GTA
All Springer/NP/PCP Air Gun Discussion General => Air Gun Gate => Topic started by: oldpro on January 18, 2019, 06:54:39 AM
-
Since I will be at Shot show all next week I will post pics and videos of all the great attractions. If there’s something you would like to see please say so below and I will do my best to get pics etc.
-
Safe travels Travis.
-
Gamo urban in 177? Kaliberguns
-
Following
-
I want to see you, with an Air Speed on hand, with two hot girls at each side of you, up close. And they better have JSAR half shirts on, lol.
I envy you, as I’ve always wanted to attend a SHOT SHOW. My neighbor is the CEO of Trijicon scopes. He’s big bucks man around here, especially since his company landed an account with the federal government and military for all night vision and heat seeking thermal vision. He was suppose to take me, but he let his ego and arrogance get in the way of our friendship, so good bye to that offer.
Defiantly on my bucket list. Have fun, Travis!
-
MANY thanks for posting Travis.
This should be in the Airgun Gate or Announcement Gate for sure. Not just PCP specific.
:)
-
Love to attend one some day.
Think they'll have the Gen II Fortitude there?
-
It's on my bucket list to attend as a representative of GTA International Airgun Forums with a media pass. But being held in January, it always sneaks up on me as I recover from the holidays. Maybe next year I'll be close enough to retirement to make the trip. Teresa and I have been to Vegas a few times and have enjoyed every visit. But I want to wander around the Shot Show, meet folks, rub elbows and hand out GTA paraphernalia.
:)
-
That would be great.... you could take a tablet so we can all go with you... :P
-
Travis if you get a chance can you spend some time at the Kalibrgun booth, I'd like to see anything new coming from them.
Thanks.
-
Thread relocated to Announcement Gate.
-
It's on my bucket list to attend as a representative of GTA International Airgun Forums with a media pass. But being held in January, it always sneaks up on me as I recover from the holidays. Maybe next year I'll be close enough to retirement to make the trip. Teresa and I have been to Vegas a few times and have enjoyed every visit. But I want to wander around the Shot Show, meet folks, rub elbows and hand out GTA paraphernalia.
:)
If you need someone to carry your bags <raise hand>
-
I would say that's why I'd take Teresa. But it's more like I'll be her Sherpa.
LOL
-
I would say that's why I'd take Teresa. But it's more like I'll be her Sherpa.
LOL
I will go with you Dave! We can make and event of it.
-
Travis, you guys setting up a JSAR booth or just doing as I would do and mill around the event?
-
I would say that's why I'd take Teresa. But it's more like I'll be her Sherpa.
LOL
Are you implying that retirement is making her soft???? 8)
-
She's not only back at work but hitting the gym 5 days of a week.
-
I saw where Armour-lite and Iso-Brite watches will have a booth near the main entrance. Stop there for a minute and look around. I have an IsoBrite and am very impressed with it.
-
I want to see everything airgun thats new and exciting from around the world. Pictures are always nice!
Thanks Travis!
-
I landed safely and very late as our plane broke down on the runway and I missed the connecting flight but I’m here!!!! Finally
-
I think if my plane broke down on the runway I would go back home. I'm not one to ignore the signs.
Have fun and be safe.
-
It was probably just a bad O-ring !
-
If it was I'm sure Travis had one in his pocket.
-
Looking forward to seeing all the new airgun stuff being offered! Glad you made it safely there, enjoy!
-
Good that the plane broke down ON the runway!
Enjoy the show.
-
Hey, those aborted take-offs are exciting!
0 to 160 mph, and back to 0 in less than 1 minute with 300 total strangers. 🤔
-
Hey, those aborted take-offs are exciting!
0 to 160 mph, and back to 0 in less than 1 minute with 300 total strangers. 🤔
Had it happen to me one time leaving Atlanta for Kansas City. It definitely tightens the sphincter :o ::) :P
-
Travis? Come in Travis.
We were kind of expecting to see your new offerings.
-
I had one happen on Adak Alaska with cabin filling with smoke and civilians heading for the exits!. Not sure where they thought they were going to go at 100+ mph but they were moving. Planes nose wheel actually went off end of runway before he got it stopped. Ended up spending the night after a 2nd failed attempt to take off. 2nd was much less dramatic! Ended up spending the night and getting hammered with a bunch of navy folks.
-
Hawk... I wanna see the Hawk!
It was probably just a bad O-ring !
Wasn't that the blame for the space shuttle "Challenger"?
-
Travis, if you get chance would you please have a look at the Space model on the Kral stand. Ergonomically to my eye it looks right and Kral say it has new barrel and trigger. (New does not always mean good.) Min power in .22 14ft/lbs and max 50ft/lbs. Max power in .25 65ft/lbs. Large power wheel should allow easy power adjustment over whole range.
This was due for release here in Turkey this month but this has now been pushed back to after IWA. I am looking to buy at as soon as available so am looking for any input (positive or negative). I know you have some knowledge of Kral's shortcomings in the past as you make parts to overcome these.
Thanks in advance.
-
Busy day my friends I’m running all over the place and have several meetings to get threw then off to the Beef! Hawks are not assembled yet but that’s next after my meeting at 3:30 then I’ll try and get pics. Tomorrow is the actual first day of shot show this I didn’t know and today is Vendor set up day, it looks like a tornado blew threw here right now but by tomorrow all the vendors will be up and running. Feet hurt but the mind is ready to go
-
Hang in there! We're all rooting for ya! Go Travis!
-
Fight the good fight!
-
Yeah Travis, it's a party without the guest of honor!
I hope that you don't need to start a new thread.
-
<<<--- :-X
-
Busy day my friends I’m running all over the place and have several meetings to get threw then off to the Beef! Hawks are not assembled yet but that’s next after my meeting at 3:30 then I’ll try and get pics. Tomorrow is the actual first day of shot show this I didn’t know and today is Vendor set up day, it looks like a tornado blew threw here right now but by tomorrow all the vendors will be up and running. Feet hurt but the mind is ready to go
i kind of enjoy the excitement of the wait
-
I hope at least one of you will be wearing a GTA hat or something to represent the clan.
-
I hope at least one of you will be wearing a GTA hat or something to represent the clan.
!!!!$##@@@ I forgot my GTA hat I was in such a hurry I just forgot? I’ll make a GTA YouTube video if that makes up for things
-
I hope at least one of you will be wearing a GTA hat or something to represent the clan.
!!!!$##@@@ I forgot my GTA hat I was in such a hurry I just forgot? I’ll make a GTA YouTube video if that makes up for things
That'll do. Relax and have fun. You build great guns ;)
-
Trying to upload pics but when I hit the + attachments no area pops up to add pics like in my Vendor Gate or elsewhere hhhmmm
-
Hmmm....may be because it's in the Announcement Gate. Thinking of moving to Airgun Gate? What say you. I think that is the more appropriate area.
Sure don't want to miss out on photos and videos of the Shot Show!!!!
-
;) ;D DEz the fixer ;D
-
I'm having a hard time following this thread, it keeps moving around.
-
THIS thread hasn't been moved except originally from the PCP Gate. There are 3 separate threads running at the moment with the Shot Show as the topic but in different locations. To me, they should all be either combined into one thread or as a minimum be located in the same gate. Putting like topics all over the forum causes confusion IMO.
-
I was just kidding.
I think that a lot of us are curious.
Please move it so he can post video.
-
I was just kidding.
I think that a lot of us are curious.
Please move it so he can post video.
+1
-
Moving to Airgun Gate.
-
I'm very interested in what Crosman/Benjamin did to the Fortitude and if the 'Improvements" are available to folks that already own the Fortitude ? ... I own two ;- )
wll
-
I got a few moments to get out of the booth
-
looking good!!
any more budget compressors?
-
Awesome stuff! Keep em coming!
-
Hey Travis
Next time hold/rotate the camera 90* to the right............LOL
All the photo's need to be rotated 90* towards the right............ ;)
Just jerkin your chain........
I am very OLD and my neck just doesn't turn that any more..........
Tia,
Don
-
Hey Travis
Next time hold/rotate the camera 90* to the right............LOL
All the photo's need to be rotated 90* towards the right............ ;)
Just jerkin your chain........
I am very OLD and my neck just doesn't turn that any more..........
Tia,
Don
If you click on the pictures it turns them the right way.
-
Hey Travis
Next time hold/rotate the camera 90* to the right............LOL
All the photo's need to be rotated 90* towards the right............ ;)
Just jerkin your chain........
I am very OLD and my neck just doesn't turn that any more..........
Tia,
Don
Don, click on the pic, they will straighten out for ya! We wouldn't want you getting a crick in your neck!
-
its really great to see you with Evanix, you both look good together
-
Thanks Guys,
I didn't know that trick,
I was getting kinda tired holding the computer screen sideways to see the photo's.........Lol. ;)
Tia,
Don
-
WOW !!! I actually thought Travis was so excited that he was levitating.... ;)
-
Rick Ream stopped by before dinner tonight to say hey. The Hulk stopped by too!!!
-
Any word on availability of the new redesigned Air Speed mags? I see there are some posted on the JSAR Webpage, are these the new design or the old design?
-
Rick Ream stopped by before dinner tonight to say hey. The Hulk stopped by too!!!
Cool! Sounds like loads of fun being there.
-
Look who stopped by my old buddy Tom (Slayer) Costan!
-
Look who stopped by my old buddy Tom (Slayer) Costan!
Now that's a great picture!
-
Kewl...
-
If you see Giles from "AirgunGearShow" there, get a pic and tell him I said keep up the good work on his reviews! Bloke is BIG you can't miss him.
(https://i.ytimg.com/vi/F3DR7VBpces/maxresdefault.jpg)
"Bollocks" may be term to throw out.
Ya might want to avoid "Pommy". ;D
-
Look who stopped by my old buddy Tom (Slayer) Costan!
Any details on the compressors at the bottom left?
-
Look who stopped by my old buddy Tom (Slayer) Costan!
looking behind you i see a few new springers with high end stocks, Mike was just telling me he was asking for that
-
https://www.umarexusa.com/products/umarex-synergis-combo (https://www.umarexusa.com/products/umarex-synergis-combo) This looks very interesting
-
Look who the cat drug in! Tim MAC 1
-
Look who the cat drug in! Tim MAC 1
Looks like all of the celebs' are coming out for the show.
-
Got a few videos up here;
https://www.youtube.com/user/NorthWestAirgun (https://www.youtube.com/user/NorthWestAirgun)
I asked Mr Lee about the new Evanix semi auto, and he referred me to Jefferson State Airguns?
-
https://www.umarexusa.com/products/umarex-synergis-combo (https://www.umarexusa.com/products/umarex-synergis-combo) This looks very interesting
Yes, this does look interesting 🤔
-
Been scouring YouTube for Shot Show news on Crosman .. Fortitude II parts may be original fortitude compatible,. can hardly wait till we find out for sure.
The American Airgunner guy who was interviewing IMHO was incredible annoying ... butted in all the time, talked fast ... IMHO was TRYING to be super hip ....Who is that guy ??
wll
-
The American Airgunner guy who was interviewing IMHO was incredible annoying ... butted in all the time, talked fast ... IMHO was TRYING to be super hip ....Who is that guy ??
Haven't watched the video yet, but from your description it sounds like Rossi Morreale.