Cross action tweezers. This topic came up a few weeks ago. I looked up "tweezers cross action" on ebay. I got a curved and straight and now a lot easier to load under scopes.Here is the link to that thread.https://www.gatewaytoairguns.org/GTA/index.php?topic=182883.msg156085245#msg156085245[/quote+1 on the cross action tweezers! They work very well. Blocking off the bb port/area can be beneficial on some guns to keep pellets from dropping into where they are not supposed to go too.
Thanks folks, I need to rely more on the search option. Yes, I see that the cross action tweezers are available on eBay and Amazon. Until I get some, I'll struggle with my clumsy fingers or maybe, very gently, try needle nose pliers
If you close the bolt just enough to block the bb passageway and point the muzzle down, you can then roll a pellet into place. It works pretty well for me. I will add that while I was still working on a loading technique, I had several pellets go in backwards. After getting frustrated I just started shooting them even if they were backwards. They shot just fine and were just as accurate as far as I could tell.
I will add that while I was still working on a loading technique, I had several pellets go in backwards. After getting frustrated I just started shooting them even if they were backwards. They shot just fine and were just as accurate as far as I could tell.