Forgot to post photo!
Quote from: casino7095 on November 04, 2021, 11:32:24 AMForgot to post photo!Is that the original shroud?How did you add the LDC?The shot string is very steep.Did you tune it to get more shots?
Just back off the hammer spring to zero preload and you should have about 20-22 good shots. The end of the barrel has a 1/2x20 NFC thread so you can add a moderator directly with 1/2x20 thread.
Also worth replacing the trigger spring to a lighter one. You can try the pen spring but I find that to be too light to work well. It is very easy to replace the spring. The hammer spring dimension is 3" in length, wire 0.045, OD 0.395, ID 0.295. Can someone recommend a lighter hammer spring?
Quote from: soupyyy on November 05, 2021, 02:10:46 AMAlso worth replacing the trigger spring to a lighter one. You can try the pen spring but I find that to be too light to work well. It is very easy to replace the spring. The hammer spring dimension is 3" in length, wire 0.045, OD 0.395, ID 0.295. Can someone recommend a lighter hammer spring?Try the same spring in a .042 or .041 wire diameter. Most compression springs are designed to fit over a shaft so the OD will actually be slightly less if you get the same .295ID.
Quote from: RichH on November 05, 2021, 05:54:57 AMQuote from: soupyyy on November 05, 2021, 02:10:46 AMAlso worth replacing the trigger spring to a lighter one. You can try the pen spring but I find that to be too light to work well. It is very easy to replace the spring. The hammer spring dimension is 3" in length, wire 0.045, OD 0.395, ID 0.295. Can someone recommend a lighter hammer spring?Try the same spring in a .042 or .041 wire diameter. Most compression springs are designed to fit over a shaft so the OD will actually be slightly less if you get the same .295ID.I go to - https://www.mcmaster.com/compression-springsThen filter first by the wire size and see what you get then you can play with the different variables and get an appropriate spring. Can you point a young fellah (to this sport) to the right place for these springs?
Quote from: abearden278 on November 05, 2021, 08:52:03 PMQuote from: RichH on November 05, 2021, 05:54:57 AMQuote from: soupyyy on November 05, 2021, 02:10:46 AMAlso worth replacing the trigger spring to a lighter one. You can try the pen spring but I find that to be too light to work well. It is very easy to replace the spring. The hammer spring dimension is 3" in length, wire 0.045, OD 0.395, ID 0.295. Can someone recommend a lighter hammer spring?Try the same spring in a .042 or .041 wire diameter. Most compression springs are designed to fit over a shaft so the OD will actually be slightly less if you get the same .295ID.Then filter first by the wire size and see what you get then you can play with the different variables and get an appropriate spring. Can you point a young fellah (to this sport) to the right place for these springs?
Quote from: RichH on November 05, 2021, 05:54:57 AMQuote from: soupyyy on November 05, 2021, 02:10:46 AMAlso worth replacing the trigger spring to a lighter one. You can try the pen spring but I find that to be too light to work well. It is very easy to replace the spring. The hammer spring dimension is 3" in length, wire 0.045, OD 0.395, ID 0.295. Can someone recommend a lighter hammer spring?Try the same spring in a .042 or .041 wire diameter. Most compression springs are designed to fit over a shaft so the OD will actually be slightly less if you get the same .295ID.Then filter first by the wire size and see what you get then you can play with the different variables and get an appropriate spring. Can you point a young fellah (to this sport) to the right place for these springs?