• Jefferson State Airrifles
  • Air Gun Web - Expert Airgun Reviews
  • Hajimoto Productions
  • Airgun Angie - Backyard Shooting
  • Nielsen Specialty Ammo
  • Dynamic Air Rifles
  • FX Airguns
  • DonnyFL - When silence is a priority
  • Airgun Archery Fun
  • Pyramyd Air
  • Saber Tactical
  • New England Airgun
  • Umarex Airguns
  • Contact us
  • Utah Airguns
  • SEKHMET Airgun Accessories
  • Freedom Gun Targets
  • Evanix Airguns at Airgun Pro Shop
Jefferson State Airrifles
Air Gun Web - Expert Airgun Reviews
Hajimoto Productions
Airgun Angie - Backyard Shooting
Nielsen Specialty Ammo
Dynamic Air Rifles
FX Airguns
DonnyFL - When silence is a priority
Airgun Archery Fun
Pyramyd Air
Saber Tactical
New England Airgun
Umarex Airguns
Contact us
Utah Airguns
SEKHMET Airgun Accessories
Freedom Gun Targets
Evanix Airguns at Airgun Pro Shop


Author Topic: Xisico JTS GX-E-CS3 Compressor In Stock  (Read 14406 times))

Offline Arkmaker

  • The Mad Irish American AirGunner 🍀
  • Plinker
  • **
  • Posts: 228
  • Real Name: Rich
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #300 on: July 31, 2020, 10:50:06 AM »
Mine is on the fill whip, but it came empty and I'm not sure what the correct process to fill it is  :o
  • Cerro Gordo, Tn
Custom Shop 2400KT .177 Carbine "Bull Shot Stainless Steel"
Benjamin Discovery .177 Rifle tuned 12ft lb.
CZ T200 .177 10m Rifle
Hammerli 850 Air Magnum .22 Rifle
Crosman Titan .22 Low Power Rifle
Crosman 2240XL modified Pistol
and many plinker pistols.

Offline Rat Sniper (AKA: PaulT58)

  • Guns? What guns?
  • GTA Senior Contributor
  • ******
  • Posts: 8133
  • Ain't no wrong way to do the right thing!
  • Real Name: Paul
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #301 on: July 31, 2020, 11:09:59 AM »
Mine is on the fill whip, but it came empty and I'm not sure what the correct process to fill it is  :o

If you are referring to the in-line filter that typically comes with the YH, it should have come with some cotton filters that slip right into it.  My Xisico did not come with any filter on the fill whip, which is why I'm curious to figure out where it is, if there is one.

These are what the YH in-line fill whip filter use:

https://www.amazon.com/Xeroy-Amasstu-Pressure-Replacement-Compressor/dp/B07W82XTV4/ref=sr_1_8?dchild=1&keywords=replacement+cotton+filter+for+compressor&qid=1596204484&sr=8-8
  • Navarre, FL
PCP RIFLES:
AEA Challenger .30
Benjamin Cayden .22
Benjamin Marauder .22
FX Crown Continuum .22/.25
FX Dreamline Classic .25/.22
FX Dream-Tac Compact .177/.22
FX Maverick .22
Huben K1 .22

PCP PISTOLS:
Ataman AP16 .22
Benjamin Marauder Pistol .22
Hatsan AT-P1 .177

PCP AIR SUPPLY:
Hill EC-3000
Benjamin Recharge {For Sale}
Benjamin Traveler
Benjamin 90ci Buddy Tank

Offline n4spd

  • Plinker
  • **
  • Posts: 151
  • yes
  • Real Name: robert
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #302 on: July 31, 2020, 11:55:41 AM »
Mine (oil version) did not come with any in-line filter as well...

Mine is on the fill whip, but it came empty and I'm not sure what the correct process to fill it is  :o

If you are referring to the in-line filter that typically comes with the YH, it should have come with some cotton filters that slip right into it.  My Xisico did not come with any filter on the fill whip, which is why I'm curious to figure out where it is, if there is one.

These are what the YH in-line fill whip filter use:

https://www.amazon.com/Xeroy-Amasstu-Pressure-Replacement-Compressor/dp/B07W82XTV4/ref=sr_1_8?dchild=1&keywords=replacement+cotton+filter+for+compressor&qid=1596204484&sr=8-8
  • danville, ca

Offline WesBob

  • Vendors
  • GTA Senior Contributor
  • *
  • Posts: 2206
  • yes
    • AirgunArcheryfun
  • Real Name: Wes
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #303 on: July 31, 2020, 12:27:47 PM »
My apologies guys, it's inside the compressor, not a separate filter. I'll have to show on a diagram, but I'm on our only family holiday this summer til Monday so it'll have to be later. 🙂
  • Caronport , Saskatchewan, Canada
Artemis M11 .25 cal, Umarex Gauntlet .177, Beeman Qb78D 0.22 pcp, Beeman Chief, Crosman: 1322/2100 carbine,   Snow Peak: CP-1M/Chaser hybrid 0.22 bulk fill/pcp, Slavia 630 .177 Discovery Scopes

Website: Airgunarcheryfun.ca

Offline attk11

  • Shooter
  • *
  • Posts: 38
  • yes
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #304 on: August 05, 2020, 07:17:26 PM »
I posted this on Travis's "Xisico compressor video tutorials":

I just want to say that if you are in the fence about buying one of these compressors DO IT.

I received mine on July 22, from then till now (Aug 5) I filled my gauntlet 27 times.  Some things that I have learned while using this compressor is:
-When you order it get 1000-1500 pellets with it!  I shot a tin of 500 in 10 days, Wes has flat rate shipping so add a few tins to your order.
-When bleeding it: if you bleed it really slow like just barely crack the bleed valve, it may bleed your bottle as well.  I first noticed this when I had an inline filter and 36" extension line attached.  I then tried it with just the factory whip and notice that I would still drain the bottle if I bled it too slow.  I've noticed that if you bleed the first bit quicker then slow it down it wonít bleed the tank.
-Order a vibration hour meter.  I didnít know these existed until a guy posted on here.  The one I got has a sensitivity setting of HI or LOW, it needs to be set on HI for it to register on the hour meter.  The fan running will not rack up hours only the shake from the compressor.

Thanks Travis and Wes
  • BC

Offline attk11

  • Shooter
  • *
  • Posts: 38
  • yes
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #305 on: August 18, 2020, 05:47:07 PM »
I posted this on Travis's "Xisico compressor video tutorials":

I just want to say that if you are in the fence about buying one of these compressors DO IT.

I received mine on July 22, from then till now (Aug 5) I filled my gauntlet 27 times.  Some things that I have learned while using this compressor is:
-When you order it get 1000-1500 pellets with it!  I shot a tin of 500 in 10 days, Wes has flat rate shipping so add a few tins to your order.
-When bleeding it: if you bleed it really slow like just barely crack the bleed valve, it may bleed your bottle as well.  I first noticed this when I had an inline filter and 36" extension line attached.  I then tried it with just the factory whip and notice that I would still drain the bottle if I bled it too slow.  I've noticed that if you bleed the first bit quicker then slow it down it wonít bleed the tank.
-Order a vibration hour meter.  I didnít know these existed until a guy posted on here.  The one I got has a sensitivity setting of HI or LOW, it needs to be set on HI for it to register on the hour meter.  The fan running will not rack up hours only the shake from the compressor.

Thanks Travis and Wes

Just an update on the vibration hour meter.  It appears that it will only record run times of 1/10H (6 minutes) or longer.  When I tested it for 6 minutes it displays 0.1.  I have had 5 fills on my gun (3-4 minutes per fill) with it not recording the time (still showing 0.1).  Looking for a wired one that will record short run times.
  • BC

Offline Bluesman

  • Shooter
  • *
  • Posts: 24
  • yes
  • Real Name: Dino
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #306 on: August 18, 2020, 07:47:08 PM »
Just an update on the vibration hour meter.  It appears that it will only record run times of 1/10H (6 minutes) or longer.  When I tested it for 6 minutes it displays 0.1.  I have had 5 fills on my gun (3-4 minutes per fill) with it not recording the time (still showing 0.1).  Looking for a wired one that will record short run times.

I wondered whether the digital ones would do that. I haven't put one on mine yet but I'm leaning toward a mechanical one. I can't post external links. If you search "AIMILAR DC 6-80V Mechanical Hour Meter" on amazon, that's the one I'm thinking of.

  • Detroit, Michigan

Offline Rat Sniper (AKA: PaulT58)

  • Guns? What guns?
  • GTA Senior Contributor
  • ******
  • Posts: 8133
  • Ain't no wrong way to do the right thing!
  • Real Name: Paul
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #307 on: August 18, 2020, 08:21:05 PM »
I wonder is placement matters?  I have mine mounted on top of the compressor and it seem to be recording just fine.
« Last Edit: August 18, 2020, 08:24:31 PM by Rat Sniper (AKA: PaulT58) »
  • Navarre, FL
PCP RIFLES:
AEA Challenger .30
Benjamin Cayden .22
Benjamin Marauder .22
FX Crown Continuum .22/.25
FX Dreamline Classic .25/.22
FX Dream-Tac Compact .177/.22
FX Maverick .22
Huben K1 .22

PCP PISTOLS:
Ataman AP16 .22
Benjamin Marauder Pistol .22
Hatsan AT-P1 .177

PCP AIR SUPPLY:
Hill EC-3000
Benjamin Recharge {For Sale}
Benjamin Traveler
Benjamin 90ci Buddy Tank

Offline Bluesman

  • Shooter
  • *
  • Posts: 24
  • yes
  • Real Name: Dino
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #308 on: August 19, 2020, 11:09:16 AM »
I suspect what it does is:

Run 0:01-5:59 -> record 0.0
Run 6:00-11:59 -> record 0.1
Run 12:00-17:59 -> record 0.2

  • Detroit, Michigan

Offline miksatx

  • Sharp Shooter
  • ****
  • Posts: 912
  • yes
  • Real Name: Michael
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #309 on: August 19, 2020, 12:21:41 PM »
New problem breaker switch on fans working no start or stop lights illuminated. No go!
  • USA, TX, San Antonio

Online oldpro

  • GTA
  • Administrator
  • GTA Senior Contributor
  • *****
  • Posts: 10064
  • yes
  • Real Name: Travis
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #310 on: August 19, 2020, 01:22:29 PM »
New problem breaker switch on fans working no start or stop lights illuminated. No go!
Pull top look at connector to main board probably wiggled loose
  • Katy, Texas
Raptor mini 2 in .25
Huben k1 .22
Diana 56
FX tarantula
Walther R8
LCS SK-19

Offline miksatx

  • Sharp Shooter
  • ****
  • Posts: 912
  • yes
  • Real Name: Michael
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #311 on: August 20, 2020, 07:55:51 PM »
Compressor run when hooked  to 12v.
  • USA, TX, San Antonio

Offline gendoc

  • Lowest Bama AirgunHunter
  • GTA Senior Contributor
  • ******
  • Posts: 2884
  • bullfrogs with airguns....... fine eat'n !!
  • Real Name: john
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #312 on: August 20, 2020, 07:57:57 PM »
Compressor run when hooked  to 12v.

power supply has soiled the bed....... :o
  • swamp groceries rule !!
AF-DN Texan .457  >629FPE
SY-WP Dragon Claw  394FPE 
AEA Challenger SL .357  266FPE
AGT-DW Uragan .30 >98.4FPE
FX Impact-x mk2/pp .22  60FPE
FX Crown mk2 .22  51FPE
FX dream-tac compact/pp .22  33FPE
DAR gen-II .177  "death-grip tripod ratter"
Shoebox F10.....perfect !! 
Xisico CX3            
ATN X-sight 4K pro
Sightmark Photon XT
Sideshot gopro H7-blk EV 12/1.8
Tactacam 5.0/FTS
FX radar


USA, Alabama, Lowest

Online oldpro

  • GTA
  • Administrator
  • GTA Senior Contributor
  • *****
  • Posts: 10064
  • yes
  • Real Name: Travis
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #313 on: August 20, 2020, 08:07:19 PM »
Sounds like inverter issue. Im not sure but I bet there a fuse inside that thing.
  • Katy, Texas
Raptor mini 2 in .25
Huben k1 .22
Diana 56
FX tarantula
Walther R8
LCS SK-19

Offline miksatx

  • Sharp Shooter
  • ****
  • Posts: 912
  • yes
  • Real Name: Michael
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #314 on: August 21, 2020, 12:22:18 PM »
My guess circuit board, 8 pin connector for those 2 switches. With fan switch on I get 12.23v on my multi meter on the large red wires on the circuit board. Still no lights on start and stop still no runnie lol.
  • USA, TX, San Antonio

Offline miksatx

  • Sharp Shooter
  • ****
  • Posts: 912
  • yes
  • Real Name: Michael
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #315 on: August 25, 2020, 03:41:30 PM »

Sounds like inverter issue. Im not sure but I bet there a fuse inside that thing.
Has some thing for if it struck by lightening bolt. Fuse not seen one any where. Wes or Travis could you check with one xisico tech. See if they had this problem before. Dead compressor.
  • USA, TX, San Antonio

Online oldpro

  • GTA
  • Administrator
  • GTA Senior Contributor
  • *****
  • Posts: 10064
  • yes
  • Real Name: Travis
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #316 on: August 25, 2020, 09:59:49 PM »

Sounds like inverter issue. Im not sure but I bet there a fuse inside that thing.
Has some thing for if it struck by lightening bolt. Fuse not seen one any where. Wes or Travis could you check with one xisico tech. See if they had this problem before. Dead compressor.
Confused.... You stated it runs from 12v source or is that not correct?
  • Katy, Texas
Raptor mini 2 in .25
Huben k1 .22
Diana 56
FX tarantula
Walther R8
LCS SK-19

Offline miksatx

  • Sharp Shooter
  • ****
  • Posts: 912
  • yes
  • Real Name: Michael
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #317 on: August 26, 2020, 05:45:29 AM »

Sounds like inverter issue. Im not sure but I bet there a fuse inside that thing.
Has some thing for if it struck by lightening bolt. Fuse not seen one any where. Wes or Travis could you check with one xisico tech. See if they had this problem before. Dead compressor.
Confused.... You stated it runs from 12v source or is that not correct?
Yes the compressor motor will run if I connect 12v directly to the motor harness it runs. Connect all the wires like they are supposed to be. Only the fans run when blue breaker switch is flipped on still no power lights come on for the start and stop switch. And pushing the start button does nothing.
  • USA, TX, San Antonio

Online avator

  • Global Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 32425
  • Happiness is a warm airgun... -Lennon Modded-
  • Real Name: Bill
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #318 on: August 26, 2020, 06:34:08 AM »
Does that not narrow the issue to the power supply or am I missing something?
  • From deep within the Rabbit Hole, Alabama

Offline miksatx

  • Sharp Shooter
  • ****
  • Posts: 912
  • yes
  • Real Name: Michael
Re: Xisico JTS GX-E-CS3 Compressor In Stock
« Reply #319 on: August 26, 2020, 07:37:56 AM »
Does that not narrow the issue to the power supply or am I missing something?
No not at all. I'm using the same 12v power supply that came with the compressor. Just disconnecting the main compressor wiring and than connecting the 12v jumper wires to the compressor electric motor harness.
  • USA, TX, San Antonio