my .22 version is awesome....so trying the .177 on for size
shot a few hundred out of it and then did a spec barrel clean....then all came alive with vels around 1009-1029fps as it should be goo-gone/ gun scrubber/dry patch, all is good now.
I'm thinking one of these will probably be my first(and possibly only) pcp air rifle.I'm going to give myself a month to think about it, and try to decide on a .177 or a .22.I might can the whole idea and try and find a used Marauder by then though, or get a Prod knowing I'd end up modding it quite a bit, or a G6. I'm in no real hurry as I've got stuff to shoot with.
Quote from: 39M on July 23, 2017, 09:13:35 PMI'm thinking one of these will probably be my first(and possibly only) pcp air rifle.I'm going to give myself a month to think about it, and try to decide on a .177 or a .22.I might can the whole idea and try and find a used Marauder by then though, or get a Prod knowing I'd end up modding it quite a bit, or a G6. I'm in no real hurry as I've got stuff to shoot with.I vote for you to get a Marauder. Even new the prices were down to $366 +-. If they just weren't so heavy I'd use mine more often to romp around with.
Something else to consider... Everytime you fill one of these guns you bleed off the fill hose. The volume of compressed air in that hose is wasted. If you are tank filling and don't have "on site" means to fill it you might want to look into a bleeder for the end of your hose. Then bleed the line off once at the end of the shooting session.