GTA
All Springer/NP/PCP Air Gun Discussion General => American/U.S. Air Gun Gates => Topic started by: ShockwaveTim on January 26, 2021, 04:11:26 PM
-
Replaced my trigger with the GRT-III. Had no free play and was a hair trigger. Cleaned up the pivot point on the intermediate lever and fine tuned the adjustments. Shoots good now.
While in there wawwqqwwwI discovered the bear trap tab was too long. I filed at least 1/16 of an qeeqqq aqqwqqw inch off to make it clear the pin. Now just need to shoot it to make sure reflex sight is qstill on. W
-
What gun did you install the GRTIII trigger. I seven guns with GRT triggers.
-
Crosman Shockwave NP2 in a Venom synth stock.