Thanks allIn 7 days- I will buy it-My SS supposed to arrive second Sun of the month and it did for yearsNow for reasons unknown-it arrives the Monday before the 2nd Wed-Monday comingSo if I haven't managed to entice too many folks here I will buy itIf sold out-then not to beDuke-so a barrel switch is all that is required?? Is the port that leaves the receiver the same size .177 .22 or is the difference of not much significants?ThanksCharlie
Where are you all finding these RWS/Diana closeouts on Numrich? I've seen a few posts/threads about this and cannot find anything on their website except for an out of stock Diana 34 wood stock.
I have heard the D34 has the same barrel as the 350....
Thanks for the link. Are these new in box? Hopefully these are legit German Diana's and not something like the mostly Walther parts guns that ended up being the 3400/3500's. Since the break up of RWS and Diana, who would support these? Umerex, Blueline, or ........?
A 34 has a different barrel breech block and will not fit or work on a 350. The 350 barrel breech block is longer, and the cocking linkage is pinned to it farther forward to accommodate the longer stroke of the 350.A 350 barrel will fit and work on a 34, but a new cocking linkage pin hole needs to be added to the rear of the original pin hole.
YesToo late-but worse case I could probably get maybe $170 or so if I sell it someday-65% is better than most hobbies- motorcycles -cars-photography-boats-Oh the online parts folks want 160 or so sterling-at $1.40 per with shipping pushing $250 for just a barrel-more or less the price of the rifleThanks allCharlie8500 .177 pellets 2500 .22 pellets-all lead free
Quote from: Jeff Marshall on November 30, 2021, 06:29:13 PMA 34 has a different barrel breech block and will not fit or work on a 350. The 350 barrel breech block is longer, and the cocking linkage is pinned to it farther forward to accommodate the longer stroke of the 350.A 350 barrel will fit and work on a 34, but a new cocking linkage pin hole needs to be added to the rear of the original pin hole.Good call, Jeff! I longer "have heard" that the barrels are interchangeable.