Thank you to our advertisers!







Author Topic: I need some Crosman parts.  (Read 632 times))

Offline bantam5s

  • They might sound like a lot of work till you realize you only need 3-4 pumps for plinking.
  • GTA Senior Contributor
  • ******
  • Posts: 7727
  • yes
  • Real Name: David
I need some Crosman parts.
« on: June 14, 2021, 09:06:40 PM »
Can you even get parts from Crosman right now ?

If so, I need the part # for the 2260 wood stock , trigger housing,  and stock screw lug.
  • USA CA Arbuckle
PCP? I never touched the stuff !
No, it's a type of airgun !
Oh!, no I don't have one of those.

Offline Ronno6

  • GTA Senior Contributor
  • ******
  • Posts: 2834
  • yes
  • Real Name: Ron
Re: I need some Crosman parts.
« Reply #1 on: June 14, 2021, 09:11:25 PM »
I just received a parts order today....placed last week.
(But, they like me.... ;) )
  • USA, Stone County, MS
You can lead a man to water, but you can't keep him from urinating in it.

Online Spooner

  • Sharp Shooter
  • ****
  • Posts: 921
  • yes
  • Real Name: Robert
Re: I need some Crosman parts.
« Reply #2 on: June 14, 2021, 09:15:07 PM »
I can't help you with the part numbers but I have also ordered parts for my 1077 and the 13xx guns recently. I even ordered two camo stocks from the custom  shop. Just give them a call once you have the part numbers and if they have them, you can get them.
  • Ohio

Offline Ronno6

  • GTA Senior Contributor
  • ******
  • Posts: 2834
  • yes
  • Real Name: Ron
Re: I need some Crosman parts.
« Reply #3 on: June 14, 2021, 09:22:50 PM »
This orta help.....
  • USA, Stone County, MS
You can lead a man to water, but you can't keep him from urinating in it.

Offline bantam5s

  • They might sound like a lot of work till you realize you only need 3-4 pumps for plinking.
  • GTA Senior Contributor
  • ******
  • Posts: 7727
  • yes
  • Real Name: David
Re: I need some Crosman parts.
« Reply #4 on: June 15, 2021, 12:54:47 AM »
This orta help.....
Thanks.
Hopefully they have 'em, It's been a while since I last ordered parts from them and heard the kung-flu had interfered with getting parts.
  • USA CA Arbuckle
PCP? I never touched the stuff !
No, it's a type of airgun !
Oh!, no I don't have one of those.

Offline jkingrph

  • Marksman
  • ***
  • Posts: 314
  • yes
  • Real Name: Jeff
Re: I need some Crosman parts.
« Reply #5 on: June 15, 2021, 02:20:11 PM »
I have ordered quite a few parts over the last few months with no problems.  I had to call the orders in and sometimes had to be on hold for a bit before talking to a rep.
  • USA, TX, Jacksonville

Offline bantam5s

  • They might sound like a lot of work till you realize you only need 3-4 pumps for plinking.
  • GTA Senior Contributor
  • ******
  • Posts: 7727
  • yes
  • Real Name: David
Re: I need some Crosman parts.
« Reply #6 on: June 15, 2021, 06:52:48 PM »
I have ordered quite a few parts over the last few months with no problems.  I had to call the orders in and sometimes had to be on hold for a bit before talking to a rep.
That's how it's been for me every time before,  so I suppose all is normal.
  • USA CA Arbuckle
PCP? I never touched the stuff !
No, it's a type of airgun !
Oh!, no I don't have one of those.

Online Back_Roads

  • I Got A 15 Pump BB Gun :) BB Guns Got Much More Complicated :)
  • GTA Senior Contributor
  • ******
  • Posts: 10770
  • 1st Edition Crosman 760 Pump Master
    • Back_Roads Airguning
  • Real Name: James Seiler
Re: I need some Crosman parts.
« Reply #7 on: June 15, 2021, 08:18:06 PM »
 Me not much time during business hours to call so rarely order from Crosman, worth the bit extra to me to by 2nd hand or from small airgun dealers.
  • Wisconsin Collins Hunters Paradise" There's a Sign in Town to Prove It :)

Offline bantam5s

  • They might sound like a lot of work till you realize you only need 3-4 pumps for plinking.
  • GTA Senior Contributor
  • ******
  • Posts: 7727
  • yes
  • Real Name: David
Re: I need some Crosman parts.
« Reply #8 on: June 15, 2021, 09:08:14 PM »
Me not much time during business hours to call so rarely order from Crosman, worth the bit extra to me to by 2nd hand or from small airgun dealers.
Everywhere else I found the 2260 stock it was about $100, iirc it cost a fraction of that from Crosman the last time I bought one.
Other than that, I have bought a part or two from other places.
  • USA CA Arbuckle
PCP? I never touched the stuff !
No, it's a type of airgun !
Oh!, no I don't have one of those.

Offline bantam5s

  • They might sound like a lot of work till you realize you only need 3-4 pumps for plinking.
  • GTA Senior Contributor
  • ******
  • Posts: 7727
  • yes
  • Real Name: David
Re: I need some Crosman parts.
« Reply #9 on: June 15, 2021, 09:17:04 PM »
Thinking about it now, I'm probably going to go with a marauder trigger group and make a traditional blued steel trigger guard.
I'll just order that complete unit from a dealer, about the most affordable way to eliminate the plastic trigger group.


I'm redoing the " American boy " 1300kt rifle BTW, it didn't look too bad in this picture a couple years ago but there were things that just didn't show up.


i had some issues with stock anchoring because I didn't know about that stock screw lug, and I want to eliminate as many plastic parts as possible.

I also now have a left handed breech / bolt to use, and have since gained the skill / confidence do a proper job with the stock this time around.
Well my skill is definitely better than it used to be at least.




« Last Edit: June 15, 2021, 09:37:08 PM by bantam5s »
  • USA CA Arbuckle
PCP? I never touched the stuff !
No, it's a type of airgun !
Oh!, no I don't have one of those.

Offline bantam5s

  • They might sound like a lot of work till you realize you only need 3-4 pumps for plinking.
  • GTA Senior Contributor
  • ******
  • Posts: 7727
  • yes
  • Real Name: David
Re: I need some Crosman parts.
« Reply #10 on: June 28, 2021, 01:37:39 PM »
Looks like the numbers in that parts diagram are outdated, they emailed me a current one to look at.
  • USA CA Arbuckle
PCP? I never touched the stuff !
No, it's a type of airgun !
Oh!, no I don't have one of those.

Offline bantam5s

  • They might sound like a lot of work till you realize you only need 3-4 pumps for plinking.
  • GTA Senior Contributor
  • ******
  • Posts: 7727
  • yes
  • Real Name: David
Re: I need some Crosman parts.
« Reply #11 on: June 28, 2021, 02:08:32 PM »
The email didn't go through,  but I found another diagram.
The # was wrong again,  but this particular employee found the right number for me.


The shipping was only $4 too  :o did they go back to the universal $4 shipping for parts ?
  • USA CA Arbuckle
PCP? I never touched the stuff !
No, it's a type of airgun !
Oh!, no I don't have one of those.

Offline Ronno6

  • GTA Senior Contributor
  • ******
  • Posts: 2834
  • yes
  • Real Name: Ron
Re: I need some Crosman parts.
« Reply #12 on: June 28, 2021, 02:52:05 PM »


The shipping was only $4 too  :o did they go back to the universal $4 shipping for parts ?

That's what I see most of the time, unless I order barrels, etc....
  • USA, Stone County, MS
You can lead a man to water, but you can't keep him from urinating in it.

Offline bantam5s

  • They might sound like a lot of work till you realize you only need 3-4 pumps for plinking.
  • GTA Senior Contributor
  • ******
  • Posts: 7727
  • yes
  • Real Name: David
Re: I need some Crosman parts.
« Reply #13 on: June 28, 2021, 03:25:33 PM »


The shipping was only $4 too  :o did they go back to the universal $4 shipping for parts ?

That's what I see most of the time, unless I order barrels, etc....
Interesting.
I remember the higher shipping cost when I ordered a few barrels from them, but don't remember what it was when I ordered the 2260 stock last time.
  • USA CA Arbuckle
PCP? I never touched the stuff !
No, it's a type of airgun !
Oh!, no I don't have one of those.

Offline Lude

  • Shooter
  • *
  • Posts: 24
  • yes
  • Real Name: Andrew
Re: I need some Crosman parts.
« Reply #14 on: July 09, 2021, 03:28:49 PM »
New here so not sure if itís common knowledge. But In Canada any ways. You Can order Parts directly from crosman.ca. Shows the price part number and stock. And convent online orders. No calling in. I would of thought it was just as easy in the stateís but maybe not? 
  • Canada, Halifax

Offline jkingrph

  • Marksman
  • ***
  • Posts: 314
  • yes
  • Real Name: Jeff
Re: I need some Crosman parts.
« Reply #15 on: July 09, 2021, 06:16:36 PM »
I just ordered  3 sight posts for a 2300s,  and got two and a roll pin for somthing else.  I tried emailing customer service but no answer, so called the yesterday morning.  I was fourth in the waiting que, and only took about a 5 minute wait. The lady who answered said they had a new girl in parts, and would take care of it and ship another out that same day.

Honestly It would be easier to be able to order online, You have to look up the part number to order anyway, so most of us are online to do that.
  • USA, TX, Jacksonville

Offline bantam5s

  • They might sound like a lot of work till you realize you only need 3-4 pumps for plinking.
  • GTA Senior Contributor
  • ******
  • Posts: 7727
  • yes
  • Real Name: David
Re: I need some Crosman parts.
« Reply #16 on: July 10, 2021, 01:20:04 AM »
New here so not sure if itís common knowledge. But In Canada any ways. You Can order Parts directly from crosman.ca. Shows the price part number and stock. And convent online orders. No calling in. I would of thought it was just as easy in the stateís but maybe not?
That might be easier, but it's a pleasant change to be able to talk to a pleasant person and receive good customer service.

Plus this is about the only time I can think of where I find myself put on hold for a call I was excited to make, at the end of the phone call you receive an order number for airgun parts that you get to wait for like a kid on Christmas.

Name one other call you don't dread making when you know you'll probably be put on hold ?
  • USA CA Arbuckle
PCP? I never touched the stuff !
No, it's a type of airgun !
Oh!, no I don't have one of those.

Offline Ronno6

  • GTA Senior Contributor
  • ******
  • Posts: 2834
  • yes
  • Real Name: Ron
Re: I need some Crosman parts.
« Reply #17 on: November 29, 2021, 03:19:53 PM »

That might be easier, but it's a pleasant change to be able to talk to a pleasant person and receive good customer service.

Plus this is about the only time I can think of where I find myself put on hold for a call I was excited to make, at the end of the phone call you receive an order number for airgun parts that you get to wait for like a kid on Christmas.

Name one other call you don't dread making when you know you'll probably be put on hold ?

You can't beat Crosman or Daisy for their customer Service people!

I called MyPillow.com customer service the other day, and was told that my wait time was approximately 1hour 30 minutes !!!
I hung up in less than 5 seconds, laughing all the way!
  • USA, Stone County, MS
You can lead a man to water, but you can't keep him from urinating in it.

Offline bantam5s

  • They might sound like a lot of work till you realize you only need 3-4 pumps for plinking.
  • GTA Senior Contributor
  • ******
  • Posts: 7727
  • yes
  • Real Name: David
Re: I need some Crosman parts.
« Reply #18 on: November 30, 2021, 03:20:48 PM »

That might be easier, but it's a pleasant change to be able to talk to a pleasant person and receive good customer service.

Plus this is about the only time I can think of where I find myself put on hold for a call I was excited to make, at the end of the phone call you receive an order number for airgun parts that you get to wait for like a kid on Christmas.

Name one other call you don't dread making when you know you'll probably be put on hold ?

You can't beat Crosman or Daisy for their customer Service people!

I called MyPillow.com customer service the other day, and was told that my wait time was approximately 1hour 30 minutes !!!
I hung up in less than 5 seconds, laughing all the way!
I love their pillows and just purchased 4 this month , but haven't needed to call their customer service yet thankfully.
  • USA CA Arbuckle
PCP? I never touched the stuff !
No, it's a type of airgun !
Oh!, no I don't have one of those.

Offline Ronno6

  • GTA Senior Contributor
  • ******
  • Posts: 2834
  • yes
  • Real Name: Ron
Re: I need some Crosman parts.
« Reply #19 on: November 30, 2021, 07:06:42 PM »
We opened them up and removed some stuffing....enough to make a 3rd pillow !
  • USA, Stone County, MS
You can lead a man to water, but you can't keep him from urinating in it.