• Jefferson State Airrifles
  • Air Gun Web - Expert Airgun Reviews
  • Hajimoto Productions
  • Airgun Angie - Backyard Shooting
  • Nielsen Specialty Ammo
  • Dynamic Air Rifles
  • FX Airguns
  • DonnyFL - When silence is a priority
  • Airgun Archery Fun
  • Pyramyd Air
  • Saber Tactical
  • New England Airgun
  • Umarex Airguns
  • Contact us
  • Utah Airguns
  • SEKHMET Airgun Accessories
  • Freedom Gun Targets
  • Evanix Airguns at Airgun Pro Shop
Jefferson State Airrifles
Air Gun Web - Expert Airgun Reviews
Hajimoto Productions
Airgun Angie - Backyard Shooting
Nielsen Specialty Ammo
Dynamic Air Rifles
FX Airguns
DonnyFL - When silence is a priority
Airgun Archery Fun
Pyramyd Air
Saber Tactical
New England Airgun
Umarex Airguns
Contact us
Utah Airguns
SEKHMET Airgun Accessories
Freedom Gun Targets
Evanix Airguns at Airgun Pro Shop


Author Topic: Will the R.A.I 1377 AR stock adapter fit marauder pistols?  (Read 107 times))

Offline w1tekwang

  • Shooter
  • *
  • Posts: 3
  • yes
  • Real Name: Ying
Will the R.A.I 1377 AR stock adapter fit marauder pistols?
« on: September 14, 2021, 11:43:32 PM »
Wondering if anyone have experience with R.A.I AR stock adapters selling on Ebay? will the 1377 ones fit for Marauder pistols? seems 1377 is the same as marauder pistol, and 2240/2250 is different right?
also am i the only one who think this CNC piece of metal is so overpriced? thanks all!
  • USA, CA, Encino

Offline buldawg76

  • GTA Senior Contributor
  • ******
  • Posts: 4071
  • yes
  • Real Name: Mike
Re: Will the R.A.I 1377 AR stock adapter fit marauder pistols?
« Reply #1 on: September 15, 2021, 01:53:39 AM »
RAI adapter for the 13xx, 22xx, 24xx series guns will not fit the Prod pistol without having to drill the 2 rear breech hold down screw holes in the adapter. The 13xx, 22xx, 24xx adapter uses one threaded hole 180 degrees apart on top and bottom of adapter. The Prod use one threaded hole in the center on the bottom and 2 threaded holes on top about 1/4" either side of center. Holes are at a sharp angle in the side of adapter so fairly difficult to drill them in correct locations but not impossible.

BD
  • Oxford, Alabama
Benjamin Marauder 177 in Boyds blaster stock 
Benjamin Marauder25 Wicked Air rifles bottled
Hatsan 22 AT 44S10 long
FWB 124 177 Tuned
FWB 300s Match L 177 Tuned
FWB 300s Match Junior 177 Tuned
Diana 48 177 Vortek Tuned
Xisisco 60C PCP Tuned 22
Xisisco 60C PCP 177 tuned LW barrel
Benjamin Titan NP 22 Tuned GRT trigger
Crosman Titan GP 22 Tuned GRT trigger
Crosman Venom 177 Tuned GRT trigger
Taipan Mutant Standard 22, BSA FFP 4x14x44 scope
TX200 , TL 22mm kit 177
B-40, TL 22mm kit 177
B50 in 51 stock Tuned .177
CH2009 challenger 177
1720T carbine regulated 177
Prod carbine with AR butt stock 22
CZ200 regulated 177
C9 silver streak 20 rocker safety
Crosman 1400 X 2 177 and 22
B28 Mike Melick tuned 25
Hatsan flash 25
Daisy 853 X 5 177
B3-2 177
Benji Maximus 177 Mrod trigger
QB 78/79 177 and 22 HPA bottled
HW Blue Laminate 97 .22cal tuned
1966 Diana model 60 Tyro resealed and tuned




Bikes, Guns and Family is all I need for a good day

Offline Rick67

  • GTA Senior Contributor
  • ******
  • Posts: 3609
  • yes
  • Real Name: Richard
Re: Will the R.A.I 1377 AR stock adapter fit marauder pistols?
« Reply #2 on: September 15, 2021, 07:51:48 AM »
And the 13xx tube is of smaller diameter.
  • Abq., NM, USA

Offline w1tekwang

  • Shooter
  • *
  • Posts: 3
  • yes
  • Real Name: Ying
Re: Will the R.A.I 1377 AR stock adapter fit marauder pistols?
« Reply #3 on: September 16, 2021, 02:52:50 PM »
RAI adapter for the 13xx, 22xx, 24xx series guns will not fit the Prod pistol without having to drill the 2 rear breech hold down screw holes in the adapter. The 13xx, 22xx, 24xx adapter uses one threaded hole 180 degrees apart on top and bottom of adapter. The Prod use one threaded hole in the center on the bottom and 2 threaded holes on top about 1/4" either side of center. Holes are at a sharp angle in the side of adapter so fairly difficult to drill them in correct locations but not impossible.

BD

Thanks BD for your feedback, however i am really confused as many sellers advertise RAI 001 for both 13XX and Prod. such as below
ebay.com/itm/273027286883
newenglandairgun.com/store/p4235/RAI-A001_Adjustable_Stock_Adapter_for_Crosman_air_pistols.html

any additional insights much appreciated
  • USA, CA, Encino

Offline buldawg76

  • GTA Senior Contributor
  • ******
  • Posts: 4071
  • yes
  • Real Name: Mike
Re: Will the R.A.I 1377 AR stock adapter fit marauder pistols?
« Reply #4 on: September 17, 2021, 02:05:47 AM »
Ying

The RAI 001 adapter fits the BP2220 marauder .22 cal pistol and the 1720T/1701 .177cal pistols that share the same breech to tube mounting bolt pattern if 2 bolts securing the breech to the rear end cap and two bolts at the front of breech going into the valve.

The 2240, 2300 and 1322/1377 use only one screw for front and rear of breech. See first three below for BP2220.1720T and 1701P

file:///C:/Users/Michael/Downloads/BP2220-EVP%20&%20PL.pdf

file:///C:/Users/Michael/Downloads/1720T%20EVP%20&%20PL%20(1).PDF

file:///C:/Users/Michael/Downloads/1701%20EVP%20&%20PL%20(1).pdf

Then 1322/1377 and 2240/2300

file:///C:/Users/Michael/Downloads/1322%20EVP%20&%20PL4%20(1).pdf

file:///C:/Users/Michael/Downloads/2240%20EVP%20-%20PL%20%20%20(3-3-16).pdf

file:///C:/Users/Michael/Downloads/2300S-EVP2%20MFD%205-3-07.pdf

Here is the RAI adapter info.

https://www.newenglandairgun.com/store/p4235/RAI-A001_Adjustable_Stock_Adapter_for_Crosman_air_pistols.html

BD



  • Oxford, Alabama
Benjamin Marauder 177 in Boyds blaster stock 
Benjamin Marauder25 Wicked Air rifles bottled
Hatsan 22 AT 44S10 long
FWB 124 177 Tuned
FWB 300s Match L 177 Tuned
FWB 300s Match Junior 177 Tuned
Diana 48 177 Vortek Tuned
Xisisco 60C PCP Tuned 22
Xisisco 60C PCP 177 tuned LW barrel
Benjamin Titan NP 22 Tuned GRT trigger
Crosman Titan GP 22 Tuned GRT trigger
Crosman Venom 177 Tuned GRT trigger
Taipan Mutant Standard 22, BSA FFP 4x14x44 scope
TX200 , TL 22mm kit 177
B-40, TL 22mm kit 177
B50 in 51 stock Tuned .177
CH2009 challenger 177
1720T carbine regulated 177
Prod carbine with AR butt stock 22
CZ200 regulated 177
C9 silver streak 20 rocker safety
Crosman 1400 X 2 177 and 22
B28 Mike Melick tuned 25
Hatsan flash 25
Daisy 853 X 5 177
B3-2 177
Benji Maximus 177 Mrod trigger
QB 78/79 177 and 22 HPA bottled
HW Blue Laminate 97 .22cal tuned
1966 Diana model 60 Tyro resealed and tuned




Bikes, Guns and Family is all I need for a good day

Offline Rick67

  • GTA Senior Contributor
  • ******
  • Posts: 3609
  • yes
  • Real Name: Richard
Re: Will the R.A.I 1377 AR stock adapter fit marauder pistols?
« Reply #5 on: September 17, 2021, 02:28:41 AM »
The best AR adapters for the 17xx/PROD, 13xx, and 22xx are from Canada:



https://www.gatewaytoairguns.org/GTA/index.php?topic=129415.40



Got 5 of his.
  • Abq., NM, USA