When measured wall thickness where it broke it was only .080" thick and no way safe at 3000 psi much less 1200 or even 850.
Quote from: buldawg76 on June 19, 2021, 06:31:55 PM When measured wall thickness where it broke it was only .080" thick and no way safe at 3000 psi much less 1200 or even 850. Might wish to re-check your notes on that... .080" is more than suitable wall thickness (considerably thicker than a 1701P/Prod tube @ .065" wall). Believe some of the hipacs were measuring in the .025"-.030" range for wall thickness. The unit I hydrotested for Alex had a wall thickness of .052" under the oring groove.Important to remember that diameter also comes into play...it's not "all" about wall thickness.Al