Donation

All Springer/NP/PCP Air Gun Discussion General > Share Your Simple Home Projects (TRICKS-N-TIPS)

RWS Clone (Ruger Air/Black Hawk, Xisico B25) Trigger Improvement

(1/1)

normal:
All my RWS clones came with triggers with an ugly side to side wobble.  The gist of the fix is to drill out the holes in the housing and the trigger itself and replace the pin.  I made my pins from standard drill rod, maybe 3/16 diameter, could have been 1/8.  You could measure the stock pin, buy a bit at Home Depot, use it to drill the holes, then make your new pin from the shank of the bit.

Doing this one thing gave the cheap feeling clone trigger a feel about the same as that of my real RWS triggers.

Stone Cold:
I have the same complaint about my black hawk.  I had thought about doing the same thing just haven't got around to it yet.  Nice to know that it work well for someone else.  thanks...

howie1a:
Hi a nice thin brass washer works fine . Howie

Donny:
i think ill try the brass washer first

Navigation

[0] Message Index