan!
Thanks David. I'm always looking for new ideas to keep my range exciting as well as challenging.
-
Thanks, ordered 2 :)
For $10 to my door how could I resist?
Thanks again
Jeff
-
I have to wonder if this isn't a glitch in the system, Amazon won't let code users post reviews apparently suspecting the company is giving it away for reviews, but they haven't canceled the code, every sporting goods store in the area has a similar target and none are under $20
-
I just mounted two on my 60 yard spinner and plate rack.
Sweet setup, Dan! And thanks for the tip, I think I have seven now. Who says I can’t order a few or 5 more? Haha! ;)
-
I just mounted two on my 60 yard spinner and plate rack.
Sweet setup, Dan! And thanks for the tip, I think I have seven now. Who says I can’t order a few or 5 more? Haha! ;)
Thanks John, I really like your new plates as well.
And as far as these HIRAM resettable targets. I think I have a dozen. I'm using 6 right now with the others stored for future use.
-
Thanks. I should receive two (2) of them Tuesday for $4.98 each.
This may be like printers wherein the money is in the ink/stickies not the printer/spinners?
-
I received the 2 I ordered a few days ago, looking forward to setting one of them up in the backyard range.
Jeff
-
Count me in for 2. Thanks
-
3:30 AM, one left, code did not work.
3:40, clicked on other sellers, at the bottom past used ones Hiram Direct, code worked. ordered 3, dont need, but could not resist.
https://www.amazon.com/gp/product/B07T68Q5F5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 (https://www.amazon.com/gp/product/B07T68Q5F5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1)
original link went to different vendor, not Hiram direct.
-
Thanks. I should receive two (2) of them Tuesday for $4.98 each.
This may be like printers wherein the money is in the ink/stickies not the printer/spinners?
Yepper, two targets arrived on schedule. I set one of 'em up and shot it with my open sighted .177 HW30S at 25 yards this morning. I could wiggle 'em but they are too heavy to flip with 7.33 gr. JSB Exacts at that distance.
-
Thanks. I should receive two (2) of them Tuesday for $4.98 each.
This may be like printers wherein the money is in the ink/stickies not the printer/spinners?
Yepper, two targets arrived on schedule. I set one of 'em up and shot it with my open sighted .177 HW30S at 25 yards this morning. I could wiggle 'em but they are too heavy to flip with 7.33 gr. JSB Exacts at that distance.
Greg my R7 shooting 8.64 gr wouldn't flip them except every once in a while. I moved it to 20 yards and didn't have any problems flipping them at that distance.
-
Thanks. I should receive two (2) of them Tuesday for $4.98 each.
This may be like printers wherein the money is in the ink/stickies not the printer/spinners?
Yepper, two targets arrived on schedule. I set one of 'em up and shot it with my open sighted .177 HW30S at 25 yards this morning. I could wiggle 'em but they are too heavy to flip with 7.33 gr. JSB Exacts at that distance.
Greg my R7 shooting 8.64 gr wouldn't flip them except every once in a while. I moved it to 20 yards and didn't have any problems flipping them at that distance.
Hmmm? Even the mighty FWB Sport won't flip 'em at 25 ysrds with 8.64 gr. H&N FTT'S. I guess I could move 'em in closer, but what's the fun in that?
-
Thanks. I should receive two (2) of them Tuesday for $4.98 each.
This may be like printers wherein the money is in the ink/stickies not the printer/spinners?
Yepper, two targets arrived on schedule. I set one of 'em up and shot it with my open sighted .177 HW30S at 25 yards this morning. I could wiggle 'em but they are too heavy to flip with 7.33 gr. JSB Exacts at that distance.
Greg my R7 shooting 8.64 gr wouldn't flip them except every once in a while. I moved it to 20 yards and didn't have any problems flipping them at that distance.
Hmmm? Even the mighty FWB Sport won't flip 'em at 25 ysrds with 8.64 gr. H&N FTT'S. I guess I could move 'em in closer, but what's the fun in that?
I drilled a bunch of holes in the back of the paddles and lightened it up. Don’t drill too deep of course. Now I can flip em at 30 yards with a 2240 carbine. My .177 break barrel and gauntlet flip em at 40 yards after the mod.
I have 3 sets, first set I spent 2+ hours grinding it down. So I ended up drilling the holes on the other 2 sets in much less time. Both ways work very well. Still feel solid and no bending or denting even with my .22LR
-
Thanks. I should receive two (2) of them Tuesday for $4.98 each.
This may be like printers wherein the money is in the ink/stickies not the printer/spinners?
Yepper, two targets arrived on schedule. I set one of 'em up and shot it with my open sighted .177 HW30S at 25 yards this morning. I could wiggle 'em but they are too heavy to flip with 7.33 gr. JSB Exacts at that distance.
Greg my R7 shooting 8.64 gr wouldn't flip them except every once in a while. I moved it to 20 yards and didn't have any problems flipping them at that distance.
Hmmm? Even the mighty FWB Sport won't flip 'em at 25 ysrds with 8.64 gr. H&N FTT'S. I guess I could move 'em in closer, but what's the fun in that?
Looks like Austin has a solution for that Greg.
-
Good job Austin.
-
just ordered two more, code is still good
-
just ordered two more, code is still good
Really? WOW
-
I ordered several, brought one to my faux brother in law, he had bought several and one for me!
-
I ended up with twelve of these. Six are on the ground currently and six are still in their boxes.
Too good of a deal to pass up.
-
Taking one down to my nephews range in a few weeks, wanna see what .308 rounds will do ")
-
Taking one down to my nephews range in a few weeks, wanna see what .308 rounds will do ")
Haha, don't think the spinners will hold up as well with .30 cal rounds flying into them ;)
But it'll be fun to see!
-
Wow, Code still working. I got one of these when it was first posted and now just picked up 5 more.
-
I've got one in an opened box if anyone wants it and will pay postage/UPS or will pick it up.
-
Wow, Code still working. I got one of these when it was first posted and now just picked up 5 more.
I'm amazed it is still working. They must have seriously overstocked.