GTA
All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Show Off Your Air Guns With Mods (SHOW and TELL) => Topic started by: RATSLAYER on October 25, 2019, 08:44:43 PM
-
Finished product first so you can see the fun i've been having!
(https://i.imgur.com/e7pLIKZ.jpg)
Started out with a Stock 2400KT with a red dot but like most of you guys can probably relate I couldn't just stop there!
(https://i.imgur.com/YGGZDpa.jpg)
Started sourcing various parts to get my dream build together.
A quick mock-up:
(https://i.imgur.com/UUBibWQ.jpg)
1701-P/MARAUDER trigger group vs stock
(https://i.imgur.com/wdTvFVl.jpg)
AA Boss RP Powervalve
(https://i.imgur.com/wCsdH63.jpg)
1701-P hammer vs AA 2.1oz. SS hammer
(https://i.imgur.com/wwfjam6.jpg)
Tippman 98 colapsable buttstock and with MellonAir power adj.adapter
(https://i.imgur.com/4UghepZ.jpg)
(https://i.imgur.com/qTSJlx2.jpg)
Modified (cut and gutted) X-Aegis carbon fiber bi-pod 6-9 inch to decrease weight. Bolts right up to fore grip using the 2 existing rivet holes.
(https://i.imgur.com/1RffWWi.jpg)
Great slip on for 1322 2240 2400 etc.
(https://i.imgur.com/wunmRCL.jpg)
10 shot Mag
(https://i.imgur.com/jsY9GqH.jpg)
It all comes together to become what I lovingly refer to as the RATSLAYER ll 2400KT.
18 inch barrel with a 21 inch shroud BYF 3-9X-32 Bugbuster Scope w/ Burris Fast Fire ll red dot.
(https://i.imgur.com/e7pLIKZ.jpg)
(https://i.imgur.com/HcqkpeU.jpg)
(https://i.imgur.com/hAzVVXk.jpg)
Good pellet BAD RAT
(https://i.imgur.com/Ubgxvio.jpg)
The girl loves to join in on the hunt.
(https://i.imgur.com/2TvpVQz.jpg)
The girl loves to join in on the hunt.
The boy hates 'em too.
(https://i.imgur.com/oIgJso9.jpg)
-
WOW! That's a real beauty Ratslayer. What's the muzzle velocity?
-
Very Very..... Nice Gun ! Good Work ! It Dazzles the Eyes !
I like you dog too !
Best Wishes - Tom
-
I showed this post to my stock 2400KT and she turned green with envy.
-
WOW! That's a real beauty Ratslayer. What's the muzzle velocity?
650fps w/9.6gr. 11.5ftlb. w/21gr.
-
Where did you get the shroud?
Or is it home made?
Stinkin' cool it is! 8)
I may refer to this on my next rendition of my 2060
-
Jay very nice work. This what I did with my Diana Bandit. Craig
Before
(https://i.postimg.cc/9z8k0DNJ/Diana-Bandit-Build-008.jpg) (https://postimg.cc/9z8k0DNJ)
After
(https://i.postimg.cc/G8TQYMJS/Diana-Bandit-new-Stock-010.jpg) (https://postimg.cc/G8TQYMJS)
-
Okay, I will admit that I'm a little envious.
Nice work guys.
Hunter
-
Where did you get the shroud?
Or is it home made?
Stinkin' cool it is! 8)
I may refer to this on my next rendition of my 2060
Very nice setup, again, where did you get the barrel shroud and end cap?
-
Kewl! I likey! :D
First time that I've seen a red dot on top of a scope, how well does that work? I like the idea.... :D :D
Jesse
-
Great style, it looks like it came right out of a James Bond movie ;D
-
Kewl! I likey! :D
First time that I've seen a red dot on top of a scope, how well does that work? I like the idea.... :D :D
Jesse
Loudonville! We used to come down from Massillon to go camping & canoeing in Loudonville.
-
Ya know it wasn't until today that I realized that I commented on a year-old thread? ::) :P
Born and raised here, so you and I have probably been within waving range at some point. A round of "it's a small world after all" would seem appropriate, LOL.
Jesse
-
Ya know it wasn't until today that I realized that I commented on a year-old thread? ::) :P
Born and raised here, so you and I have probably been within waving range at some point. A round of "it's a small world after all" would seem appropriate, LOL.
Jesse
I used to go to Mohican St Park a lot. There was a local who lived inside the park named Paul who had some really good moonshine.
-
I wonder, was the natural beauty of the park the attracting feature, or the local *cough* spirit(s?)..... ;) ;) ;)
Just kidding :D.
Jesse
-
Both. ;)