Quote from: EdinGa on September 25, 2022, 11:45:43 AMThe credit card trigger mod and barrel tape mod would be at the top of my list to improve accuracy if cleaning isn't helpful. How many pumps are you using? My 901 shoots 7 grain pellets best at 5 pumps.I hadn't heard of the credit card trigger mod.. What's that about?I knew Stonykill had posted how to mod the trigger by removing the flat piece and change the contour of the trigger and sear, but what does the credit card mod do?And where does one find the patch worm?
The credit card trigger mod and barrel tape mod would be at the top of my list to improve accuracy if cleaning isn't helpful. How many pumps are you using? My 901 shoots 7 grain pellets best at 5 pumps.
Quote from: Underdog on September 30, 2022, 10:04:32 AMQuote from: EdinGa on September 25, 2022, 11:45:43 AMThe credit card trigger mod and barrel tape mod would be at the top of my list to improve accuracy if cleaning isn't helpful. How many pumps are you using? My 901 shoots 7 grain pellets best at 5 pumps.I hadn't heard of the credit card trigger mod.. What's that about?The credit card trigger mod is basically just making a little washers out of pieces of credit card to put on either side of the trigger because it has a lot of side to side movement inside of the housing.
Quote from: EdinGa on September 25, 2022, 11:45:43 AMThe credit card trigger mod and barrel tape mod would be at the top of my list to improve accuracy if cleaning isn't helpful. How many pumps are you using? My 901 shoots 7 grain pellets best at 5 pumps.I hadn't heard of the credit card trigger mod.. What's that about?
Quote from: Underdog on September 30, 2022, 10:04:32 AMQuote from: EdinGa on September 25, 2022, 11:45:43 AMThe credit card trigger mod and barrel tape mod would be at the top of my list to improve accuracy if cleaning isn't helpful. How many pumps are you using? My 901 shoots 7 grain pellets best at 5 pumps.I hadn't heard of the credit card trigger mod.. What's that about?I knew Stonykill had posted how to mod the trigger by removing the flat piece and change the contour of the trigger and sear, but what does the credit card mod do?And where does one find the patch worm?The credit card trigger mod actually works better with a thinner gift card.https://www.gatewaytoairguns.org/GTA/index.php?topic=116786.0http://www.patchworm.com/patchworm.html
I ordered some air venturi moly paste tonight so I will get the trigger work done when it comes in.
Thanks for the info on the patchworm. I got mine in the other day and started using it. It works well. I'm just afraid that the sharp edges on my breech is going to cut it up and eventually break it.This looks just like the green trimmer line that I used previously. Only it looks to have some thick shrink tubing on the end to keep the patches on. Looks like the stuff they put on electrical connectors.I wonder where to get that tubing?
Quote from: Underdog on October 11, 2022, 11:27:36 AMThanks for the info on the patchworm. I got mine in the other day and started using it. It works well. I'm just afraid that the sharp edges on my breech is going to cut it up and eventually break it.This looks just like the green trimmer line that I used previously. Only it looks to have some thick shrink tubing on the end to keep the patches on. Looks like the stuff they put on electrical connectors.I wonder where to get that tubing?I have a sneaky suspicion that tubing is adhesive lined heat shrink tubing it's widely available in fact I have a 50 ft roll of it at home. I'm not sure what sharp edges you're worried about. The plastic of the patch worm is pretty soft I can't see it damaging anything on an air gun.
Quote from: Freezypellets on October 11, 2022, 11:36:41 AMQuote from: Underdog on October 11, 2022, 11:27:36 AMThanks for the info on the patchworm. I got mine in the other day and started using it. It works well. I'm just afraid that the sharp edges on my breech is going to cut it up and eventually break it.This looks just like the green trimmer line that I used previously. Only it looks to have some thick shrink tubing on the end to keep the patches on. Looks like the stuff they put on electrical connectors.I wonder where to get that tubing?I have a sneaky suspicion that tubing is adhesive lined heat shrink tubing it's widely available in fact I have a 50 ft roll of it at home. I'm not sure what sharp edges you're worried about. The plastic of the patch worm is pretty soft I can't see it damaging anything on an air gun.It's not the gun I'm worried about! It's breaking the brand new patch worm that I'm worried about - it already has scratch marks on it.
I did the ronno6 trigger mod and even though I lost the new trigger spring I ended up having a handy one in a bag of springs from harbor freight and the trigger is feather weight and very crisp. I think it's improved my accuracy but my biggest limitation is currently the open sights and my eyes so I can't say just how much better it is yet.
Quote from: Freezypellets on October 31, 2022, 11:30:32 PMI did the ronno6 trigger mod and even though I lost the new trigger spring I ended up having a handy one in a bag of springs from harbor freight and the trigger is feather weight and very crisp. I think it's improved my accuracy but my biggest limitation is currently the open sights and my eyes so I can't say just how much better it is yet.These scopes are a great deal for the money. I put one on my 880 and love it.You'll need these rings, these are SWEET for $11.