Let me apologize in advance if this topic is off topic.Since getting my new MRod, I have been in a constant cycle of adding custom parts, tweaking setup, and zeroing. One thing that has proven to be problematic is after ever time I remove the scope with rings/mount, I always end up having to make large adjustments to windage to pull right or left. This time, I figured something is out of wack, having to adjust over 148 clicks / 37 MOA to the right. I have never had to do this before with any rifle. What could be going on?Mrod is gen 2: 25 CAL.Scope is UTG 4-16 x 54, 1/4 moa.Rings are BKL dovetail high rise 30mm.Target: 75 yards down range. Paper.
Thread moved to The Darkside...
do your tweaks always involve removing and reinstalling the scope?
What are some of the tweaks that have led to needing the biggest adjustments?
Does the barrel look to be straight down the length of the air tube? Has the shroud position moved, such that the barrel band needed re-centering?
CLIPPING most likely
I'd remove all the grommets and install the oem parts, at least for a test.
How does it shoot with the shroud, baffles, and shroud spacer removed?
Quote from: FuzzyGrub on December 04, 2021, 07:18:04 PMHow does it shoot with the shroud, baffles, and shroud spacer removed? Loud, and my shots are way off the target once removed. Rifle is bedded, and shots are still spraying everywhere. Inspected all parts of shroud, and they show no signs of damage, and the shroud appears to be straight.
The barrel get damaged in the process?
how far does the bedding go?