GTA

All Springer/NP/PCP Air Gun Discussion General => "Bob and Lloyds Workshop" => Topic started by: labyukv on October 20, 2021, 04:49:53 PM

Title: Swiss Arms the spring rebuild with the Crasman staff
Post by: labyukv on October 20, 2021, 04:49:53 PM

Hi everyone,
Another rebuild - Swiss Arms TG1. The Top one - is a new spring from Crosman (stated as fits Swiss Arms).
Bottom one - the original, notice that at the end kind of inserted another spring, both ends are not broken! Is it just a design? With holow point pellet 8... grain is about 850 f/s. The top end of the "inserted spring on the bottom of the main spring had about 5mm of the broken spring