Donation

Target Shooting Matches, Discussion & Events > Target Shooting Discussion Gate

TARGET SHEETS FOR THE GTA SHOOTING MATCHES

<< < (2/2)

Random Plinker:
10 Meter Air Rifle target sheet pdf files are attached to this post.  You must be logged in as a GTA member to see and download the pdf files attached below.

Target sheet pdf files with "45" in the name have scoring ring diameters, number font size and scoring ring line thickness compliant with ISSF and NRA 10 Meter Air Rifle regulations.  These targets are for 177 caliber (4.5mm) pellets.  Scoring rings on files with "55" in the name are reduced in diameter so that there is no scoring advantage or disadvantage to making larger 22 caliber (5.5mm) holes.

Regulation targets are black to the 4 ring and extend to the 1 ring.  Targets meeting this standard are attached below; however, variations with a white center are also attached.

Random Plinker:
Gamo target card based target sheet pdf files are attached to this post.  You must be logged in as a GTA member to see and download the pdf files attached below.

No published standard is known for Gamo targets.  Ruler measurements of a production Gamo target card revealed the scoring rings were not quite equally spaced, and in some cases even slightly oval.  The targets attached to this post are based on diameters calculated from the area of each scoring zone.  Area was determined by scanning a production Gamo target card at 600 dpi and counting the number of square pixels inside each scoring zone, including the ring lines, using photo editing software.

The 10 and 9 rings of the attached target sheets exactly match the diameters so calculated to score consistent with a production Gamo target card.  Remaining ring diameters are equally spaced based on a 1 ring diameter of 133.5mm measured with a ruler from a production Gamo target card.  The attached targets also include an "X" dot not present on the production Gamo target cards.

Random Plinker:
Target sheet pdf files with rings increasing in diameter by half and quarter inch increments are attached to this post.  You must be logged in as a GTA member to see and download the pdf files attached below.

Random Plinker:
The NMAR AR-SR and AR-MR targets are described by the CMP as exact, proportionate reductions of standard high power rifle 200-yard short range (SR) and 600-yard mid-range (MR) targets reduced for firing at 10 meters.   Target sheet pdf files attached to this post scale these NRA high power rifle targets based on 0.308 inch (30 caliber) holes scoring on the original targets and pellet sized holes scoring on the scaled targets.  You must be logged in as a GTA member to see and download the pdf files attached below.

Target sheet pdf files with "45" in the name are for 177 caliber (4.5mm) pellets.  Scoring rings on files with "55" in the name are reduced in diameter so that there is no scoring advantage or disadvantage to making larger 22 caliber (5.5mm) holes.  Files with "Wht" in the name have a non-standard white center.  Files with "25FT" are scaled for shooting at 25 feet.  Files with "7Bull" in the name have the black enlarged to the 7 ring (larger than the NMAR targets) to provide a black bull close in diameter to that on the ISSF 10 meter air rifle target.

Navigation

[0] Message Index

[*] Previous page