How about Millett Angle Loc rings?They also come in a high version. They are a little tougher to align but work great, especially in real shallow grooved dovetails.Taso
I'm a personal fan of the ones I have on my pcp and all the rest of my air rifles for that matter: Hawke Reach Forward Match Mounts. They come in dovetail, weaver, 1 inch and 30mm tube sizes and with not a lot of room for mounting on top of my Galatian, they let me get the Hawke Airmax 30SF 3-9x50 where I wanted it.
Adjustment knob for the illuminated reticle..also came with a side wheel and sunshade I haven't put on the scope at least for now.
Rajod,From what I can find the Burris Zee rings are for weaver not for 11mm or 3/8 dovetail. Burris does have dovetail rings but I haven't seen a 30mm version. Taso
I haven't used the FX mounts but I have a couple sets of the SportsMatch elevation and windage adjustable mounts. They allow you to optically center your scope and zero almost entirely with the mounts if desired (you can get it within just a few clicks with the mounts). Not cheap but they work extremely well and held zero on my Diana 460.
I use utg for all my airguns, good enough esp on PCP. I'll spend more on the powder burners
I use it for all my airguns, good enough esp on PCP. I'll spend more on the powder burners
I've used these to good effect on my Hatsan 95QE in l.25 when I was finding The Pellet: Linkyand I have a pair of these cuz I'm a cheap SOB and they work great on guns with minimal recoil (used on both my Savage Mk2 and my QB 79) > Cheapo ringsAnd these were on my PP700 up until recently (now using a red-dot):Generic Rings that WORK