GTA
All Springer/NP/PCP Air Gun Discussion General => Bargain Gate => Topic started by: mikeyb on March 04, 2023, 06:43:03 PM
-
Hatsan Edge Spring Combo (w/scope & rings) 25 caliber.
$105.44 Amazon (6 in stock?)
https://www.amazon.com/dp/B00CSAAT2O (https://www.amazon.com/dp/B00CSAAT2O)
Price changes quickly.
I already have an Edge (and a Striker) in this caliber. Not a magnum but a relatively easy to cock/shoot entry level coil spring powered break barrel. Throws the 24.7 grain Strikes around 560fps. Mine stacks pellets at 30' using just the open sights.
The Edge was not bad right out of the box. Much improved "feel" after a longer snug spring guide replaced the factory guide. Trigger is a very pleasant and smooth 2.5 lbs (on both) after using a slightly longer adjustment screw, a lighter blade spring, and a blade straightening jig. Don't buy it if you can't (or don't want to) make the fine tuning tweaks. Quality control varies at this price point so expecting perfection right out of the box may will lead to disappointment.
-
Amazon price-bot just dropped it to $87.73. Tempting!
edit : not even an hour later and price rising again...
-
Hatsan Edge Spring Combo (w/scope & rings) 25 caliber.
$105.44 Amazon (6 in stock?)
https://www.amazon.com/dp/B00CSAAT2O (https://www.amazon.com/dp/B00CSAAT2O)
Price changes quickly.
I already have an Edge (and a Striker) in this caliber. Not a magnum but a relatively easy to cock/shoot entry level coil spring powered break barrel. Throws the 24.7 grain Strikes around 560fps. Mine stacks pellets at 30' using just the open sights.
The Edge was not bad right out of the box. Much improved "feel" after a longer snug spring guide replaced the factory guide. Trigger is a very pleasant and smooth 2.5 lbs (on both) after using a slightly longer adjustment screw, a lighter blade spring, and a blade straightening jig. Don't buy it if you can't (or don't want to) make the fine tuning tweaks. Quality control varies at this price point so expecting perfection right out of the box may will lead to disappointment.
Thank's for the heads up mikeyb. Good deal on the Edge
On my Edge and Striker, I replace to M3x5 factory screw with a M3 x 8 button head hex cap screw. Screwed all the way in, it is a perfect fit.
Best Wishes - Tom