Quote from: rsterne on January 16, 2023, 12:41:12 PMNow that I have seen a full side view of the mounting system (Reply # 21) I am very unimpressed about the rigidity of it.... Is it possible to place a scope ring at the back, between the rubber eyecup and the "tower"?.... Even a 3D printed one, of the correct height to hold it parallel to the barrel, would be a huge improvement!.... The way it is, even a gentle knock will cause the POA to change, and a harder smack will likely break something.... Bob I was digging through my mount collection and did find an adjustable mount that was extra with an Immersive scope, that I will make an adapter for.
Now that I have seen a full side view of the mounting system (Reply # 21) I am very unimpressed about the rigidity of it.... Is it possible to place a scope ring at the back, between the rubber eyecup and the "tower"?.... Even a 3D printed one, of the correct height to hold it parallel to the barrel, would be a huge improvement!.... The way it is, even a gentle knock will cause the POA to change, and a harder smack will likely break something.... Bob
IR flash light. I bought a 1508 UniqueFire T75 850nm IR Illuminator Flashligh. It throws the light hundreds of yards, but the field of view is very narrow, and the lens is big and heavy. I then bought a 1508 T38 940 nm. This is much better for airguns. The T38 lens is lighter, and has a wider field of view. 940 nanometers wavelength will not shine as far as 850nm, but it's good for airguns. Some nocturnal animals can see 850nm, but not 940nm.The only problem is that this light dosen't have any visible indication that the light is on or off. The on/off switch is push button. I remove the battery when I put it away. I need to get the IR camera to see if it's on or off. The new model 1605 has a dim red light on the back, and it has a variable dimming knob. The new model dosen't come with battery or charger, but it may have a mount and remote switch. ( I didn't see the new model when I purchased a few months back. )HTHNew model:Here is the smaller T-38 lens with 940nm led pill.Hunter
Looks to be a solid piece of kit there
I'll bet that Henbaker would work well on a AirForce platform. It let's you view high up with the objective lens low.Do you know the objective center height above the barrel center?Hunter
It looks massive on the Stormrider! Is there any way to mount it straight to the dovetail rail without the cantilever mount?
nope unless we 3d model a mount adapter
James, has that unit been effective for you? My flashlight, green, red or clear scares the bunnies. So far only one bean plant eaten, but no kills.Do you have thread on your Prod build? I may be interested in adding a bottle to one of mine. I’m adding a longer tube to on of them.
It also looks like they improved the focus wheel area also. https://www.aliexpress.us/item/3256805207335805.html?gatewayAdapt=glo2usa4itemAdapt Also they made the mount to easily work as the way I mounted mine They spy on me LOL