I went digging and came up with the following 2 pdf's on breakdown of the rifles and it would appear the difference is in the triggers (there are others but that's one of the bigger ones) and why the gas rams are different. The 60s trigger block attaches to the bottom of the receiver tube. On the Model 95, that trigger block when installed, slides up inside the receiver requiring extra space and the slotted blocks on both the end cap and the end of the gas ram and why the 2 extra pins in the receiver as they hold the trigger block in place. On the 95, there will also be a hole drilled in the receiver to allow for sliding a Hatsan fill probe into the gas ram without taking the rifle apart if for whatever reason you wanted to add air to it. https://www.dropbox.com/s/yzmyu0k06kcttid/Hatsan-90-95-SAS-Q.pdf https://www.dropbox.com/s/egaddvaij75x69y/Hatsan-60-60S-noSAS-Q.pdf
I've found the different gas ram sizes on the Hatsan Arms website, problem for us yanks across the pond is finding anyone that will sell them as no one in the U.S. does at least for the moment. I did send an email to Skarg in Poland as they list all of them to see if they'll ship to the States, but they haven't replied back yet.
The folks at SHARG.PL do not speak much English. Unfortunately, their website is the only one that I know of that lists that information. Hatsan USA is so worried about liability that they are not very helpful.Marcel, that is very kind of you to offer that forwarding service. Are you near to Poland?-Y
M-Are you familiar with these people? https://www.db-schietsport.nl/nl/They seem to be even cheaper(not by much)than Krale.FWIW-My father was born in Wormerveer....-Y
Bump! Now that you have had the gun for a year, how do you like it? Did you install a Vortex gasram? What crono numbers do you get? Accurasy?
Marcel,Where do you get the gas rams in the Netherlands?
Quote from: AG72 on May 17, 2018, 06:25:20 AMBump! Now that you have had the gun for a year, how do you like it? Did you install a Vortex gasram? What crono numbers do you get? Accurasy? Sorry for the late reply, I haven't been around for a while.I ended up Selling the Hatsan a while ago, I just didn't get around to doing the conversion & could use the money for another (not airgun related) project so I decided to let it go. I don't own a chrono so I can't help you there but it was pretty accurate as long as I did my part.