Sure beats the repeated button pushes it would take to crack the codes
Page 7 of Doug's instructions shows that. I think the maximum is 10 seconds....
I do have the tripod model but I thought the instructions were the same. To change the display time is tricky. Max is 10 seconds. You need to push the function key after you turn on the unit right after the count up and 999.9 shows on the display but before the -SU. Timing is critical as if you wait too long and the -SU shows before you push the button, you will end up in the weight setting setup. If this happens, you must shutdown the unit and then turn it back on to start the count again and get to the 999.9. It took me a while to figure this out but I finally figured it out and have been able to change the display time both faster and slower than the default. Unfortunately, on it is shutdown it goes back to the default of 5 sec. It does save the data up to 40 records so you can go back and look at the numbers after you have shot as long as you don't shut it off.
I will gladly mail my Chinese Manual to you if you want it.
How do I disable the automatic shut-off?I think my clamp-on model is 3.25 minutes to shut-down, which is too fast for me.I will gladly mail my Chinese Manual to you if you want it.