Thank you to our advertisers!







Author Topic: Xisico JTS GX-E-CS3 Compressor In Stock  (Read 22008 times))

Offline 7624452

  • GTA Senior Contributor
  • ******
  • Posts: 16780
  • R.D.O.T.I.W., USA, DOD, DAV Retired
  • Real Name: Art
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #400 on: July 30, 2022, 05:33:36 PM »
What is the correct size for the bearing ?
  • Stranded in California
(Sorry, but you are not allowed to access the gallery)

Offline airrob

  • Plinker
  • **
  • Posts: 171
  • yes
  • Real Name: Robert
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #401 on: August 01, 2022, 08:21:11 PM »
So mine decided to stop compressing (or sending) air to my PCP today, after less than an hour of work on the total clock.  All sounds indicate normal operation, except the needle doesn't move. Any ideas?
  • Cleveland, OH
Beeman R7 .20
Brocock Concept XR .22
Taipan Veteran Standard .22

Offline Back_Roads

  • I Got A 15 Pump BB Gun :) BB Guns Got Much More Complicated :)
  • GTA Senior Contributor
  • ******
  • Posts: 11013
  • 1st Edition Crosman 760 Pump Master
    • Back_Roads Airguning
  • Real Name: James Seiler
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #402 on: August 01, 2022, 08:40:30 PM »
 Sounds like crud buildup in a reed valve .
  • Wisconsin Collins Hunters Paradise" There's a Sign in Town to Prove It :)

Online avator

  • GTA Senior Contributor
  • ******
  • Posts: 38239
  • Happiness is a warm airgun... -Lennon Modded-
  • Real Name: Bill
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #403 on: August 02, 2022, 10:07:44 AM »
Sounds like crud buildup in a reed valve .
After an hour runtime?
  • From deep within the Rabbit Hole, Alabama

Offline oldpro

  • GTA
  • Administrator
  • GTA Senior Contributor
  • *****
  • Posts: 10664
  • yes
  • Real Name: Travis
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #404 on: August 02, 2022, 10:08:06 AM »
So mine decided to stop compressing (or sending) air to my PCP today, after less than an hour of work on the total clock.  All sounds indicate normal operation, except the needle doesn't move. Any ideas?
Did you clean the check valve on the bottom under the brass nut yet?
  • Katy, Texas
Raptor mini 2 in .25
Huben k1 .22
Diana 56
FX tarantula
Walther R8
LCS SK-19
Airacudas

Offline airrob

  • Plinker
  • **
  • Posts: 171
  • yes
  • Real Name: Robert
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #405 on: August 02, 2022, 10:27:25 AM »
OK I should have tried the test plug.  It does build up pressure now.

I tried two different fill probes for two PCP guns I have, and both did not fill properly which is why I assumed it was the compressor.

The only thing both fill probes have in common is this piece Iím pointing to.  Could that be it?
  • Cleveland, OH
Beeman R7 .20
Brocock Concept XR .22
Taipan Veteran Standard .22

Offline oldpro

  • GTA
  • Administrator
  • GTA Senior Contributor
  • *****
  • Posts: 10664
  • yes
  • Real Name: Travis
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #406 on: August 03, 2022, 11:04:04 AM »
 Try replacing the oring in the female foster
  • Katy, Texas
Raptor mini 2 in .25
Huben k1 .22
Diana 56
FX tarantula
Walther R8
LCS SK-19
Airacudas

Offline Back_Roads

  • I Got A 15 Pump BB Gun :) BB Guns Got Much More Complicated :)
  • GTA Senior Contributor
  • ******
  • Posts: 11013
  • 1st Edition Crosman 760 Pump Master
    • Back_Roads Airguning
  • Real Name: James Seiler
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #407 on: August 03, 2022, 11:05:05 PM »
OK I should have tried the test plug.  It does build up pressure now.

I tried two different fill probes for two PCP guns I have, and both did not fill properly which is why I assumed it was the compressor.

The only thing both fill probes have in common is this piece Iím pointing to.  Could that be it?

The one to the right of the one by your finger is definitely a test plug.
  • Wisconsin Collins Hunters Paradise" There's a Sign in Town to Prove It :)

Offline 7624452

  • GTA Senior Contributor
  • ******
  • Posts: 16780
  • R.D.O.T.I.W., USA, DOD, DAV Retired
  • Real Name: Art
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #408 on: August 06, 2022, 05:37:46 PM »
I bought one of these from Wes when they first came out (oil free).  There was a huge controversy about whether or not they should be filled with oil or not that lasted for several months.  I finally decided not to add the oil and it has not failed yet.  If this bearing is necessary I would like to know if one can be purchased of the correct size as I would have difficulty cutting it.
  • Stranded in California
(Sorry, but you are not allowed to access the gallery)

Offline oldpro

  • GTA
  • Administrator
  • GTA Senior Contributor
  • *****
  • Posts: 10664
  • yes
  • Real Name: Travis
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #409 on: September 08, 2022, 03:08:21 PM »
OK I should have tried the test plug.  It does build up pressure now.

I tried two different fill probes for two PCP guns I have, and both did not fill properly which is why I assumed it was the compressor.

The only thing both fill probes have in common is this piece Iím pointing to.  Could that be it?


  That piece screws into the probe to make it connect to the whip via the female foster. My suggestion is this, if it builds pressure with the test plug in then I would hook the whole system up to the gun and dip the fill probe and gun fill port under water and run the machine. you should see where the bubbles come out of.
 
  • Katy, Texas
Raptor mini 2 in .25
Huben k1 .22
Diana 56
FX tarantula
Walther R8
LCS SK-19
Airacudas

Offline Wayne52

  • GTA Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 30378
  • Real Name: Wayne
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #410 on: September 09, 2022, 07:06:36 AM »
Travis after a long time of using my tank adapter needed some TLC, I ordered two seals for my North Shore bleeder and a new 7K fill whip for it,  I was awestruck when I ordered  and received it the next day.  Very happy with North Shore compressors prompt class A shipping methods.  It was the same experience every time I've ordered from them but this is the first time it arrived the next day.
  • Michigan
HHDSUPCOM Cam Rahn Bay VN 71-72

My F10 Shoebox rocks 8)

Offline oldpro

  • GTA
  • Administrator
  • GTA Senior Contributor
  • *****
  • Posts: 10664
  • yes
  • Real Name: Travis
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #411 on: September 14, 2022, 07:09:15 PM »
Travis after a long time of using my tank adapter needed some TLC, I ordered two seals for my North Shore bleeder and a new 7K fill whip for it,  I was awestruck when I ordered  and received it the next day.  Very happy with North Shore compressors prompt class A shipping methods.  It was the same experience every time I've ordered from them but this is the first time it arrived the next day.

 Excellent Wayne!!!
  • Katy, Texas
Raptor mini 2 in .25
Huben k1 .22
Diana 56
FX tarantula
Walther R8
LCS SK-19
Airacudas