Donation

All Springer/NP/PCP Air Gun Discussion General > 3D printing and files

Daisy Powerline 426 suppressor silencer .stl file for 3d printing

(1/29) > >>

Mel:
Hi i found Daisy Powerline 415's .stl file at Thingiverse by great Terry Harman.
But i can't find for 426, anyone has it? I would be so thankful. As it is not available anywhere, i would like to print it myself. Thanks

subscriber:
Mel,

It looks like the pic-rail underneath the 426 muzzle could be used to attach a suppressor.    As on this Buck-Rail product:

https://buck-rail.com/2019/12/14/daisy-powerline-426-silencer/



Below the last image at the above page, is an offer to download the print file.  Now, I get file not found, but perhaps you could contact BR and ask them about it:

https://buck-rail.com/contact-us/

If they don't want to help you, generating a similar design would be easy enough; round or rectangular.

Mel:
Hi i contacted them, suppressor is out of stock for a long time now and they don't share file anymore.
June 2021 it was shared as DAISY-426-SILENCER.zip but no available anymore. Please anyone?

subscriber:
Well, Mel

If you can take measurements off the front of your 426, that define the rail's relationship to the center of the bore axis, designing you a round moderator of any reasonable diameter and length should be a simple matter.

If you want a rectangular shape to match the pistol, more dimensions would need to be known.  The length of the rail from the muzzle face is also pertinent.

I suggest 25 mm OD and 100 mm long, so the mod does not look stupidly large.

I don't know how close the rail under your pistol's muzzle is to the official specs:




If you like, I can use the above specs to design you a "tube"; but I need to know the center of the bore axis to a reference surface on the rail.  To keep it simple, perhaps the flat top of the rail (inverted on your pistol) would suffice.  I will be generous with the bore to BB clearance, both to tolerate misalignment, and to allow for BB dispersion from the smooth bore barrel.

You get the STL and print it yourself, or have it done near to your location.    This is a free service that comes with your GTA membership. :)  Or just because you can't find what you are looking for.

Mel:
Design is not easy, baffles inside, look great work by Terry Harman with Daisy 415:



Would you also design baffles? Thanks

Navigation

[0] Message Index

[#] Next page