Did not know the Cuda standard was NOW coming with a threaded shroud end cap The first standards we tested Did Not. Max does, standard did not.
Standard does not come with a 1/2-20
just a FYI…its been my experience some 3-d moderators cant take the pressure of the PCP…..good luck
My .25 standard appears to have a threaded end cap on it but I can't turn it off by hand. I was thinking off wrapping a towel around it and then carefully use a pliers but after reading these posts maybe I better leave well enough alone.
Quote from: tennx on November 15, 2022, 10:10:46 PMjust a FYI…its been my experience some 3-d moderators cant take the pressure of the PCP…..good luckThe buckrail I have on my.22 liberty that's tuned to 52 fpe works just fine.
I reside in " CA " and purposely chose a " Plastic / Polymer " Moderator. Any/All " LEO's " should be able to determine / conclude. That my " Air Rifle Rated - Plastic / Polymer Moderator ", is not made of a " Metal Alloy ", which could be used in a Firearm..
Quote from: PERRO on November 15, 2022, 11:26:59 PMI reside in " CA " and purposely chose a " Plastic / Polymer " Moderator. Any/All " LEO's " should be able to determine / conclude. That my " Air Rifle Rated - Plastic / Polymer Moderator ", is not made of a " Metal Alloy ", which could be used in a Firearm.. You would be surprised how ignorant most offers are when it comes to gun laws in this state. If it looks like a suppressor it won't matter to them what material it is made of. Don't worry about using a metal LDC. I have had a few run-ins with them where they were sure my rifles were illegal and both times it took a supervisor to clear things up.