All Springer/NP/PCP Air Gun Discussion General > Air Archery
Sam Yang 909 with air bolts
bduares:
I just made some o-ring nocks. Seem to work as well as the commercial ones. They make a satisfying "thunk" sound when I pull them from the barrel of my .357 AEA Challenger so they seal nice and tight. I can print as many as needed. I know which o-ring size makes them fit a .357/9mm perfectly, and a little playing around with larger o-rings should allow the same nock to be used in .45 and larger as well.
This is a standard 8mm shaft arrow that runs $25 per dozen on Amazon. With my nock in place with and without the o-ring to size it to the .357 barrel.
Nomadic Pirate:
Well Pyramid has the .45 in stock
Navigation
[0] Message Index
[*] Previous page
Go to full version