"tweaked" the trigger on my Gamo Magnum and got it about 1 pound. Now you only have to mentally pull the trigger and it goes off. Now the trigger is like my Slavia 630. Definitely tightened up the groups. There is absolutely no creep in second stage now. Literally surprise when releases. M2.5x10mm 0.45mm Pitch Bolts Hex Socket Cap Head Screw was what I replaced the second stage screw with. Used blue lock tight and a very small stiff spring to prevent backing off. If you turn too far in the seer won't catch. Just back it out a 1/16" at a time until seer catches and adjust from there. Makes the CAT trigger perfect!!Hope this is useful to someone else wanting to "crisp" up the trigger.Dave
Have you tried bouncing the cocked rifle against its butt pad to see if it goes off unintentionally? -Y
Thanks canadian_shooter for the info and especially for the bolt size[M2.5x10mm 0.45mm] worked great.I used M2.5 x 10mm 0.45mm, Flat Head Phillips Screw Bolt, Steel, Black Oxide 10 for $3.87.The 3 guns i tried it on were Whisper Fusion Pro sat trigger,Big Cat Hunter sat trigger,and Wildcat Whisper black trigger[looked like sat].
The adjusting screw was screwed all of the way in but when turned anti-clockwise to make it lighter all i got was an already creepy trigger even more creepy!!