Sorry Viper, didn't mean to ignore your question, but yours looks just like mine, if that's what you're asking.
Please look particularly at the breech chamber pic and let me know if your chamfer lead in looks scalloped like mine, thanks
Quote from: Viper1357 on June 07, 2018, 02:32:26 AM Please look particularly at the breech chamber pic and let me know if your chamfer lead in looks scalloped like mine, thanksAt first I thought you had micro groove rifling... that has to be the worst chatter I've ever seen.
I'll just have to wait and see when I receive my replacement. I'm wondering if maybe the .25 cal is more problematic? Anyway I really want it to work but at the same time don't want to have to struggle with a follow up shot at 3:30 am when I'm dealing with the trash panda. Pelletina,Holy holy holy- Pelletina! Man, you have got a lot of guns!! You are really addicted to these PCP!! And I thought that the average Joe on here with 3 PCP’s had a bad case of the dark side addiction, but you have been to rehab many times over!!!Sorry to derail your tread, OP, just couldn’t help myself.Hatsan BT Carnivore .30 calHatsan BT65 QE ,25 calHatsan Bullboss .25 calHatsan AT44-10s QE Long .25 calHatsan AT44-10S QE .25 calBenjamin Marauder .25 calHatsan Galatian .177 cal with Wolf LDCMrodair Varmint .22 cal with Wolf LDCDiana Stormrider .22 calGamo Urban .22 calHatsan AT P2 .22 cal with Wolf LDCHatsan 135 Vortex QE .30 calHatsan 125 Vortex .25 calHatsan 95 Vortex QE .22 calBenjamin Trail NP2 .22 cal Ruger Blackhawk Elite .177 cal (POS)Hatsan Mod 25 .22 calCrosman 2240 .22 calBeeman P17 .177 calYong Heng 110v compressor
Quote from: Wildcatter on June 06, 2018, 04:24:27 PMI think people aren't pushing the magazine far enough in and are trying to guess roughly where the magazine is SPOSED to sit. When the magazine is seated correctly, a small portion overhangs the left side of the breech. I found myself cutting the fronts of polymags when I tried to wiggle the magazine in so the probe would enter the little round pellet cut out. I started pushing the magazine all the way in until the magazine cut out and the breech load area were flush and no futher problems. With either of the two supplied magazines. Now if someone could tell me which Hatsan has the metal magazines that are the spitting image of these...I'm having a similar issue with my Flash QE .22 and I can assure you my hands and fingers are strong enough to crush those little junky mags, and I am pushing the mag in as far as it can go, and still having the issue with most but not all pellets, and shapes. I also thought I wasn't pushing it in far enough at first, but after many more attempts, and measuring what should hang over, and making sure the mag cutout bottomed out on the barrel chamber breech danged if it isn't still happening. One caveat is, with copper plated or lead free pellets, I feel the friction, but they still load. Please look particularly at the breech chamber pic and let me know if your chamfer lead in looks scalloped like mine, thanks
I think people aren't pushing the magazine far enough in and are trying to guess roughly where the magazine is SPOSED to sit. When the magazine is seated correctly, a small portion overhangs the left side of the breech. I found myself cutting the fronts of polymags when I tried to wiggle the magazine in so the probe would enter the little round pellet cut out. I started pushing the magazine all the way in until the magazine cut out and the breech load area were flush and no futher problems. With either of the two supplied magazines. Now if someone could tell me which Hatsan has the metal magazines that are the spitting image of these...