GTA
Target Shooting Matches, Discussion & Events => Shooting Match Gates => 10 Meter Off Hand Air Rifle Match => Topic started by: Hoosier Daddy on August 03, 2020, 02:19:21 PM
-
Hear Ye, Hear Ye!
The 9th match of the season is now open.
Rules and targets can be found here.... https://www.gatewaytoairguns.org/GTA/index.php?topic=114562.0 (https://www.gatewaytoairguns.org/GTA/index.php?topic=114562.0)
Due date for the scores and a scan of the target sheet for Match #9 is Sunday August 16th 2020.
Please include the following :
Call name or real name
Air rifle
Sighting system
Pellet and caliber
Score
Shoot whenever you can, be safe and have fun!
-
First time in this match...
bryan123
CMP 853 with modded trigger
Stock peep sight 5899
RMS Basic Wadcutters 7gr
194 / 200 7x
Emailing the target pic to Scott.. Can't post directly from company Samsung galaxy. This was so much more fun than 5m pistol!!
Thanks.
-
Duplicate
-
Dude... get the app "lit photo" it is so easy to resize your pics. ;D
I suggest 30%
-
Pic. Thanks
bryan123
CMP 853 with modded trigger
Stock peep sights
Rms basic .177 7gr Wadcutters
194/200 7x
Thanks.
-
Tucannon
2260
CP 4x32
.22 CPHP
Standing/ Offhand
186/200 4X
-
Tucannon
2260
CP 4x32
.22 CPHP
Standing/ Offhand
186/200 4X
Nice Shooting!!
That's the Crosman 2260, right? How do you like it and the scope? I'm thinking about getting a scope to use with my Daisy 901.
Thanks!
-
Nice Shooting!!
That's the Crosman 2260, right? How do you like it and the scope? I'm thinking about getting a scope to use with my Daisy 901.
Thanks!
Its the Sheridan 2260MB same thing, and one of my favorite air rifles to shoot, the scope works good for the old eyes.
-
Ammon 177
Chinese B3 .177
Iron sights
Rws 7gr.
Off hand
10m
8/15/20
182-200-0×
-
It's great to see a few more folks shooting again. The last few matches were looking pretty thin and I was gettin worried they might close these matches down. PS: I think I incorrectly scored the bottom right target as
2X but I think it should have been 1X. The score listed below is the correct one.
05/15/20
Kid Shelleen
Benjamin Disco .177
Hawke 3-9 @ 3
RWS MK 8.2 gr
Standing Unsupported
188/100 2X
-
Hi Jessie, I started a conversion on a Crosman 2260 way last year some time and never got around to finishing it. I put a steel breech on it, put in a smaller (Avenger- opened up a little) transfer port, .177 barrel, power adjuster (rva), cheap Daisy peep sights, and a homemade front diopter sight (which I haven't finished yet). I have shot it a few times here for the 10 meter match. I bought a short air tube for it and am planning to turn it into a short tube pcp. It's actually going to be the same as a .177 Disco. with a short air tube, except the valve will be pinned with HD screws so I'll tune it for 2,400/2,500 psi fill and play with the RVA so it's shooting just under 20FPE. I built a Disco version like this a few years back with a Lothar Walter barrel (via Avenger) and put a Boyds stock on it. It's a little on the heavy side with the Boyds varmint stock compared to the Crosman stock. Maybe I'll get around to finishing it sometime this year. I plan to do something with the stock because I'm not crazy about the "guppy" look. Thinking about shaving the "belly" down a little so it doesn't look so pregnant. lol.
-
That's a nice project Mike!
-
Match first timer, and first match post. Fighting with my phone to get a small enough file size. I hope I get this right.
MWGM2020 - Stephen
Fortitude Gen2 .22 Cal
UTG 3x9x40 AO IR
CPHP .22 14.3 Grains
200/178X-3=175 1X
-
Welcome aboard Stephen!
That concludes this match #9
-
Hi Jessie, I started a conversion on a Crosman 2260 way last year some time and never got around to finishing it. I put a steel breech on it, put in a smaller (Avenger- opened up a little) transfer port, .177 barrel, power adjuster (rva), cheap Daisy peep sights, and a homemade front diopter sight (which I haven't finished yet). I have shot it a few times here for the 10 meter match. I bought a short air tube for it and am planning to turn it into a short tube pcp. It's actually going to be the same as a .177 Disco. with a short air tube, except the valve will be pinned with HD screws so I'll tune it for 2,400/2,500 psi fill and play with the RVA so it's shooting just under 20FPE. I built a Disco version like this a few years back with a Lothar Walter barrel (via Avenger) and put a Boyds stock on it. It's a little on the heavy side with the Boyds varmint stock compared to the Crosman stock. Maybe I'll get around to finishing it sometime this year. I plan to do something with the stock because I'm not crazy about the "guppy" look. Thinking about shaving the "belly" down a little so it doesn't look so pregnant. lol.
Very nice Mike, I like this platform it just keeps running. I normally keep my Disco on rat duty as my bait station is at 75 ft. and it works good for that.