Short muzzle break with dovetails?https://www.pyramydair.com/product/air-venturi-muzzlebrake-with-grooves?a=5875They don't mention dt width? 3/8 or 11mm? Will need to be bored/drilled for the Weihrauch if it's a 16mm barrel.
I found this post, not cheap...https://www.gatewaytoairguns.org/GTA/index.php?topic=197533.0
I think I'll at least temporarily abandon my plan to add the TS1 diopter sight to one of my Weihrauch rifles. I have a high front sight for my Diana 34 Classic, which currently has a scope mounted. I'll try putting the high front sight and AirForce TS1 diopter sight on the Diana and see if it works out. I have my fingers crossed...
I’ve never had issue using the TS1 on any of my weihrauch’s. At least within my envelope of use. Which is …..-20-25 yards(ish). I may have pushed one out to 50 at some point. Don’t remember-I use the front aperture inserts(usually the blacked out one). I have used a post with it on an HW30s in the past however. -I have adjusted the main height adjuster all the way down. (Not the elevation adjustment, the big bolt that allows the entire sight to move up and down)-My elevation adjustment is cranked pretty low but not bottomed out. I’ve got this setup on HW30s (.177 and .22)HW95 (.22)HW77 (.22, .177)I also have a 35e with an, I believe, Centra rear sight that works. I may be wrong on the brand but it’s one of the more inexpensive target rifle compact rear aperture sights. Again for my shooting envelope they work fine but keep in mind I am just a hobbiest and my skills are certainly nothing to write about so my poor skills might be playing a factor as well. Take care, shoot safeChris
Great news. I’m glad you got it working.