Donation

All Springer/NP/PCP Air Gun Discussion General > 3D printing and files

Grips for vintage Crosman Singles: 130, 150, 111 etc.

(1/2) > >>

Ascot500:
Has anyone printed grips for these pistols that have parallel front and back surfaces?

TorqueMaster:
I did a quick search for STL files for those Crosman models and came up empty.  Seems perfectly doable, even better if the backsides are flat.  There are other grips with STL files available  (13xx 22xx series) which could probably be modified to work.  If you can post an unskewed image of the outline of the grip (on graph paper would be ideal) , with some dimensions and thicknesses I'll see what I can create.

Ascot500:
Thanks, I will do that

Ascot500:
I don't have any graph paper, but here are some pics:
The measurement on the calipers 1.500"





And here is an example of an original grip:

TorqueMaster:
Looks good, I should be able to work from these.  I need to ask -- is this grip all one piece, or a left and a right side?  I was assuming 2 grip pieces with the grips sandwiching the frame.  If its all one piece I think I can still print it, but will need to know the frame thickness.  And is the grip solid on the bpttom, or is there a rectangular cutout there?  And a general idea of total grip thickness (grip+frame+grip) somewhere in the middle of the checkering.  Also, if you want a thumbrest on the left side only?  Or ambi, or lefty?

Please confirm my estimated measurements from bottom edge of frame to center of screw hole and bottom edge of frame to tube body:

Navigation

[0] Message Index

[#] Next page