The trick with that scope stop is actually to leave it right where it is, in the front 2 holes like in the picture I posted, with the front ring against it.It will work as intended and making a new longer one isn't necessary.For the back ring, you can use either a standard ring or an offset like I did. Either will work since there's plenty of dovetail space back there. Part of why I chose offsets was to keep the rings AWAY from the turrets.Then again, I've only owned 23 of them at one time or another and done it that same way on every one of them but what would I know I guess....
Part ofwhy I chose offsets was to keep the rings AWAY from the turrets.
now back mount started to move a bit, what should i do, should i put back that tape and put some blue loctite on screws that go for rail