GTA
Fun Shoot By State Discussion Gate => Discussions By States => Georgia Fun Shooting Events => Topic started by: GD Giles on October 19, 2016, 12:41:45 AM
-
Are we up for a Sunday Lithonia shoot sometime? When is the Falcons bye week Norman? ;)
-
Yeah Lithonia Land fill (Norman's Corner) is due for a shooting meet. I got some different guns to try out this time. I am trying to build a long range .257 with my Air Force Escape. Hopefully it would be done.
-
Well, when you want to sell it Trinh, let me know I'll probably buy it if you convert to .257 with Doug's valve.
Yeah Lithonia Land fill (Norman's Corner) is due for a shooting meet. I got some different guns to try out this time. I am trying to build a long range .257 with my Air Force Escape. Hopefully it would be done.
-
Tony,
So I ordered these two items (valve and adapter) for my AF Escape. I have an extra 500cc bottle and it has a 18x1.5 threads. Needed an valve to fit the bottle because one that came with the Escape might be too small (since the bottle on the escape is a lot smaller). The valve comes in several sizes , I opted for 5.5mm. I am going to try to polish up the valve stem and possibly enlarge it if I can't get enough FPS. I am not sure what size is Doug's valve. I also ordered the offset adapter with the 18x1.5 thread. Once I get that installed, I will order the new unchoke barrel and check with you which slugs you are having luck with.
(http://i123.photobucket.com/albums/o292/purpleGORILLA/Airforce-Condor-Airforce-Talons-Air-Tank-PCP-Adapter-with-Pressure-Gauge.jpg_640x640_zpsx0y58pqa.jpg)
(http://i123.photobucket.com/albums/o292/purpleGORILLA/Airforce-condor-talon-ss-pcp-High-pressure-cylinder-valve.jpg_640x640_zpsk9gbtzfa.jpg)
-
Doug's top hat for his 25 valve is .260 inside diameter. You're going to want straight or slight angled because the amount of air you need to fire a .257 slug. What you have there is going to get you maybe 750 to 800 fps of you're lucky. It's restricting air flow badly from what I've read about the offset adapter. It's the reason I didn't put a talon tunes adapter on mine. You can order a valve and hammer from R&L Airguns if you can't get one from Doug. It just won't shoot as fast as his.
-
This morning I discovered the Optima scope on my Gladius won't focus down close enough for some shots I might be able to take in the yard. It starts at 30 yards and that's the outer limit of my yard. I could have shots as close as 10 yards. I'm thinking about taking that scope and my hand pump and putting them up for trade for a tank.
-
Hey, still looking for a date I think. It would be cool to do it before the time change so there's an extra hour of daylight, but if not, that's ok too.
Hey Jesse and Trinh, don't know if you've caught this in another neighborhood or not. Just thought you might want to know if you hadn't seen it. http://www.airgunnation.com/topic/furious-is-an-understatement/ (http://www.airgunnation.com/topic/furious-is-an-understatement/)
-
They just cleaned up there a couple of weeks ago and a week later someone dumped some tires and burned them in the center of where we park, and a couple days later they dumped more trash. It's not taking up the entire parking area but it's a lot of trash. I will check it everyday this week to see if there is another clean-up.
-
Hey, still looking for a date I think. It would be cool to do it before the time change so there's an extra hour of daylight, but if not, that's ok too.
Hey Jesse and Trinh, don't know if you've caught this in another neighborhood or not. Just thought you might want to know if you hadn't seen it. http://www.airgunnation.com/topic/furious-is-an-understatement/ (http://www.airgunnation.com/topic/furious-is-an-understatement/)
I saw the header this morning but didn't have time to read. That's pretty scary. I hope all the problems will be addressed once mine comes in. As for shooting date. Any day is fine with me.
-
I think that issue with the probe screw on the Impacts is only an issue for the .30 cals. The loads are a lot less on the .25, .22. They claim to be doling out some free upgraded set screws for them I think. I still think those are pretty darn neat guns.
-
I was super impressed with Jesse's .22. I'd still love a Wildcat.
-
AoA answered in the post that they have sent stronger screws out for replacements. They were aware of the problem and had already sent out the screws before this incident. It would have been nice if they had notified all the owners before someone could have been hurt.
-
I checked the landfill and there's still a lot of trash there.
-
I am going to jesse shooting spot tomorrow come up if you can.Troy
-
Norman, I would come help you clean up some, if I didn't have my house torn apart right now. I just stopped for a break from the drywall dust for a minute.
-
There's enough room for parking 3-4 vehicles. But not enough room for a larger gathering. I plan to go out there for a couple of hours tomorrow to play with my scope cam.
-
Post a video when you do, so we can see it in action!
-
yeah, love to see that!
-
There's enough room for parking 3-4 vehicles. But not enough room for a larger gathering. I plan to go out there for a couple of hours tomorrow to play with my scope cam.
We can all help. There is no need for you to do it by yourself. Maybe one of us can make a big warning sign with several guns as background? On a side note, I finally got my Vulcan zeroed in with a new scope. Took down 3 tree rats and wounded one around the house within 15 minutes yesterday. They are multiplying like there is no tomorrow.
-
Trinh from what I've gathered they normally dump trash late at night and is in and out in 5-10 minutes. I doubt they would heed a sign :o
-
I wonder if a surveillance sign, and a fake video camera would do the trick?
-
YES!!!!!! Just got the call. My triple black .30 Impact just went out vis UPS, should be here in couple of days. Sold my Cricket last week so everything worked out. I think Falcons have a bye week soon. ;D SO LETS THE SHOOTING PARTY begin.
-
Haha! You may want to check out that probe situation, or if they put the "new improved" set screw in there. You can get the improved screw free. I'm assuming you saw that thread on that? It should be a sweet gun though!
-
Well, wish y'all guys where alot closer to North GA. Had fun out at Jesse's Sunday for a couple of hours. Managed to take out another spinner at 150. Troy brought some cool guns to shoot. Maybe I can manage to swing out to the land fill Norm is talking about. I'm also getting a couple of guns painted this week. I'll post pics when they're done. A friend is painting them with gun kote bake on paint. One .257 is going to be the 2400 series foliage green and the other .257 I'm painting 2500 series metallic burnt bronze.
-
Haha! You may want to check out that probe situation, or if they put the "new improved" set screw in there. You can get the improved screw free. I'm assuming you saw that thread on that? It should be a sweet gun though!
I saw it. Mine is coming from Precision so not sure if they are aware of it. I know AoA does. Anyways, it looks like I will have to scan through alot of postings on AGN to figure out what all the quick fixes are.
-
Well, wish y'all guys where alot closer to North GA. Had fun out at Jesse's Sunday for a couple of hours. Managed to take out another spinner at 150. Troy brought some cool guns to shoot. Maybe I can manage to swing out to the land fill Norm is talking about. I'm also getting a couple of guns painted this week. I'll post pics when they're done. A friend is painting them with gun kote bake on paint. One .257 is going to be the 2400 series foliage green and the other .257 I'm painting 2500 series metallic burnt bronze.
Are both barrels on your AF .257 24 inches? I am still waiting for the parts I order, it is coming from accross the ocean :-\. Have you figured out what bullets you are happy with?
-
Well, wish y'all guys where alot closer to North GA. Had fun out at Jesse's Sunday for a couple of hours. Managed to take out another spinner at 150. Troy brought some cool guns to shoot. Maybe I can manage to swing out to the land fill Norm is talking about. I'm also getting a couple of guns painted this week. I'll post pics when they're done. A friend is painting them with gun kote bake on paint. One .257 is going to be the 2400 series foliage green and the other .257 I'm painting 2500 series metallic burnt bronze.
Are both barrels on your AF .257 24 inches? I am still waiting for the parts I order, it is coming from accross the ocean :-\. Have you figured out what bullets you are happy with?
No, one is 27-5/8" and the other one is 32". You really don't see any speed till you step up to the longer barrel as you're dumping alot of air and need the extra lenght to build up the power. So far I'm still chasing bullets. The 60 gr Noe's I have gotten from Knifemaker on here are doing pretty dang good. My 27" barreled gun slings them out at 1020 fps. Now the rifle I just bought with the 32" barrel and Doug's tank setup slings them out at 1070 fps with the power wheel on zero. That's almost to fast already to turn them up any more. Knife said they like around they speed but would loose accuracy once you reached 1100 fps. I hit Jesse's 150 yard 4" spinner 3 consecutive shots and the 3rd one knocked the spinner off. It's pretty dang accurate. I'm still playing with the 80 hr Ranchdog hp and the 82 gr spritzers. It's pushing those at 1020 fps range with the power wheel on 4. You'll need to slug your barrel to know what size bullets to order. One barrel slugged .2575 and the other one was .2578. so I ordered bullets .2578 from Knifemaker.
-
Ok. We need to set a date for this next Lithonia shoot. Probably January now? Different topic-what would you do? I have $230 in Pyramid Air credit. My top 3 needs are:
1. Air tank fill system
2. New scope for Gladius (or take the one off my 95 and replace that)
3. Shooting rest like the Field Pod or a long bi pod.
So, my credit won't get me a fill system. Their cheapest one is $300 and it's a Pony tank that holds 4500 psi but is regulated to 2900 psi output, which would be fine for my Gladius. But I'll only get about 14 gun fills per tank fill. Probably a great choice for field use/hunting. I don't know. I don't fill my gun 14 times in a day when I'm shooting you guys. That first attempt at the hammer spring adjustment I might have filled it 10 times maybe. I went through almost 300 pellets but that's far from a 'normal' shooting situation. Maybe I should consider that tank.
Most of my shooting is 30 yards or under w/the Gladius. So I think I'd be better served w/a scope that covers that ground well and can go out to 50 or whatever when I want to. So I'm looking at the UTG Bugbuster which can go as close as an incredible 3 yards! Sometimes I do have pests that close.
I want the same Caldwell Field Pod Norman has but the only one PA sells is the one for sitting down, which is fine w/me. But, they sell it for about $30 more than just about anybody else on line. They also sell one aluminum bi pod that can be used for seating or standing for under $40. Don't know if that would make me happy or not. I never tried Donny's at the last shoot. I should probably do that.
I was hoping I'd be getting PA gift cards that I might have been able to trade w/one of you for a used tank set up but it's not gift cards. So I'm making some kind of PA purchase. And due to how my credit works I can't qualify for any discounts/coupon codes. :( Whatever I get I'm paying full price for it.
-
Do you get the 4 for 3 pellet deal? How about you get a bunch of pellets and I will give you a 30 minute tank with fill assembly and the Centerpoint scope I offered to give you before? That will knock off two things from your list ;D
-
Let me check on that.
-
What's the life left in the tank?
-
What's the life left in the tank?
MFD is July 2007 so good until July 2022. Last hydroed Dec 2012 so it's good until Dec 2017 on that end.
-
Man I didn't know all this time Norman is a Santa undercover.
-
I think the company I work for turned my PA points into general points meaning they're now going to groceries, Christmas etc. I'm checking on it.
-
Oh no, not regular points. They took your fun points and turned them into responsible adult points. There goes the "I have to use them at PA" excuse :( FWIW, I found shooting with that trigger stick and a chair pretty nice. I can shoot with that set up all day. Norman is good about having stuff other people need, haha! I hope we can shoot soon, so I can check out Norman's .25 Cricket and Trinhs new toys too.
-
The crazy thing is if you look at the factory video they use modern CNC equipment for manufacturing their guns. It seem like there should be few "rough" metal parts and other QC issues.
-
Ok. I've still got the credit. I didn't know I got bonus points at certain intervals. You want that 3 for 4 deal, right? ;) From what I'm told I can do 4 for 3 so PM me your pellet order and what the price should be. If you could get the item # etc that helps too. I'm not sure what happens if stuff is backordered or out of stock. They ask me to put down a 2nd choice. So keep that in mind. Hit me up.
-
I sent you an IM. If your points don't cover shipping let me know and i will reimburse you for any shipping costs.
-
Ok.
-
So when is the NEXT SHOOT????????Better hurry before it freezes!!!!! Cant' this Sunday before it will rain and besides the FALCONS are playing the Chiefs.
-
I drove out there today to see if the trash was removed. Well, it's even worse now. Look like someone dumped an entire demolished home there. There is no place for even one car. It's the worst i've ever seen there. :'( :'( :'( :'(
-
I just can't comprehend how they have time to do that. I was just there for like 15 min and a lady cop stopped by to check on me.
-
Man, what is wrong with people! I already don't like people in general, but whoever keeps dumping stuff deserves a special kind of dislike >:( Lazy turds.
On a side note, how did turds make it past the word police? LOL!
-
I just can't comprehend how they have time to do that. I was just there for like 15 min and a lady cop stopped by to check on me.
According to officer Friendly they do it late at night.
-
Looks like Jesse may be checking out for a while, say his post that he is moving out of state and selling his newest toy. Good luck Jesse, we will miss you...
-
Well good news. They cleaned up the big mess. Someone already dumped a few trash bags of garbage again but it can easily be moved.
-
Looks like Jesse may be checking out for a while, say his post that he is moving out of state and selling his newest toy. Good luck Jesse, we will miss you...
Didn't see that. Where?
-
Looks like Jesse may be checking out for a while, say his post that he is moving out of state and selling his newest toy. Good luck Jesse, we will miss you...
Didn't see that. Where?
Classifieds here and on AGN.
-
Thanks. Just saw it.
Dropped him a note.
Guess that means we won't be getting together at his place anymore, huh?
-
How is Dec. 18th sounds to you guys. I hope it won't be too cold or rainy? Its a shame that Jesse is leaving. I hope he will be back one day.
-
Wish I could make it. I have prior plans... I'd happily skip out on them, but doctors orders and all that... :-\
-
If weather is good I can make it.
-
Shoot me an address and I'll see if I can come shoot alittle with y'all on the 18th. I'm trying to scratch the cash up to get Jesse's impact. That's alot to come up with right before Christmas.
-
I think I'll be able to go on the 18th, weather permitting of course. I would like to see if I could try some 100 yard groups one of these days. I know I can hit stuff at 100, but groups is a different ball game. I may have to break out the Barracuda Match for that one,lol!
-
Shoot me an address and I'll see if I can come shoot alittle with y'all on the 18th. I'm trying to scratch the cash up to get Jesse's impact. That's alot to come up with right before Christmas.
Scales Landfill
7200 Scales Road
30058 Lithonia
GA
-
Shoot me an address and I'll see if I can come shoot alittle with y'all on the 18th. I'm trying to scratch the cash up to get Jesse's impact. That's alot to come up with right before Christmas.
I tried to msg him to see if he wants to split it up (barrel and scope) so that may lower his selling price. He hasn't replied.
-
Donny, how do you like the regulator in the Hatsan? Do you notice increased in shot counts? I am contemplating of getting one for my Brocock. Can't figure which one (rober lane, Huma, or Altaros).
Do any of you guys FACEBOOK? I would like to connect so it would make messaging a lot easier .
-
Hi y'all, sorry I haven't ben on here in a while but I have ben studying for my FAA part 107 test. Im taking a job ware I will be traveling constantly but I'm not moving or selling the field we will still have shoots up there but we won't be able to have one ever month, or at least not at first.
-
So... drone license? Actually kinda cool. 8)
Good luck on the test! When's it happen?
Glad we'll still be able to get together at your field. We've certainly enjoyed your hospitality and the camaraderie.
-
So... drone license? Actually kinda cool. 8)
Good luck on the test! When's it happen?
Glad we'll still be able to get together at your field. We've certainly enjoyed your hospitality and the camaraderie.
Yep Drone license, My new job will be inspecting cellphone towers with drones. I will start mid January, I hope.
-
Donny, how do you like the regulator in the Hatsan? Do you notice increased in shot counts? I am contemplating of getting one for my Brocock. Can't figure which one (rober lane, Huma, or Altaros).
Do any of you guys FACEBOOK? I would like to connect so it would make messaging a lot easier .
I consider a regulator a must have if you do much longer range shooting, and I know Norman really likes his. Of the ones you mentioned, I do prefer the Huma, since it has exact markings for the settings. I also like the Audrius regulator Norman has in his Galatian. It seems very well built too. That Brocock has a smallish air cylinder, so the reg will take up some of that. I think folks have been getting good results without one. I know the reg has increased the shot count of every gun I've messed with. Have you run any strings with the Brocock yet??
I'm on facebook. My name on there is D Avery Sellars, so look me up!
Hi y'all, sorry I haven't ben on here in a while but I have ben studying for my FAA part 107 test. Im taking a job ware I will be traveling constantly but I'm not moving or selling the field we will still have shoots up there but we won't be able to have one ever month, or at least not at first.
Good to know man. Good luck with the test!
-
So... drone license? Actually kinda cool. 8)
Good luck on the test! When's it happen?
Glad we'll still be able to get together at your field. We've certainly enjoyed your hospitality and the camaraderie.
Yep Drone license, My new job will be inspecting cellphone towers with drones. I will start mid January, I hope.
I think you might need to pack a PCP just in case a rogue crow tries to take out your drone!! ;)
Happy to hear from you, glad things seem to be going ok. Be safe and wise on the road.
-
I should be good for the 18th, I think. Are we looking at around 1pm?
-
Good Luck with the new job Jesse. A few moons ago I did a study for AT&T about using helicoptors to do the same thing and the ROI was there but the Union basically said not a snowballs chance any of their employees was getting in a helicoptor... killed the project, and maybe opened the door for what you are going to do. :D
-
Yes Jesse hope all works out for the best. OAN A new guy name Joseph from the FB group might be able to make it out.
-
Jesse you can borrow my DJI to practice for your licensing. ;) :D. Here is a picture I took after the snow storm.
(http://i123.photobucket.com/albums/o292/purpleGORILLA/IMG_0763_zpsvfpjrnwr.jpg)
-
Looks like it might rain this weekend. >:(
-
Well in Columbus for Sunday the good news is that it's supposed to 68 degrees. The bad news is there's a 60% chance of rain.
-
There is still plenty of time for that forecast to change too though :) Let's see what it says on Friday...
-
There is still plenty of time for that forecast to change too though :) Let's see what it says on Friday...
Yep, it changed alright. It changed from 60% to 80%. LOL.
-
Well I can at least console myself that no one else will be going either... ;D
-
Let's see how the weather is going to go. If it doesn't look like it'll rain, I'll head out that way. Have to get one of my tanks topped off tomorrow or Saturday at the fire house.
-
Lithonia, Sunday, 100% chance of rain.
-
Dont' know what the weather up there ended up being but down here it would rain a bit, then the sun, then rain, then sun and the whole time the wind was pretty stout. Not as much rain during the day as originally predicted but by evening it had settled in for the next several hours and just quit w/in the last hour this morning. We need it. Can't feel bad about it.
-
Was pretty foul. Rained all weekend. Gave me time to fix the bolt handle on my Varmint. Broke the soft Chinese metal so ended up salvaging some old dental tool.
(http://i1231.photobucket.com/albums/ee518/TinSoldier770/7087F68D-FDE0-4FF8-A31F-37D0BEE187ED.jpg)
-
Welcome to my world of fixing stuff with the wrong tools Trinh,lol! Nice job!
-
Speaking of tools, I got to use a zirconia dental bit and dental drill the other day. I had a dentist that was desperate to get his copier working, so I had to fabricate a part out of a metal screw. That zirconia is pretty cool stuff! It cut that metal like butter.
-
That's what I used to cut too. ;D. Diamond burs will cut porcelain like butter so metal is a breeze. On a side note , I might seriously picking up a 9x20 lathe soon. Been talking to this guy for over 2 months.
-
That's awesome! You can have all kinds of fun with that! We're gonna have send all of parts to you to machine now, haha. The bit I used sorta looked like a little pineapple. It was wasn't diamond grit. It was solid zirconia. Very cool stuff!
-
Hey guys, I just wanted to give a heads up to those of you in the group with the Gladius/Bullboss guns that I or you put the little o-ring in there as a hammer buffer. I encountered an issue with it when trying to shoot at high power settings, and it was causing the hammer to drag/bind a bit with very high pre-load settings :-[ I don't think it will be an issue if you're shooting at normal power levels, but I wanted to give you guys a heads up just in case. I do have a different,longer spring in my gun that is capable of pushing the hammer harder than the the factory spring, and I'm pretty sure that contributed the issue.
I just feel better letting you guys know, so you don't end up chasing your tail like I did if you really start to push your guns for power. The real benefit to that o-ring in there is in the low to medium power settings, so you guys will likely not have any issues from it. My hammer was hitting it so hard that it sort of wedged itself inside the o-ring, which doesn't equal good shot strings. It won't hurt anything if that happens, but... So there ya go, you are now informed ;D
-
I wish the nova is smaller and weights a little less. I would have kept it and let you do your magic.
-
When the Super Nova with the thumbhole stock and reg is released I have to have it. :D
-
I wish the nova is smaller and weights a little less. I would have kept it and let you do your magic.
How much do your RAW weigh? They are pretty heavy aren't they?
-
Trinh, did you receive a P12? I don't think I have seen any posts about it yet?
-
Probably the same but then I don't use that gun to hunt. It is strictly a target gun so I don't mind the weight as the only time I shoot it is with your guys.
I wish the nova is smaller and weights a little less. I would have kept it and let you do your magic.
How much do your RAW weigh? They are pretty heavy aren't they?
-
Steve, unfortunately I cancelled it. After realizing how inconvenient it would be for my son to load the pellets , I decided to find a repeater. Ended up buying a brocock and a varmint for the same price as the p12.
Trinh, did you receive a P12? I don't think I have seen any posts about it yet?
-
Today was perfect for getting out to shoot. Temperature in the 70s, no wind and very pleasant. I went out to the landfill today for about 4 hours. I'm sure I went through more than 500 pellets and hit some very long shots on cans.
-
I wish I'd been able to shoot today, instead of visiting a bunch of folks in south GA :(
-
Tomorrow is supposed to be just as nice so i will probably go out again at least for a while.
-
Merry Christmas boys! I have a church friend that got an FX Verminator for Christmas so now I have an in town shooting buddy! But, I told him about the fun I have with you guys and he's excited to come up with me the next time we get together, whenever that is.
Norman, he's got a pump and is older and as rotund as me so I guess he'll be happy to tap my tank as well. Looks like I got it just in time! Still haven't found a place to fill it up yet but I've not looked that hard either. It's been hard to get too much done during the holidays.
-
Tomorrow is supposed to be just as nice so i will probably go out again at least for a while.
I just got in from south GA, but I may be able to go shoot tomorrow. I ain't gonna lie, it will depend on how tired I am and how late I sleep :D What time are you planning on going out there?
-
Probably around 2-3. The weather report says there might be intermittent light rain. I still plan to shoot though.
-
Hey guys I wanted to get your opinion. Now that I got the Bullboss punching above it's weight like my AT-44, I'm seriously considering selling the AT. What do peeps think? I know Norman will say keep it,lol! I mean, I basically have two guns that do the same thing, and they are both equally accurate. The AT-44 has a slight power advantage, but not at a level I think I'll ever use it at. I don't even know how much the AT-44 is realistically worth. Sure, I know it is a dang solid shooter, what work has been done to it, and how well it has been taken care of, but that doesn't always transfer to the value of the gun. It is still an AT-44 Long QE after all.
I ain't gonna lie, I'm a little attached to it, but I technically don't have a use for it. I suppose it is good to have it at the ready with it's current 51fpe tune, should I need the extra power for a "situation". I'm a little torn here.
Opinions??
-
I say keep it :D. Seriously, I would set one up as a high shot count small game hunter and the other as a hammer for bigger game. Instead of getting a 25 cal you can substitute one gun and not have to change the cylinder, just grab and go. You have put a lot of work into that gun and to sell it you would lose money because there's only so much you can command for it. It's performing way above its' market value.
-
Depending on what you have in mind of getting next? No reason of keeping something that is the same. Its like a polygamist marrying a twin. :).
-
Depending on what you have in mind of getting next? No reason of keeping something that is the same. Its like a polygamist marrying a twin. :).
That has to be one of the best analogies I've ever heard Trinh,lol! You and Norman both have good points. I think I'm just going to hang onto it for now. I'm not saying it isn't for sale if the right offer or situation were to present itself though. It is nice to be able to pick up a gun with double the power without changing anything. I'm not quite broke enough yet to HAVE to sell it. I was just thinking out loud.
-
Donny, that is the same situation I had with the Bullboss and the P12... Yes the Bullboss was a repeater and the P12 is a single shot, but they both performed about the same and I don't mind single shots... IMHO, this hobby demands trying different guns, and while I have caught myself regretting selling my Condor to Jesse, I am enjoying learning the ins and outs of the BT65 .25 cal I replaced it with... what if you sold both guns and grabbed one of those nice Russian .30 cals...hahaha it never ends!
-
I think you should turn the BT into a slug shooter!
-
Donny, I do have some 30 gn slugs that I know will fit the magazine that I have not tried yet, and the thought has crossed my mind.
Since it has been raining non stop the last few days I did some adjusting on the BT65 with .25 Benji domes and shot this string across my indoor chrony setup:
Starting fill pressure 180 bar
Ending pressure 125 bar
927,929,944,941,942,948,953,944,951,940,941,941,929,932,927
Low 927 (53 ft lbs)
High 953 (56 ft lbs)
Average 940 (54.5 ft lbs)
This seems like a pretty good shot vs power trade-off for a dedicated hunting air rifle.
I will try the slugs tomorrow and see how they do.
-
You guys still out there? Somebody post some dead animals or targets or something in here, Jeez :D The weather has not been nice to us on going shooting lately...
Steve, how's that BT doing?
Norman, did you find out if your AT's had PEEK valve seats or not?
Trinh, hurry up and buy a lathe,lol!
Glen, where's your dead squirrels?
-
Hi when are you guys gona get together to shoot again? I'm down here east of Athens but I dont mind a drive.
-
Hi when are you guys gona get together to shoot again? I'm down here east of Athens but I dont mind a drive.
Our biggest issue of late has been the weather. The fact that the Falcons are in the playoffs isn't going to help right now either. A lot of us have to watch the Falcons games :D Hopefully, we'll get to shoot soon though. I'm needing some trigger time myself!
-
The Falcons play Saturday. Sunday supposed to be warm but now it's a 20% chance of rain. I can keep an open schedule on Sunday in case the weather is nice enough to shoot.
-
I may be able to shoot Sunday? I need to see how the AT-44 is doing at 50+ yards slinging the 25.39s and Ultrashocks... Have you been out to the range lately Norman?
-
I went by to see if it was still free of debris. Last time someone dumped a few tires but not too many to move out of the way. I will check again later this week. Also, to answer your question- yes the AT44 has peek poppet valve seats.
-
I might be available Sunday. My Impact is still at AOA for repair of a slow leak , but I still have my Vulcan and my heavily modified AF escape.
-
Maybe things will work out, and we can kill some evil paper targets? Tony, have you shot with any of us before, or do you know where we shoot? Its in Lithonia.
-
No I've not shot with you guys before. I need some airgun shooting buddies , everyone around here are more into powder burners. I saw the land fill address on one of the post.. if my gps can find it I'm good. Sunday afternoon works for me or Sat.before or after the ballgame (when do they play?) Got the new Gamo Urban yesterday and would really like to see what I got there. always more interesting shooting with friends. I also have a few other toys I'll bring along .
-
Tony, I must say. I was expecting for a first timer, they would either go for the Bejamin Mrod or the Hatsan AT44. However the Gamo seems like a fine gun, especially being made by BSA. Looking forward to seeing the gun in person. For the price, it can't be beat. How many shots have you gotten out for each fill?
-
I could do Saturday...
Hey FreeBird, you're not too far away, maybe we could meet on a Saturday sometime. I've spoken to Nick Panther (Cole) about a meetup one time, and he's over in Statham...
-
Jim, I think you should get into making some high end stocks with that woodworking ability you have!
-
Jim, I think you should get into making some high end stocks with that woodworking ability you have!
I've thought about it. Unfortunately that's as far as I've gotten... I keep thinking a I need to make a stock for my 880 and put some carving or pyro on it... I have the old stock scanned in to my CarveWright software, longer bits and software upgrade purchased, and the jig almost finished... I just lack about 15 minutes work to be able to actually carve one out. I just have had so many other things I chose to do instead. But it's on the "to do" list for sure...
-
Jim I didn't know you were into wood working. Do you do inletting? I want to order a couple of unfinished stocks from Richards Microfit Stocks but they only have the template to inlet QB and Gen1 Marauders.
-
Guys updated weather forecast shows 0% rain and 65 degrees on Sunday.
-
Jim I didn't know you were into wood working. Do you do inletting? I want to order a couple of unfinished stocks from Richards Microfit Stocks but they only have the template to inlet QB and Gen1 Marauders.
Yes I am into woodworking. I work in a cabinet shop as the tech guy... I have never inletted any stocks, but I'm sure I could mess up a couple for you while learning how. ;D
Donny saw my Wood Works show submission on Facebook the other day, and for some reason was impressed...
-
Wow- looking at the picture i can see why. That look great.
-
Jim I didn't know you were into wood working. Do you do inletting? I want to order a couple of unfinished stocks from Richards Microfit Stocks but they only have the template to inlet QB and Gen1 Marauders.
Yes I am into woodworking. I work in a cabinet shop as the tech guy... I have never inletted any stocks, but I'm sure I could mess up a couple for you while learning how. ;D
Donny saw my Wood Works show submission on Facebook the other day, and for some reason was impressed...
Hey if you want to practice on a stock I would certainly risk buying one to let you :D I could even provide a stock for you to copy the inlets from.
-
Norman, if you payed attention to Jim's pellet trap, and portable shooting bench that he says he "threw together", then you would have known that he has some wood working skills up his sleeve. Speaking of, I need to replace the front door on my pellet trap, it is looking rough these days. Hopefully, I can manage to make myself do that before Sunday. I'm going to poke around my carbon fiber scraps, and see if I have enough to cover the front of the trap with. That'll prevent some damage, since the scrap pieces I have laying around are 5 layer thick autoclaved CF :D
You can count me in for Sunday I think!
-
So any barbecue and drinks? Time?
-
Hate to miss it, but I've decided to bug out on Sunday. If anyone is up for Saturday, I'll come. Otherwise....
Norman we should talk about your stock, maybe PM me some pix of the inletting job? Then I can tell you better whether I think I can handle it. Are you wanting artwork on it too?
-
Jim I didn't order it. I checked around to see if I could get it inletted but the stock builders I talked to seemed to have the attitude that just doing an inlet was not worth their time. They offered to build a stock- at a high price but not just inlet.
-
Oh. I thought you had one on hand to copy...
-
I'll try for Sunday. I might bring a friend or two along too. We'll see. Church schedule has changed and I get out later now so I'd be doing good to get up there by 2. It would give me a chance to mount and zero that Center Point Norman gave me. I'll bring the 95 along too Trinh.
-
Oh. I thought you had one on hand to copy...
I do have a stock to copy. I thought you meant the stock that needs to be inletted. No artwork. I was going to get a composite version. I will get you some pix. It's for an AT44
-
As it stands now Sunday works for me. Norman before you go in on the urban for your kid you can check mine out and see what you think. lot of potential there but a couple of issues you guys may be able to help me out on... strange stuff going on with my shot string. I'll bring some crony numbers with me and see what you guys think. The Gamo is the latest addition to my family of "toys" I do have a mrod .25, a prod .22, Sam Yang 909 .45, and some CO2 toys as well. I'm sorta new to GTA but got bit by the airgun bug about 5 years ago and been hooked (addicted ) ever since . As for getting together with some of you guys saturday in statham or somewhere thats workable too. So back to sunday, what do i need to bring besides shooting toys and related "stuff". ?
-
As it stands now Sunday works for me. Norman before you go in on the urban for your kid you can check mine out and see what you think. lot of potential there but a couple of issues you guys may be able to help me out on... strange stuff going on with my shot string. I'll bring some crony numbers with me and see what you guys think. The Gamo is the latest addition to my family of "toys" I do have a mrod .25, a prod .22, Sam Yang 909 .45, and some CO2 toys as well. I'm sorta new to GTA but got bit by the airgun bug about 5 years ago and been hooked (addicted ) ever since . As for getting together with some of you guys saturday in statham or somewhere thats workable too. So back to sunday, what do i need to bring besides shooting toys and related "stuff". ?
Hey Tony I decided to go with an Airmax Varmint. It's a great little shooter but it developed a leak and I haven't fixed it. My collection kind of moves but nothing like Trinh (Tin Soldier), he fall out of love with guns so fast they hardly get a tin of pellets through them. ;) Hope you make it to the shoot.
-
On the Gamo I can already say I want to regulate it but I cant find anything on that or even tearing it down. so new even hard to find stuff on youtube.. It has the potential to be an absolute tack driver, just need to figure out how to tap that potential. Blackdiesel, I'm planning to be there. Looking forward to getting together with folks who know something about my "addiction" without driving all the way to NC or Ak to airgun shows. :)
-
As it stands now Sunday works for me. Norman before you go in on the urban for your kid you can check mine out and see what you think. lot of potential there but a couple of issues you guys may be able to help me out on... strange stuff going on with my shot string. I'll bring some crony numbers with me and see what you guys think. The Gamo is the latest addition to my family of "toys" I do have a mrod .25, a prod .22, Sam Yang 909 .45, and some CO2 toys as well. I'm sorta new to GTA but got bit by the airgun bug about 5 years ago and been hooked (addicted ) ever since . As for getting together with some of you guys saturday in statham or somewhere thats workable too. So back to sunday, what do i need to bring besides shooting toys and related "stuff". ?
The shooting toys and related stuff should cover it I'd think. You may want to bring targets/target holders, but not required. I'm sure some of us will have targets to use either way. You alos might want to bring a chair/shooting rest or table etc., but again it isn't necessary. We always work it out if something is needed. Norman is too good to shoot sitting at a table like us lesser shooters, so he has a very nice standing rest he uses,lol! He does usually bring a table though ;) I'm happy shooting from a chair with a trigger stick myself. We usually just show up and shoot stuff.
I have some more empty 1lb propane cans I can bring to knock around. I'll have a few targets too. Is anyone bringing a chrony, or do I need to bring mine? I got new glasses, so if I shoot bad, I've got my excuse covered.
-
On the Gamo I can already say I want to regulate it but I cant find anything on that or even tearing it down. so new even hard to find stuff on youtube.. It has the potential to be an absolute tack driver, just need to figure out how to tap that potential. Blackdiesel, I'm planning to be there. Looking forward to getting together with folks who know something about my "addiction" without driving all the way to NC or Ak to airgun shows. :)
Great. As far as the Gamo. Try looking for videos manuals, etc for the BSA Buccaneer. Their internals should be almost the same. BTW that was Darrell (Pepegraves) who asked about the Urban recently. I made a post on AGN about it months ago before it was released.
-
As it stands now Sunday works for me. Norman before you go in on the urban for your kid you can check mine out and see what you think. lot of potential there but a couple of issues you guys may be able to help me out on... strange stuff going on with my shot string. I'll bring some crony numbers with me and see what you guys think. The Gamo is the latest addition to my family of "toys" I do have a mrod .25, a prod .22, Sam Yang 909 .45, and some CO2 toys as well. I'm sorta new to GTA but got bit by the airgun bug about 5 years ago and been hooked (addicted ) ever since . As for getting together with some of you guys saturday in statham or somewhere thats workable too. So back to sunday, what do i need to bring besides shooting toys and related "stuff". ?
Norman is too good to shoot sitting at a table like us lesser shooters, so he has a very nice standing rest he uses,lol! He does usually bring a table though ;) I'm happy shooting from a chair with a trigger stick myself. We usually just show up and shoot stuff.
Donnie I got a nice front rest- I'm just too lazy to drag a table outside everytime I shoot.
-
You know I'm just cuttin' up man :D I got in my tins of H&N Sniper Lights and FTT to try out for accuracy. I also got a cheap Atlas knock-off bipod to play with. I actually kinda like it from just playing with it. It seems very well built and very adjustable. Here's the link of the one I got: https://www.amazon.com/gp/product/B01LWATDQG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 (https://www.amazon.com/gp/product/B01LWATDQG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1)
I intend to fix my pellet trap/target holder before Sunday, complete with "shielding" for the front :D I've been itching to get some shooting time in, as you can tell!
-
I have a UTG 360 Recon bipod. It's a well built Atlas clone too. I have to figure out which gun to use it on. I've pretty much replaced all my synth stocks for wood and don't have a rail attachment.
-
Yeah, with the black bipod on my AT, and the black stock/scope, that gun is starting to look like Darth Vader a little bit ;D I'll probably just use the bipod on whichever gun I happen to be shooting, since I only shoot one at a time(if I need a bipod at the time).
-
I will bring my crony. also have a few targets and such
-
My friend Terry will be joining me. He just got his first PCP at Christmas, an FX Verminator. I know you'll enjoy checking that out. We'll be up there by 2:30 for sure. Do we need to bring anything? What time is sun down? I hope we can get in 4 hours of shooting.
-
Trinh, are you bringing your Impact? Does it take the same probe as my friend's Verminator? Right now his probe is on a pump. Not sure if it's on a Foster or not. Are you also bringing your compressor?
Are we grilling out? Do we need to bring anything if so?
-
I'm sure Trinh's Impact is at AoA for repairs.
-
repairs? What happened?
-
It was leaking air when he got it.
-
Glen, I don't think you'll have much time to shoot AND worry about grilling stuff. The light will be pretty low by 5:30 I think. Given what time you guys will be showing up, you'd probably be better served to hit a drive through on the way, so you can have more time shooting stuff :D
I'm just showing up with shooting related stuff, and that's about it for me.
-
So yesterday I called up AoA to get a status on my impact. The tech guy said they can't find a leak when they put their bottle on. :o. I told them ...it leaks with my bottle and the only reason why I didn't send it in was because precision told me not to in order to save weight. #%%$^^@..so this morning I had to send /the bottle on my dime. At this point I just want it repaired.
I will bring the compressor if you guys need it. Billy and his cousin are comin g too. I sold his cousin my Varmint since my son ...actually me ;) enjoy shooting the Brocock more.
-
So yesterday I called up AoA to get a status on my impact. The tech guy said they can't find a leak when they put their bottle on. :o. I told them ...it leaks with my bottle and the only reason why I didn't send it in was because precision told me not to in order to save weight. #%%$^^@..so this morning I had to send /the bottle on my dime. At this point I just want it repaired.
I will bring the compressor if you guys need it. Billy and his cousin are comin g too. I sold his cousin my Varmint since my son ...actually me ;) enjoy shooting the Brocock more.
How's the accuracy on that Brocock?
-
This is around 23 yds with 6 shots.
(http://i123.photobucket.com/albums/o292/purpleGORILLA/IMG_0781_zpsguecea9k.jpg)
-
This is around 23 yds with 6 shots.
(http://i123.photobucket.com/albums/o292/purpleGORILLA/IMG_0781_zpsguecea9k.jpg)
Pretty nice! I would like to see the result of letting it stretch its legs out to 50 yds.
-
I'm betting it won't be much bigger if Trinh does his part. Those Brococks seem to be pretty darned accurate from what I've seen.
-
Looking forward to shooting some new guns you guys have! Terry can't make it now so it's just me coming up.
-
I just cleaned the barrels on the Bullboss and the AT-44, and re-zeroed the scopes. The H&N FTTs are not a go for the Bullboss. It hates them probably more than any pellet I have, they were shooting Rabbit Magnum groups,lol! I wish they would offer them in head sizes smaller than 5.53. What's up with that anyway? The sniper lights seemed to do okay though.
The barrel on the AT-44 was NASTY. I guess it has been longer than I thought since I cleaned it. The good news is that it seems to be doing just fine with the Jumbo Monsters cooking along in the 960fps range :) I didn't try the Ultrashocks, since I needed to put stuff away in time for the Falcons game. Hopefully, I'll get my trap/target fixed tonight after the game. If the weather stays like it is today, it will be awesome. I may even try and print out some NUAH targets tonight ;)
-
So I went to swap out scopes on the Gladius and the Center Pointe has dovetails rings and I Ned Weaver/picatinny. The rings on the gun now are 30mm and I need 1". Any of you have some 1" weaver/picatinny I can trade or buy from you tomorrow?
-
Posting from my phone su cks.
-
Both 11mm and weaver fits Hatsan guns.
-
I know that's the rail for the 125 and some others, but the Gladius won't take 11mm.
-
I have some I think. I will look for them Glen.
-
so you need weaver rings for 1" scope right? I'm sure I have some too.
-
Thanks guys!
-
I got the pellet trap fixed, complete with a CF front "shield" just now. It came at a cost though. I hurt my back a couple of weeks ago, and then I re-aggravated it Friday moving a copier. Then all that time I spent today leaning and working on stuff has made it pretty bad. I'm in some pretty bad pain right now, but I'm WILL be there tomorrow to shoot. I just MAY have to get you guys to help me get stuff out of the car or set my pellet trap out there :( This is $#%^$#% crappy, but I will be shooting tomorrow dang it!
-
I'll do whatever I can to help. Is it a muscle thing or a nerve thing?
-
My brother in law is a Chiropractor if you need some adjustment. Or is that just old age?
I got the pellet trap fixed, complete with a CF front "shield" just now. It came at a cost though. I hurt my back a couple of weeks ago, and then I re-aggravated it Friday moving a copier. Then all that time I spent today leaning and working on stuff has made it pretty bad. I'm in some pretty bad pain right now, but I'm WILL be there tomorrow to shoot. I just MAY have to get you guys to help me get stuff out of the car or set my pellet trap out there :( This is $#%^$#% crappy, but I will be shooting tomorrow dang it!
-
See you guys at 1pm. Gonna bring drinks just so anyone is thirsty.
-
I'll do whatever I can to help. Is it a muscle thing or a nerve thing?
I think it is a combination of things. One thing hurting will make other stuff hurt when you start trying to compensate for it. I just know is it a PITA thing,lol. I'm up and going just the same. I just finished getting stuff in the car(slowly), so I'll see you guys soon.
-
Finally home. Great time today! Always a fun and educational day with you guys.
-
Yep, it was a much needed shoot for me. It was good to meet all the new folks I haven't met before, and the weather was awesome! I've determined that the Bullboss doesn't like a clean barrel on the long range stuff. It finally started getting on target after about 150 rounds. Maybe I just need to convince Hatsan to let me purchase a LW barrel and be done with it :D I was able to track down a standard 19" barrel, but not the 23"...
Glen, we need to see some dead squirrel pictures soon now. You have a scope and its hitting the target. No more testing, start hunting,lol!
Norman, that Cricket .25 is pretty awesome, and insanely quiet!
-
The weather turned out great for once. We need to planned another day if possible full day with barbecue and more seats. Didn't think it was going to turn out that crowded yesterday. Forgot to take pictures.
-
Trinh I think you are using some type of Jedi mind tricks on me. I forgot to shoot the RAW again. Since it's supposed to get to 70% I might go back out and do some more shooting today. Donny I'm sure you will find the pellet that works well in your boss with a clean barrel. And Glen that gun is a shooter. After it got on target 3 pellets went into the same hole-literally. I had a great time as always.
-
I should be able to get a crack at a squirrel or two in about 3 weeks.
This is the only pic I took before my dumb phone said all my memory was gone.
-
Enjoyed meeting you guys and the shoot. I plan on making it out every chance i get. obvious I can learn a lot from y'all :D got first treerat with urban this am. nutterone bites the dust...
-
I know the Gladius is a straight shooter, a hard hitter, and I've got it tuned to get 4 mags out of one charge at power level 4. But it's heavy. I can still myself with something like an FX Wildcat 25 one day.
-
I know the Gladius is a straight shooter, a hard hitter, and I've got it tuned to get 4 mags out of one charge at power level 4. But it's heavy. I can still myself with something like an FX Wildcat 25 one day.
Know EXACTLY what you mean. Mine's the same way, but I couldn't get a shot off at a squizzel the other day to save my life. He's way high up in the tree and moving every so often, and I'm trying to sight on him offhand with my Gladius, and just couldn't get a bead on him... Every time I'd just about get the crosshairs lined up (sorta) he'd move...
Sounds like ya'll had a good time yesterday. Wish Saturday would work out sometimes, cuz my Sundays are always scheduled full.
-
My Sundays always start busy.
-
I think we had a total of 9 out this Sunday which is a great group. One day I might get into the distance shooting you guys were chasing but for now the close stuff is where I'm concentrating. Great meeting the new folks, can't wait until we do it again. From Oct 9 to Jan 15 was a long spell!
-
Football season is almost over. I am down for 10 am Sunday with BBQ . I need another friendly match with Troy and Donny. 8)
-
Yep, it was a much needed shoot for me. It was good to meet all the new folks I haven't met before, and the weather was awesome! I've determined that the Bullboss doesn't like a clean barrel on the long range stuff. It finally started getting on target after about 150 rounds. Maybe I just need to convince Hatsan to let me purchase a LW barrel and be done with it :D I was able to track down a standard 19" barrel, but not the 23"...
Glen, we need to see some dead squirrel pictures soon now. You have a scope and its hitting the target. No more testing, start hunting,lol!
Norman, that Cricket .25 is pretty awesome, and insanely quiet!
Have you tried polishing the barrel? Also the hammer tube? My AT44 .177 is not very accurate, so those are the first things I'm going to do. Of course, polishing a .177 size barrel is not going to be as easy as, say, a .22 or a .25, but we'll see how it goes.
-
Yep, it was a much needed shoot for me. It was good to meet all the new folks I haven't met before, and the weather was awesome! I've determined that the Bullboss doesn't like a clean barrel on the long range stuff. It finally started getting on target after about 150 rounds. Maybe I just need to convince Hatsan to let me purchase a LW barrel and be done with it :D I was able to track down a standard 19" barrel, but not the 23"...
Glen, we need to see some dead squirrel pictures soon now. You have a scope and its hitting the target. No more testing, start hunting,lol!
Norman, that Cricket .25 is pretty awesome, and insanely quiet!
Have you tried polishing the barrel? Also the hammer tube? My AT44 .177 is not very accurate, so those are the first things I'm going to do. Of course, polishing a .177 size barrel is not going to be as easy as, say, a .22 or a .25, but we'll see how it goes.
The barrel on both of my guns has been thoroughly worked over :D It isn't that it isn't accurate, but the pellets it likes change depending on the level of how clean it is. Turns out that the Bullboss was digging the Barracuda Hunter Extremes after I got it "leaded in" at the shoot. Trinh and I were shooting bottle caps and pebbles off the top of a gate at 80ish yards, so the accuracy wasn't terrible. Most of my pesting is 35 yards and under, and a ton of pellets are accurate at that distance. When you're shooting at the long distance stuff with Norman, Trinh, and Troy the competition gets tough,lol! I've got plenty of excuses just in case I need them...
-
I should be able to get a crack at a squirrel or two in about 3 weeks.
This is the only pic I took before my dumb phone said all my memory was gone.
I bet that quietened that gun down in the picture, haha!
-
When you're shooting at the long distance stuff with Norman, Trinh, and Troy the competition gets tough,lol! I've got plenty of excuses just in case I need them...
Well, if you need any more, let me know. I'm building quite a portfolio.
-
Football season is almost over. I am down for 10 am Sunday with BBQ . I need another friendly match with Troy and Donny. 8)
I should have paid attention to when the shoot was. I need to have a stress relief day and out shoot a few people too. When's the next shoot happening?
-
Yes, you should have paid more attention! We had a good time, no doubt. I have no idea when the next shoot is. I usually just follow the crowd, haha.
-
Well, see what had happened was, I had a.d.d. and got distracted by all these squirrels running around that I've been picking them off with head shots from my disco and condor.
-
The squirrel population has gotten pretty low around here for some reason ;D
-
I got in some new pellets so if it's not raining sunday, I will come out to shoot.
-
Man, what a difference a week makes. The Sunday of the shoot was great weather. Yesterday, a week later, was tornado watch after tornado watch. It's still very windy today.
But the best part of yesterday was...... FALCONS BABY!!! WOOOOOO!!!! Gonna beat those cheaters!!!!
-
I dunno that my squirrel population has gone down so much. I haven't been able to get one to come within range of my new toys. I think they're just smarter now. The third one I got with my 880 was the last, Christmas day 2015.
Haven't gotten the first one with the HW95 OR the Gladius. It's plumb embarrassing. :-[
-
Hello to the Ga air gunners. After a few msg's with blackdiesel on AGN, he told me to join here and to come out and join in the fun of your shots in Lithonia. I live in Colbert, so a hour ride down 78 is a POC. My name is Paul and Benjamin is my son.
Thanks, Paul
-
Hello Paul, good to see you made it. Most click on the "show unread posts since last visit" prompt at the top so it's easy to follow the posts on GTA.
-
Also, I talked to Troy yesterday. A drunk driver pulled out in front of him and he got banged up pretty badly. He said he's ok just in pain. So keep him in your prayers.
-
Hello to the Ga air gunners. After a few msg's with blackdiesel on AGN, he told me to join here and to come out and join in the fun of your shots in Lithonia. I live in Colbert, so a hour ride down 78 is a POC. My name is Paul and Benjamin is my son.
Thanks, Paul
Well that makes about 3 of us within 30 minutes of one another. And one more out near Lexington way...
-
Hi guys, I just purchased an Airforce Escape in .25 cal from Trinh and it is going to replace my .25 cal BT65 QE which I am going to put on the Classifieds soon. I would much rather sell it locally if anyone is interested. The gun is in prefect condition and I currently have it shooting 31 gn Baracudas in the 900-925 fps range. PM me if you or someone you know might be interested. Thanks...Steve
-
I'm always up for some shooting as long as I can make it out there :) I hope to have that little pistol I'm playing with ready to go soon.
-
It's supposed to be 70 degrees and sunny Sunday. I'm down for getting out and shooting.
-
I may be able to do that if all my parts show up in time :D I also have that new barrel to put on the Bullboss, but I haven't touched it yet, since I've been playing with the PP700s-a. Actually, I guess it won't really matter if it is loud out there. Anybody talked to Trinh about going? I think he will have a Kral showing up soon.
-
I probably can make it out there Sunday. Saturday supposed to go hog hunting but I think my wife can let me go play on Sunday. Since today is Valentine day, let me see if I can get some brownie points. My hog hunting has been a fiasco but i am determined to get some bacon.
-
Hello Paul!
Man, so sorry to hear about Troy. I hope he's ok and everything gets sorted out well. Too bad lawyers for car wrecks never advertise. ;)
I won't be able to come up this weekend; I have a meeting after church. I need to get up there though 'cause there ain't no shootin' down here! Still haven't found a place. I need to spend more time looking.
Oh, I met a guy named Ralph on another site and he's in the ATL area and might join up here at GTA and show up to a shoot. I mentioned that you all were getting together this weekend.
-
Okay, so who's going shooting? Norman, Trinh, new peeps? I'll be there.
I got my reflex sight mounted on the pp700, and I just need to get it sighted in. I shot 15 shots in my hallway to get the sight in the ballpark, and it still had 170 bar left. I kinda like that little Truglo sight so far, but I haven't used it in the sunshine yet.
I didn't get around to changing out the barrel on the Bullboss, but I figure I'll see what it does without me cleaning it this time. I do have a barrel though, so I should be able fix it if it don't behave. Hopefully, we'll get to see how that Kral of Trinh's does at range :)
-
I will be there. I think Joseph and Paul are coming. Based on my last communication Paul is bringing a guest. We should have enough people to make it an event. I'm bringing a table and chair. If someone else have a table and chair to bring I think that will be enough shooting surface.
-
Sounds good. Last time I talked to Trinh(facebook) he said he was going, but that was a few days ago... What time is everyone supposed to be there? I'm gonna try to be there by 1.
-
I thought about y'all when I drove down I-20 this afternoon... Hope you guys had fun.
-
We sure did! We killed all kinds of random objects :D
-
Great weather yesterday down here. Wish I could've been there.
-
Donny's pistola was impressive. He was knocking bottle caps off at 60-80 yards with just a dot sight, not sure if it was him or the gun though. :D
-
Donny's pistola was impressive. He was knocking bottle caps off at 60-80 yards with just a dot sight, not sure if it was him or the gun though. :D
That was luck. Even a blind squirrel finds an acorn sometimes :D
-
I would have order a pistola like yours but yesterday some *sshat stole my credit card info. and decided to order $1100 of women's clothing online. C.C. company called to confirm and I told "NO". If they would have pay attention to all the charges I have on my credit card , they would realized all my charges are for guns, ammos, and adult toys. ::)
So now I can't do any shopping for a while until they send me a new one.
-
That is never good man :( I had that happen to me, and they tried to spend $650 dollars at Applebees of all places,lol! Mine got stolen from a Krystals drive through >:(
-
Well, looks like Troy isn't the only one with a .30 cal Jager. Just broke down and bought one from r&l.
-
Congrats Tony, that is a sweet gun!
-
Tony, after talking to you. I got a chance to shoot one when Troy showed up this past weekend. That is one mighty gun from Russia. I tried to trade him for my Kral but he wouldn't have any of it.
-
Tony congrats. That is a nice gun.
-
Shooting his spoiled me. I realize it was a must have in the collection, even sold one of my .257 to cover the most of the cost. Thanks and I'll try to make the next shoot if my swfa scope is in by then.
-
Tony, you caved to the Darkside...again ;D :D ;D Congrats on the new shooter, they seem like awesome airguns. If they came in .25 cal I would own one but not quite ready for .30 just yet.
-
They are in 22, 30 and 35 cal. I wonder why no 25 cal?
-
I know if you look them up and get on a Russian site, you can order them in .25 or 6.35 mm. But with R&L and wildwest airguns the only sellers of the Jager's in the US, you're limited to 3 calibers. Norm, I'm kinda regretting selling you all my .30 cal pellets. "dang" near every where is back ordered 44.75 gr. R&L had some and I ordered 4 tins of 44.75 jsbs and 4 cans of polymags. Then midway has the vortex .30 Cal's for kinda cheap. $15 a can and I ordered 8 cans of those too. Now if Swfa will get the 42 mm sunshades in stock, I can get my 3.5-15x42 scope from them. They have them on a sale right now for $450 with sun shade and Butler Creek caps.
-
I tried some of the Vortex and they shoot better than JSBs. H&N makes Vortex but they use the JSB dies and the dies are new so the pellets are more consistent than pellets from the older JSB dies. Do you need me to give you a couple of tins to get you started? I'm still happy you gave me such a great deal on the pellets ;D
-
Thanks for the offer Norm, but I have 16 cans coming in the mail. Rifle won't be here till Wednesday with 8 cans of pellets, so I think I'm covered for shooting for alittle while. I'm getting some slugs from Nick to try his swagged .30 cal and Al of Areo Magnum is sending some for me to test. I'm just going to have to break down and buy a compressor or something to fill my tanks with. Who'd be good for shooting next Sunday? I really need to sight this rifle in and tune her up.
-
I might be able to shoot, assuming I'm not forgetting something I'm supposed to be doing,lol!
-
I'll see what I can do about getting up there again. I need to do shoot that Kral before Trinh moves it.
-
Lol he does have a bad habit of letting them go quick. I think I'll have all my stuff by Friday and would be game for Sunday shoot if weather permits.
-
Once again, I could do Saturday Mar 4, because I'll be in Atlanta for another reason. Just throwing that out there in case someone else wants to meet up.
-
Once again, I could do Saturday Mar 4, because I'll be in Atlanta for another reason. Just throwing that out there in case someone else wants to meet up.
Hello Jim. Saturdays are not good anymore. There are new owners of the quarry that's inside the gate and it's open on Saturdays. A few months ago some powder burners were out there shooting and some of the drivers for the quarry called the police because the shooters wouldn't stop when the drivers were exiting the gate and their vehicles was almost hit by bullets. The officer asked me to just shoot on Sundays to avoid any complaints by the people working at the quarry.
-
Oh well. Guess I'll go to Highland Woodworking store instead... ;D
Thanks for the heads-up.
-
I can be out there if the weather permits.
-
Hey Trinh, when is that barrel supposed to show up?
-
Looks like Kral listing those two guns I was looking forward to. If they are released in the US all that about me not getting a new gun is out of the window
(http://kralav.com/tr/wp-content/uploads/2017/01/puncher-jumbo-min.png)
(http://kralav.com/tr/wp-content/uploads/2017/01/puncher-bigmax-min.png)
-
I like the one on the top, but not so much the one on the bottom. I saw where they have a semi-auto version on their site too.
-
They need to release a carbon fiber version of the bottom rifle. It's would shed 2 plus pounds off the weight.
-
Asking Terry if he'd like to come up with me. Not sure how much he's shot that FX Verminator yet.
-
Hey Trinh, when is that barrel supposed to show up?
Just got the confirmation that I should be getting it either tomorrow or Thursday.
-
Do you have your Impact back yet?
-
Do you have your Impact back yet?
Yes I also ordered a .22 barrel kit. Those .30 pellets get expensive after all while lol.
-
Lol, man order them 2200 at a time lol
-
Hey will anyone have a tin of JSB 25's I can buy on Sunday? I ran out at the last shoot and haven't ordered any yet.
-
What size of grain Glen? I can loan it to you.
-
Hey will anyone have a tin of JSB 25's I can buy on Sunday? I ran out at the last shoot and haven't ordered any yet.
I think I might have a tin or two around here (inside joke) that I can give you-not sale. ;D
-
yay!!
I'd love to do a video on a side by side of the Kral and Bullboss. Maybe toss in the Gladius for fun.
-
Kral has some interesting new things going on their site....KLONES ... Looks like they plan to be the low price leader...
-
Trinh, I've been thinking, and I think you and Troy should just machine that poly barrel to fit an AT-44/Bullboss instead. I mean, you don't really need it, haha :D I'm just joking. I am very curious to see how that poly barrel turns out though. You know I've been thinking about doing the same thing for a while, but I'm slow and usually broke. How complicated is that Kral barrel on the breach end?
So it looks like the weather might be okay for Sunday. Partly cloudy in the 60s, but I didn't hear mention of rain, so that's good. I do plan on making it. I gotta do some "studying up" on BT65 triggers, so I can put Norman's back together!
-
I have a couple of cans of .25 that I was trying out to find the pellet my condor liked. You can have them Glen if I make it.
-
Glen I am going to try to come out on Sunday as well. I have some AA 25 gns that you can use as well.
-
Here is the breach end Donny. Doesn't look that difficult. (http://i1231.photobucket.com/albums/ee518/TinSoldier770/CA527493-1234-4F63-932D-ABCADBA7DAAF.jpg)
-
At least both ends aren't threaded like the AT-44 barrels are, and the extra cap on the breach end.
-
Looking forward to it! I can always count on Tony to bring the loud guns! Do we need to bring anything? I'll get up there before 2 I hope.
-
Lol, well, if I put her back to .257 she's going to be loud, but I have my condor setup to shoot .25 cal 33.95 jsbs right now. I'm more or less ready to get the Jager up and going. She's scoped and 2200 pellets to feed thru her. Just need to sight her in and slow her down some as my shot card from r&l shows her pushing the 44.75 at 990 fps.
-
So we're on for shooting tomorrow at the landfill correct? What time will everyone be showing up? I've never been there before so I'm looking forward to shooting with everyone again.
-
Hello Tony. We usually get there around 1:00pm. I checked today and the illegal dumpers were busy. But you can always park on the street. Once you turn onto Scales rd just go to the place where there is closed yellow gates. You will see a place to park on the right.
Scales Landfill
7200 SCALES ROAD
Lithonia, Georgia 30058
-
I had fun shooting today as always guys. I'm glad Glen got to make it finally and shoot at stuff :D It was good to see all you other cats too, of course.
-
Lots of fun! Can't wIt until next time. Trinh I like the Kral. I know you'll get that trigger lighter.
-
Donny, you're a bad influence. I ordered a .22 pistol from mrod air. Might hit you up on some tuning tips. Figured it be a fun plinker and Mobile squirrel killer.
-
Haha, no problem man ask whatever ya want. If you've seen the post I made about it, that'll show you a lot of what I did to it. The .22 version should be a little beast with the right tweaks...
-
That's hopefully the plan. Make it a 20 plus foot pounds gun to hunt with.
-
That gun was fun to shoot.
-
Just met a gentleman on another site named Chris that lives just down the road from where we shoot in Covington. He might come along here in a bit.
-
I am so tempted to order the same pistola like Donny. However with the recent incident of my credit card being used fraudulently (since I rarely used credit card, mainly paypal). They (Mrodair) were one of the few places I last used, I am a little apprehensive about placing another order with them. Besides, he is probably not happy that I did a charge back either because I had cancel an order and it was never was credited after 2-3 weeks. But I sure like his LDC options. :o
-
Rocker1 got his in today from Aceros... He was mad, because he had too much work to do, before he could play with it,lol! Those PP700s are starting to multiply like rabbits here in the states it would seem. They really are a heck of a deal for a PCP pistol that actually has the juice for small pesting past 20 yards. I really wonder how good I could shoot with it, if I had a 6-7X pistol scope on it...
On a side note, I can't wait to see how that LW barrel turns out on your Kral Trinh!
-
I machined the walther lothar barrel for trinh he is picking it up thursday lets see how it groups now.
-
Y'all realize we all have a issue. I shoot Troy's Jager, buy one. See Donny's pistol, bought one and didn't even shoot his. Heard Trinh's impact and kinda want to see what it sounds like in .30 cal now. Troy's rapid I would love to find a deal on one of those. Norm's carbine looked like a shooter too. I'd personally want a .25 or larger. Troy, have some 47 gr epp slugs coming along with some 57 and 61 grain slugs to try out in the Jager. Al still hasn't gotten his finished. Maybe this coming Sunday we can go have a shoot if everyone's not to busy.
-
I see no problems there,lol! Trinh's Impact in .30 is pretty dang quiet for a .30 IMO...
On a side note, I have decided I'm going to sell my AT-44. There is nothing at all wrong with it, but my Bullboss fulfills my needs, is the same caliber, and capable of the same power(almost). I currently have the AT-44 tuned to shoot 20 shots with an ES of around 30fps and an average of 954fps with the JSB 25.39s(.22). It is easily capable of 50+ shots at 30fpe with a few turns of the hammer spring. Actually, it can be tuned for anything from 10fpe to 60fpe with just hammer spring adjustments. If any of you guys may be interested, just let me know. I'll probably list it in the classifieds soon.
-
Donny I'm broke. Between the Jager, 2 swfa scopes and that pistol and moderator, my fun money is spent. But to shoot the Jsb monsters at that kind of speed, dang.
-
I won't be able to make it this Sunday as I am going to look at a chevy truck in Alabama . Last shooting I had with you guys made missed out on a black 86 c10 shortbed survivor >:( . I am stick kicking myself for not going to check it out. It was sold next day. However let me know If you guys are shooting, I have a guy interested in coming out. He is from Newnan and have a large land, he keeps inviting me to come to shoot. He is mainly a springer but interested in PCP. Maybe Donny can show him the AT44.
-
Donny I'm broke. Between the Jager, 2 swfa scopes and that pistol and moderator, my fun money is spent. But to shoot the Jsb monsters at that kind of speed, dang.
I think the fastest I've got it to shoot them is 1036fps :D That wouldn't be a very useful string though. I'm sure I could do a darn near 1000fps tune on it for 10 shots at least though,lol! As far as I know, I haven't seen anyone else get that kind of power from an AT-44 in .22, but I could be wrong? The PEEK valve seat is what really made that possible.
I won't be able to make it this Sunday as I am going to look at a chevy truck in Alabama . Last shooting I had with you guys made missed out on a black 86 c10 shortbed survivor >:( . I am stick kicking myself for not going to check it out. It was sold next day. However let me know If you guys are shooting, I have a guy interested in coming out. He is from Newnan and have a large land, he keeps inviting me to come to shoot. He is mainly a springer but interested in PCP. Maybe Donny can show him the AT44.
Everybody knows Chevys are the devil Trinh, and you should only buy non-Chevy products, haha! I'm just picking at ya... Chevys are cheaper to build engines for though. I know I definitely can't make it on the weekend of the 26th to shoot. I may be able to this coming weekend, but I'm not positive about that. We all need to make friends with that guy with the land if he has critter problems!
-
Trinh, you need to find a late 60's C10 step side. Much prettier truck IMHO. If it doesn't rain Sunday, I might be able to come down Sunday if everything goes well.
-
I doubt I will be able to make it Sunday. If i do come out it will be for a short time. I went out this past Sunday for a couple of hours and saw that the dumpers have been busy again. The county usually clean up there at least once a month so it might be cleared by Sunday.
-
I won't be there Sunday. The table I brought last time is being confiscated by my wife for her classroom, so I've got shooting table on my wish list. We'll see.
-
Good news. They cleared the trash from the shooting area. There is still a large roll away dumpster there but it should be moved by Sunday.
-
I'll probably be out of town this Sunday, but at least they cleaned it up!
-
Thinking of shooting up a can of some .30 Cal's Sunday if y'all want to come out and shoot at the land fill.
-
I can't make it this weekend but I just met a gentleman on another site by the name of Charles, from the Athens area, and he might join y'all this weekend. He'll check in here probably if he decides to go.
-
It's supposed to rain on Sunday. weather report showing 70% chance of rain and thunderstorms.
-
Do y'all think this would work well w/my Gladius?
https://www.pyramydair.com/product/mtm-case-gard-predator-shooting-rest-for-rifles-pistols?a=4006 (https://www.pyramydair.com/product/mtm-case-gard-predator-shooting-rest-for-rifles-pistols?a=4006)
It's either that or 2 bags, front and rear.
-
I've seen them a lot cheaper at Walmart online and Amazon. I had one when I first got a PCP but later got a Caldwell because of adjustability.
-
Do y'all think this would work well w/my Gladius?
It's either that or 2 bags, front and rear.
This is the rest I use for shooting.Caldwell DeadShot ChairPod Aluminum. Kills two birds with one stone. Great rest and chair all in one. Great for shooting over a field with multiple targets where you need to move your rifle around. Chair Swivels.
-
Hey Chris. Are you in the Covington area? I think Trinh had one of those chairs at one of our shoots. I think I saw him with one. Norman uses the standing version of the dead shot field pod and Bob uses the seated version.
-
Well, it's official, the Jager is going to Allan Z in a couple of weeks.
-
Well, it's official, the Jager is going to Allan Z in a couple of weeks.
I'm a little out of the loop on this.... Are you selling it, or getting it tuned?
-
Shes getting work done. Who's all coming out tomorrow?
-
I am actually in town for a change this weekend. I may come out for a little bit
-
Well, the bar has been set, it's official we can shoot jsb's .30 out to 243 yards and hit a propane can.
-
Well, the bar has been set, it's official we can shoot jsb's .30 out to 243 yards and hit a propane can.
I guess I'm just going to stay home when the next shoot comes around too,lol! Did you guys do that with the Jager?
-
Actually, we popped it with Norm's hercules. Might have shot a tin of pellets all around it, but we hit it. The Jager needs alittle ummmm massaging from Allen. Troy didn't bring his to try it, but I believe he's going to this coming week. Might talk him into bring the .50 also, so bring some ear plugs.
-
Wow! The weather sure was good for shooting today too. I gotta ask, how much was the holdover??
-
Actually not much holdover. The scope is 3-18x50. It's zeroed at 50 yards @12x. The magnification lowered to 10x the hash mark between the 2 and 3.
(http://i4.photobucket.com/albums/y114/blackdiesel/51I5C9bsl3L_zpsay9lze6z.jpg)
-
I would have thought more than that would be needed. What speed is the Hercules shooting at? Either way, pretty impressive. You guys need to try and get that on camera.
-
It shoots the 44 gr JSBs a little over 1000 fps for the first 10-15 shots from a 230 bar fill. But they stay stable even at long distance. Sometime this week if the weather permits and I get a little time I'm going to go out and adjust my zero with the adjustable mounts so I can aim bullseye on target and try again. I knocked dust up against the can or hit a little too long with a lot of my shots.
-
I'm going to order some unsized cast epp slugs and see if that will help with the accuracy issue I had with them as Randy suggest I need a .304 sized cast. Maybe that will be alittle more accurate out at that range. Either way, I want to start shooting 150 plus as a norm out there. Makes it's mmmmm more of a challenge. Don't blame me when y'all get bit by the bug and get hooked on shooting past 100 yards.
-
I thought I was going to make it this coming Sunday but I can't.
-
It's supposed to be nice Sunday. Who's all going to make it to shoot for a couple of hours.
-
I'm tied to Columbus that day.
-
I'm gonna try and make it. I'm hoping it isn't windy...
-
Wear some good walking shoes tony keeps putting the target back further ,the toys that shoot show is saturday in findlay ohio just saying.
-
I wish I can make it. Maybe in 2 weeks?
-
I can go this weekend, and possibly the next. I'll be doing that photography stuff for Road Atlanta the last two weekends in April, and the second weekend in May though.
-
So.... Is anyone shooting tomorrow, or are we waiting until more folks can make it?
-
Troy and me are down to come out. I've already talked to Troy to confirm he's going to make it.
-
Okay, cool! I will come out for a bit then. I need to try the pistol out at some longer ranges with the new glass on it. I won't be shooting any 200+ yard shots with my Bullboss, but I think I'm good for maybe 125-150 yards. I never shoot the long distances out there, because I'm usually over on the side where I can't see any of the targets for the weeds. You may want to make a post on the FB group as well, just in case?
-
Donny you will have to change your shooting place. They dumped a couple of mounds of dirt and rocks in your usual line of fire. :(
-
Donny you will have to change your shooting place. They dumped a couple of mounds of dirt and rocks in your usual line of fire. :(
Oh well, I'll figure it out. If there's one thing I'm not, it would be picky about where I shoot. Heck, my entire shooting setup is a folding chair,lol!
-
I'm going to be there around 1-2. Depends on traffic
-
Same here. I'm going to shoot for 1ish, but you never know when you have to go all the way through Snellville.
-
When church is letting out, it gets bad. I'm about to call Troy and let him know you're coming also. If you happen to have a table, please bring of you can.
-
So I saw another guy on AGN having the same problem with his cocking lever popping out on his Kral. There is another guy here that is suppose to be machining a new cocking lever with the dimension so that it won't pop out. I am tempted to get another Kral. I actually miss tinkering with mine.
-
Hi, Guys. New to GTA and thought I'd say hello. If I can make it past the labyrinth of freeway closures around town it would be great to get together to say hello and shoot one day.
-
Looks like you have some nice guns look forward to meeting you.
-
Looking forward to meeting you Ben. Don't know when I'll get up that way again. We're just about at the 'it's too hot to shoot' time of year for a while now.
-
Hi Ben, welcome, look forward to meeting you. I am up on the north side of town and have not been able to make it to the landfill yet, hope to soon.
-
Looking forward to meeting you Ben. Don't know when I'll get up that way again. We're just about at the 'it's too hot to shoot' time of year for a while now.
What is this "too hot to shoot" you speak of? I am not aware of such a thing :D
Hi, Guys. New to GTA and thought I'd say hello. If I can make it past the labyrinth of freeway closures around town it would be great to get together to say hello and shoot one day.
Welcome Ben!
-
Hi Ben, welcome, look forward to meeting you. I am up on the north side of town and have not been able to make it to the landfill yet, hope to soon.
Landfill sounds interesting... Targets or rats (or are they the same :))
-
It is usually just targets. But we do shoot pretty long shots. The most frequent distance we shoot is usually around 80 yards. We do shoot 100-125 yards often as well. Some of the guys have even topped out at 240 yards! Of course we do shoot shorter distances often too. The 80 yard mark just happens to be a good place to put "targets", which can be anything from dime sized rocks to cans.
-
Let the Jager get back from Allen. We're going for 300 yards hopefully with cast bullets. Welcome to the club Ben. Might need to bring your daystate out and let us look it over. I might be interested in a new toy.
-
I've not shot a Daystate yet. Love to try it out.
Donnie, how can you look through a scope with sweat in your eye? ;)
-
I've not shot a Daystate yet. Love to try it out.
Donnie, how can you look through a scope with sweat in your eye? ;)
That is what hats and caps are for! Or, if you want to feel like its the 80s you can wear a sweat band,lol!
-
Welcome Ben....we all need to set up another day for some shooting fun soon.
-
Welcome Ben....we all need to set up another day for some shooting fun soon.
I can't this weekend, but possibly the next?
-
Looking forward to getting together but Saturdays are difficult for the next couple of weeks. I'm probably 2-3 weeks out before I can make a Saturday shoot.
-
We usually shoot on Sundays, fyi :)
-
Yeah Sat. is a NO GO because the landfill is open and they don't like seeing leads flying past their windshield as they go to work.
-
Hello Ben good to see you made it over here. Question: Are you the same Airgun Atl that sell the Huggett LDCs? I think you will like the new Cricket carbine. I traded mine for the Omega compressor that I recently sold- I hated to let go of the cricket but it was a great trade for me.
-
Hello Ben good to see you made it over here. Question: Are you the same Airgun Atl that sell the Huggett LDCs? I think you will like the new Cricket carbine. I traded mine for the Omega compressor that I recently sold- I hated to let go of the cricket but it was a great trade for me.
I got the carbine and sent it off the next day to Charlie at Georgia Airguns to tune it up. Somewhere along the way someone had dremmeled the cocking faceplate (it is a legit mod, but this one was bungled) so it needed to be replaced and the hammer spring seemed a little tired. I had to max out the HST to get to 32fpe with no room to spare. So Charlie is going to replace some parts, give it a once over, change the orings, etc. I decided to refinish the stock while he has the action. When I got the gun the stock was orange. No kidding. What's odd is that I already own another orange stocked gun. So another week and it will all be back together. Yes, I do have Huggetts from time to time. :)
Here's my other orange gun, .25 BSA Ultra:
[img width= height= alt=" width="600" height="371" class="bbc_img resized" style="cursor: pointer;]http://i649.photobucket.com/albums/uu214/mywifeboughtit1/Misc/IMG_20170408_121110_zpsdjp3au5c.jpg[/img]
-
Who's up for shooting Sunday??
-
Hmm. I'll be waking up in ATL Sunday morning. I'd just have to bring my stuff along. This weekend is getting better by the minute.
-
Look like more stuff been added to my plate. So it's looking like I will not be able to make it out there Sunday. If anything change I will try to get out, but not looking good right now.
-
I've never been there when you weren't there. We won't know what to do!!!!!!
-
So right now it looks like me, Tony and Troy will be there for sure.
-
Who's up for shooting tomorrow?
-
I think it will be pretty windy if yesterday was any indication. It is still gusting pretty good here now. I've been at the track the last two weekends doing photos, and this is my first weekend "off" in a while, so I've been catching up on chores around the house. I have to be at the track next weekend too, but at least it is for Drift which is always a hoot. I'll be up for some target practice from 5-21 on though :)
-
I should have my Jager back by then also. It was fairly breezy yesterday, but we had some fun. Noman's RAW is pretty dang accurate.
-
I would expect no less from a RAW. I know Trinh's was pretty dang nice as well. Those guns are tack drivers!