Air gun Entertainment and reviews > Hajimoto Productions
Will gauntlet baffles fit a PP750 tube ?
7624452:
--- Quote from: Hajimoto on October 16, 2020, 09:53:55 PM ---As long as Donny's adapter doesn't reach deeper into the shroud than the stock end cap, yes.
--- End quote ---
The OEM end cap threads are exactly the same depth as the Donny FL adapter. I asked mainly because your photo of the baffle install order does not show the air stripper. Thanks.
Hajimoto:
--- Quote from: 7624452 on October 17, 2020, 10:18:16 PM ---
--- Quote from: Hajimoto on October 16, 2020, 09:53:55 PM ---As long as Donny's adapter doesn't reach deeper into the shroud than the stock end cap, yes.
--- End quote ---
The OEM end cap threads are exactly the same depth as the Donny FL adapter. I asked mainly because your photo of the baffle install order does not show the air stripper. Thanks.
--- End quote ---
That is because Air Stripper because it is on the barrel and inside the shroud and not able to be seen in the illustration.
oldpro:
From experience the donnyfl adapter fits and works in place of the factory end cap with the Hajimoto SSP
7624452:
I ordered a set. How to install the air stripper ?
Hajimoto:
--- Quote from: 7624452 on October 20, 2020, 07:47:33 PM ---I ordered a set. How to install the air stripper ?
--- End quote ---
Remove the barrel shroud and install the air stripper on end of the barrel. It simply slides on.
Lube the o-ring with the included silicone grease reinstall the shroud and the introduce the baffle stack in the arrangement illustrated.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version