GTA
Target Shooting Matches, Discussion & Events => 100 Yard Match => Topic started by: rsterne on April 02, 2022, 12:53:38 AM
-
Welcome to the 2nd 100 yard Monthly Match of 2022. This match will run until April 30. The rules and targets can be found at:
http://www.gatewaytoairguns.org/GTA/index.php?topic=125759.0 (http://www.gatewaytoairguns.org/GTA/index.php?topic=125759.0)
Post a scan or picture of the target during the calendar month the Match is being run.
If you are not a Member of the NUAH Club and would like to join or would like to upgrade your Division standing, your submitted target can be used for that also.
If you want to apply for NUAH Membership or a Division Upgrade, you must post a thread with your target, and other information required, in the Membership Gate:
https://www.gatewaytoairguns.org/GTA/index.php?board=205.0 (https://www.gatewaytoairguns.org/GTA/index.php?board=205.0)
All the rules for becoming a Member of the NUAH Club must be followed. They can be found at:
https://www.gatewaytoairguns.org/GTA/index.php?topic=100865.0 (https://www.gatewaytoairguns.org/GTA/index.php?topic=100865.0)
Please include with your Match submission:
Name
NUAH Division
Airgun
Caliber
Sights
Pellet/Bullet
Position
Score and Group Size
Any other info you would like to share (weather,pictures, etc)
You may enter once for each Caliber shot. Results will be posted for Overall and within your Division after the end of the month. Have fun and enjoy the match.
RESULTS....
Overall
Montana_Airgunner.... Member.... .30 cal.... 50/50, 1X.... 1.54"
FastJ.... Master.... .22 cal.... 48/50, 1X.... 2.13"
Firewalker.... Sharpshooter.... .25 cal.... 47/50.... 1.87"
FastJ.... Master.... .25 cal.... 47/50.... 2.5"
ER00z.... Member.... .22 cal.... 42/50, 1X.... 3.50"
JuryRigger.... Member.... .22 cal.... 40/50.... 3.99"
ER00z.... Member.... .177 cal.... 38/50.... 3.18"
Master
FastJ.... Master.... .22 cal.... 48/50, 1X.... 2.13"
FastJ.... Master.... .25 cal.... 47/50.... 2.5"
Sharpshooter
Firewalker.... Sharpshooter.... .25 cal.... 47/50.... 1.87"
Member
Montana_Airgunner.... Member.... .30 cal.... 50/50, 1X.... 1.54".... Upgraded to Sharpshooter for next month, congratulations!
ER00z.... Member.... .22 cal.... 42/50, 1X.... 3.50"
JuryRigger.... Member.... .22 cal.... 40/50.... 3.99"
ER00z.... Member.... .177 cal.... 38/50.... 3.18"
Thanks to all who competed.... See you next month!....
Bob
-
It has been a long time since I last posted but life has been crazy! I also got a new toy and it is the FX Impact M3 in .30cal. This is the sniper edition of the model with 700mm barrel and 580cc bottle.
I have been shooting with it for some times now and it seems that the gun needs to be "seasoned" so does the barrel. I have had a significant improvement in the ES and STD readings after getting around 5 tins of pellets through it.
Hoping some others will get a shot tomorrow or today to get their cards submitted.
Shooting Date: 4/1/22
Shooter: Montana_Airgunner Division = not classifed (Member)
Distance: Prickly pear shooting range 100 yards
Gun: RFX IMpact M3 .30
Optics: Bushnell Match Pro 6-24x50
Ammo: FX 44.75gr .30cal
Wind: 4mph said the weather broadcast but it was barely breezing at all.
Group:50/50; 1X via BallistticX Group = 1.54"
Position: Bench Rest seated, UTG Recon 360 bipod and fist on the back
I shot around 15 targets that day and I got a couple almost as good ones but this was the best for the day. I got tighter group that wasn't hitting the bulls eye but I have attached it also as a reference material.
-
Way to go AJ. Good to see someone shooting these again. Maybe you can entice more to join in. I've really slacked off in the airguning department. Hope I get the fever again soon.
Fuss
-
Bob told i should post last macth.
Now i do. Hope others join in.
This time no any chronos or any
Tuning. Just go woods fast sight in and shoot 2 scores.
Build quick wobbly table (terrible)
Temp 3c
Shooting Date: 4/3/22
Shooter: Jari - ( FastJ )
Distance: back yard woods 100 yd
Gun: Impact .25
Optics: Vector 32x
Ammo: Atp .25 49.5gr
Wind: mixed. Quite low
Group: 1.73” 47 x1 - Second Target Chosen - 47/50-0X, 2.5"
Position: Bench Rest seated sand bag
Division (not stated) = Master
-
B
And yes. Those 3 was same hole when sigh in..
-
AJ, please submit your target for NUAH memberships, you will qualify as in the Sharpshooter Division....
Jari, your tightest group is on the target with the lower score (46/50) we count DOWN when a line is touched for the Match scores.... For the match, you would be better off submitting the other target, with the 2.5" group, as it scores 47/50.... Since we only allow ONE target to be submitted per caliber, please make your choice, and in future only post the one target you are submitting....
Bob
-
AJ, please submit your target for NUAH memberships, you will qualify as in the Sharpshooter Division....
Jari, your tightest group is on the target with the lower score (46/50) we count DOWN when a line is touched for the Match scores.... For the match, you would be better off submitting the other target, with the 2.5" group, as it scores 47/50.... Since we only allow ONE target to be submitted per caliber, please make your choice, and in future only post the one target you are submitting....
Bob
10-4
Just try boost conversation. Quite quiet here..
-
You're gettin out there and gettin' er done Jari. More than I can say for my old lazy butt ;-)
-
Awaiting acceptance to the NUAH Club but here it is anyway.
David Gustafson - Firewalker
Hopefully Sharpshooter
DAR Gen 3
.25
3x9x32 BugBuster
JSB Exact King, 25.39gr
Sitting, bag rest
48/50 Note count lower score on line cut - 47/50, 1-7/8" CTC
45F, sunny, wind from the south at 5-8 MPH
-
Nice David
Btw. Check your printer scale settings. You give unnecessary handicap for others now
-
Good shooting David, your score will be even better once you get the target to the right scale. Looks like your eight ring is closer to 3.5" than the correct 4" eight ring.
-
My printer will clip the outer ring if I go to 100%, will that still be it admissible target?
-
As long as your eight ring measures 4 inches you should be good to go! You could try a few test runs on say 97%, 98% etc to get the 8 ring to the 4 inch mark if needed.
-
As long as your eight ring measures 4 inches you should be good to go! You could try a few test runs on say 97%, 98% etc to get the 8 ring to the 4 inch mark if needed.
Yes, I have no problem scaling the target it's just that the very outer ring gets clipped if I go to a 4 inch, 4 MOA, center bull.
-
If your shot goes to the outermost ring of the paper, it's probably not worth submitting anyway, so I wouldn't worry about that. Weird how that works with your printer. Mine clips off the bottom of the target down where it says "Range....Group"
As long as that eight ring measures 4" on the ruler, your good.
Every printer is different
-
If your shot goes to the outermost ring of the paper, it's probably not worth submitting anyway, so I wouldn't worry about that. Weird how that works with your printer. Mine clips off the bottom of the target down where it says "Range....Group"
As long as that eight ring measures 4" on the ruler, your good.
Every printer is different
I can print nearly out to the side edges in WORD but gets weird on .PDF's. The drivers are as 'updated' as possible so there's no more I can do. I will print some at work and see if I can scale them up a little.
Thank you all for your feedback, I hope to lob some .22's today.
-
Firewalker - Your target as submitted scores 47/50, not 48, because the shot at 5 o'clock cutting the 9 ring scores 8 (we score down, not up on a line touch).... If the 4 MOA ( 8 ) ring measures 4", the entire target fits easily on 8.5 x 11 paper, with 1/4" on either side.... You may have to print without margins, and try adjusting the percentage until the ring measures exactly 4.00"....
I scored you as a Sharpshooter, per your request and your NUAH qualification submission.... Congratulations, and welcome to NUAH!....
Bob
-
Firewalker - Your target as submitted scores 47/50, not 48, because the shot at 5 o'clock cutting the 9 ring scores 8 (we score down, not up on a line touch).... If the 4 MOA (8) ring measures 4", the entire target fits easily on 8.5 x 11 paper, with 1/4" on either side.... You may have to print without margins, and try adjusting the percentage until the ring measures exactly 4.00"....
I scored you as a Sharpshooter, per your request and your NUAH qualification submission.... Congratulations, and welcome to NUAH!....
Bob
WHOOT! Thanks Bob! ;D
-
4/12/2022
E.Z.R. aka "Zack" (ER00z)
Unlisted Division - (Member)
Weihrauch HW97K Synthetic stock
Burris Fullfield E1 4.5-14X42 (Long Range MOA recticle)
.177, H&N FTT 8.6gr (4.52mm)
Benched-seated
Score 38/50, Group size 3-3/16"
Was raining last night into the early morning, but around 7am it was absolutely calm (wind 0-5mph). Grabbed a target, gun, pellets and sent 5 down to see what I'd get. The first "cold bore" shot went low and left (6-ring). The next three landed in the 9 and 8 rings, the last went low and righ (6-ring). Figured I'd submit as it's my best results so far with a .177. Shot from my deck to the post out back, lasered at 105 yards. Used 9 power on the scope for all my shots.
-
Couldn't post all the photos, but here's the gun, range (yesterday's photos) and a closer look at today's target.
-
Good shooting Zack! :D
That didn't take long ;)
Jesse
-
Good shooting Zack! :D
That didn't take long ;)
Jesse
Thanks!
Have to sort out some things with the D54, then I hope to post higher scores in the .22 caliber class ;) ;D 8)
-
My .22 submission
Shooting Date: 4/13/22
Shooter: Jari ( FastJ )
Distance: 100 yd
Gun: Altaros M24
Optics: Vector 32x
Ammo: Atp .22 31gr
Wind: 0-1
Group: 2.12” 48 x1
Position: Bench Rest seated sand bag
Division (not stated) = Master
Was perfect day for shooting !
Getting there with new M24
-
My .22 submission
Shooting Date: 4/13/22
Shooter: Jari
Distance: 100 yd
Gun: Altaros M24
Optics: Vector 32x
Ammo: Atp .22 31gr
Wind: 0-1
Group: 2.12” 48 x1
Position: Bench Rest seated sand bag
Was perfect day for shooting !
Getting there with new M24
Great job Jari!
-
AJ, please submit your target for NUAH memberships, you will qualify as in the Sharpshooter Division....
Jari, your tightest group is on the target with the lower score (46/50) we count DOWN when a line is touched for the Match scores.... For the match, you would be better off submitting the other target, with the 2.5" group, as it scores 47/50.... Since we only allow ONE target to be submitted per caliber, please make your choice, and in future only post the one target you are submitting....
Bob
Go for 47
-
My .22 submission
Shooting Date: 4/13/22
Shooter: Jari
Distance: 100 yd
Gun: Altaros M24
Optics: Vector 32x
Ammo: Atp .22 31gr
Wind: 0-1
Group: 2.12” 48 x1
Position: Bench Rest seated sand bag
Was perfect day for shooting !
Getting there with new M24
Here picture from setup. Using impact moderator and Altaros external regulator
-
Just a reminder, please state your NUAH Division in your entry so I don't have to look it up....
Also, please use your "handle" instead of your name, as that is how we post the results....
Bob
-
My .22 submission
Shooting Date: 4/13/22
Shooter: Jari
Distance: 100 yd
Gun: Altaros M24
Optics: Vector 32x
Ammo: Atp .22 31gr
Wind: 0-1
Group: 2.12” 48 x1
Position: Bench Rest seated sand bag
Was perfect day for shooting !
Getting there with new M24
Here picture from setup. Using impact moderator and Altaros external regulator
FastJ
How are you liking the M24? I have been eyeing that one for a long time, but availability was not there :D Is it picky with the projectiles used?
-
My .22 submission
Shooting Date: 4/13/22
Shooter: Jari
Distance: 100 yd
Gun: Altaros M24
Optics: Vector 32x
Ammo: Atp .22 31gr
Wind: 0-1
Group: 2.12” 48 x1
Position: Bench Rest seated sand bag
Was perfect day for shooting !
Getting there with new M24
Here picture from setup. Using impact moderator and Altaros external regulator
FastJ
How are you liking the M24? I have been eyeing that one for a long time, but availability was not there :D Is it picky with the projectiles used?
I like it. Bolt system is cool. So close to real deal.
Cant say picky or not. Have shot it under 200 rounds and only those Atp 31gr.
Its with lw 17.7” barrel so would shoot Jsb redesign like laser also.
I just add cheek ricer pad for it and going out testing now
-
Finally have a submission good enough to enter-never know when I'll have time to shoot again; so entering this one:
Date Shot: 4-16-2022
NUAH Division Class: Member
Shot by: JuryRigger
Distance: 104-ish yards (Google Earth 103 yards; plus two more paced off to be sure-can/will provide the Earth-view snip to moderator upon request)
Gun: .22 Diana 350 N-Tec
Optics: UTG TrueHunter 3-9x40
Ammo: 18-grain H&N Barracuda
Wind: 9'o'clock 5-8 MPH (Maybe more-hard to tell)
Group: 3.99", score 39/50 (Mayyybe 40/50-one shot too close to call for sure)
Position: Seated on stool; gun rested on sticks
A bit windy; but I've had so few opportunities to shoot that I grabbed it while I had it-had to hold on about the left side of the target to account for the wind; and a possible zero error-but didn't do too badly :D:
(https://www.gatewaytoairguns.org/GTA/MGalleryItem.php?id=8532)
(https://www.gatewaytoairguns.org/GTA/MGalleryItem.php?id=8533)
(https://www.gatewaytoairguns.org/GTA/MGalleryItem.php?id=8534)
(https://www.gatewaytoairguns.org/GTA/MGalleryItem.php?id=8535)
Jesse
-
I'll give you that one just inside the 9 ring, for a score of 40/50.... ;)
Bob
-
I'll give you that one just inside the 9 ring, for a score of 40/50.... ;)
Bob
Thanks Bob! It was soooo close; I thought the little lead smudge looked like it was safely inside the ring-but sooo close I didn't want to call it wrong... :D
Jesse
-
JurryRigger, Great shooting!!!
Those Diana 350's are a handful, but you're doing excellent with yours. I'm hoping in the next few weeks the weather becomes more agreeable for distance shooting, as of late it's been gusty around these parts. Getting 6"+ of drift with pellets so far, and wind hasn't been consistent enough for simple hold over. All part of the "game" I guess.
At any rate, great shooting!
-
My .22 submission
Shooting Date: 4/13/22
Shooter: Jari
Distance: 100 yd
Gun: Altaros M24
Optics: Vector 32x
Ammo: Atp .22 31gr
Wind: 0-1
Group: 2.12” 48 x1
Position: Bench Rest seated sand bag
Was perfect day for shooting !
Getting there with new M24
Here picture from setup. Using impact moderator and Altaros external regulator
FastJ
How are you liking the M24? I have been eyeing that one for a long time, but availability was not there :D Is it picky with the projectiles used?
I like it. Bolt system is cool. So close to real deal.
Cant say picky or not. Have shot it under 200 rounds and only those Atp 31gr.
Its with lw 17.7” barrel so would shoot Jsb redesign like laser also.
I just add cheek ricer pad for it and going out testing now
Could you open a forum post about the gun? I am very keen on knowing more about this setup. Would also like to know more on the experiences you are having with it.
-
My .22 submission
Shooting Date: 4/13/22
Shooter: Jari
Distance: 100 yd
Gun: Altaros M24
Optics: Vector 32x
Ammo: Atp .22 31gr
Wind: 0-1
Group: 2.12” 48 x1
Position: Bench Rest seated sand bag
Was perfect day for shooting !
Getting there with new M24
Here picture from setup. Using impact moderator and Altaros external regulator
FastJ
How are you liking the M24? I have been eyeing that one for a long time, but availability was not there :D Is it picky with the projectiles used?
I like it. Bolt system is cool. So close to real deal.
Cant say picky or not. Have shot it under 200 rounds and only those Atp 31gr.
Its with lw 17.7” barrel so would shoot Jsb redesign like laser also.
I just add cheek ricer pad for it and going out testing now
Could you open a forum post about the gun? I am very keen on knowing more about this setup. Would also like to know more on the experiences you are having with it.
Have write some experience from ot there
[url]https://www.gatewaytoairguns.org/GTA/index.php?topic=154434.msg156305178#msg156305178]https://www.gatewaytoairguns.org/GTA/index.php?topic=154434.msg156305178#msg156305178] [url]https://www.gatewaytoairguns.org/GTA/index.php?topic=154434.msg156305178#msg156305178 (https://www.gatewaytoairguns.org/GTA/index.php?topic=154434.msg156305178#msg156305178)
Last testind did no go well. My usual location was occupied and got so mixed wind second place. Go tomorrow again play with it.
There is something different what i have to learn with it. Maybe same deal what messed me with War Cobra. There was really heavy hammer weight. That will make shooting difficult because when fire it move different. Like bigger caliber firearms but mirrored recoil. Maybe not case with m24 but just wild quess.
I will add something to shooting table where push from shoulder to bipod. Then i know
-
4/20/2022
ER00z a.k.a. "Zack"
NUAH Division-Member
100 yards (105y via range finder)
Diana 54 Air King Pro
Optic: Pinty 4-16X40AO
.22 caliber Air Arms 16gr pellets
Wind: 0-3mph
Score: 42/50, 1X, Group size: 3.5"
Position: Benched/seated
-
You're cookin' now Zack! :D
Jesse
-
You're cookin' now Zack! :D
Jesse
Thank you :D
Still have a couple things to sort out, but I'm happy with the performance at distance for a springer. Those two high shots were from inconsistent cheek weld (I believe), that caused the gun to "jump" a little. Either working on consistency or weighing the fore end of the stock should resolve that... ;D
Still not as impressive as the group you shot with the 350 N-Tec, those take much more effort/dedication for consistency, in my opinion ;)