In using no larger than a 32mm obj scope these 2 rings from Sportsmatch seem to work with the 11mm dovetail of the HW50s..The T031C is low height and the T04C is a medium height. Both are 2 screws at the ring and base and fit the one inch scope tube. IF anyone has any pictures of their HW50s setup with these 2 rings and a 32mm Obj scope ID love to see how that looks. Will they need a shim from any barrel droop to keep the optics near center before any adjustments? What thickness would that be.?
ok, thanks for the pictures and input.Bayman Im on Long ISland,NY Is that close??
And yes tweak means bend. Do it all the time for droop and lateral disparity. Cocking strain will not undo it unless the person is a gorilla. Chances are they'll damage the piston or bend the cocking linkage before they bend the barrel. It takes a fair amount of force. The hold over question is difficult to ask because if I sight it at 50 yds there's no holdover. If I sight it at 20 yards there's no holdover at 20 but there is now a 50 yards. Either my Hw30 or Hw50 with peep sights I can steadily hit a ping pong ball out to 30 yards with a little bit of hold over. Past that I start missing a couple. The peeps are sighted at ten yards.