Donation

All Springer/NP/PCP Air Gun Discussion General > 3D printing and files

Daisy Powerline 426 suppressor silencer .stl file for 3d printing

<< < (29/29)

subscriber:
Thanks, Mel

Mel:

--- Quote from: Mel on February 19, 2025, 03:21:43 PM ---i attach front and rear, in 2 parts

ps: just fyi, process i did with meshmixer:
i took a rear part stl (v2 longer-rail-two-parts-version) and plane-cut top (from 80mm to top), then i plane-cut from snout base to top and after separate shells, i made snout 0.5mm thicker, separated rail 0.5mm from bore center and made it 2mm longer (1st up 1mm then zoom 2mm), then saved it.
i took one-piece v1 stl and plane-cut bottom (from 80mm to bottom), then appended the previous saved stl and combined both parts as one, so now i have a modified one-piece stl without prongs nor dots and with aligned longer rail and thicker snout
last, i plane-cut one-piece into 2 pieces (bottom to 38mm and 38mm to top), separated shells and combined parts in 2 final attached rear and front stls.

--- End quote ---

added fixed front part (base was not flat)

Mel:

--- Quote from: Mel on February 19, 2025, 03:20:59 PM ---hi subscriber! it's true i don't know what i want LOL
i would like an stl with the dimensions of the attached ones (but without the "ugly" edges and steps) as they are working as desired with the gun once printed although it is not a clean model as made from chunks and cuts. As i donīt know CAD i made modifications and tests with meshmixer in an unprofessional way. Althouh with some almost-not-visible edges, im satisfied modifing by myself your great stls, so no matter if you won't modify with CAD. Just wanted to have a more pro and beautiful model. I'm right now printing my attached rear part and will let you know if it can be taken as reference for a clean model. Thank you so much! Amazing how you designed this silencer.

--- End quote ---

also added fixed 1-piece as it was this model which base wasn't flat and error was translated to front part

Mel:
Hi subscriber! Hi everybody!
I found out why ALL my silencer's rails where loose, it wasn't PLA misteriously became bigger as time went by but gun's rail became smaller as it is soft plastic and has been "sanded" with regular use. So as you use tigh rail suppressor it makes the gun's smaller. I've been playing cat and mouse LOL
I checked original measures of rail, 21.35mm wide, and compared to current today, less than 21mm
Best regards!

Mel:
This is how i just solved it preventing rail from moving forward after every shot
Pic rail reinforced version is the right one for this solution
BR

Navigation

[0] Message Index

[*] Previous page