looking to see if anyone could make this LDC idea for a drop in baffle replacement on Trail NP2 part #Crosman Np214-001 Trail Bafflethread is 1/2-20 unf i believe.i want to maximize hollow tube use with a conical ldc or the screw in adapter extra long conical drilled to let pressure escape into the barrel shroud while some of the LDC protrudes longer than shroud.also an oring groove at the end of conical adapter to seat/seal shroudsaw some silencers that might fit and i can drill the holes but most are straight not conical.heres a quick diagrami do have access to a wannabe lathe, nothing fancy so maybe some tips how to make cone that tapers off straight outside of barrel
Quote from: LeadPoisoner on June 22, 2017, 01:06:51 AMlooking to see if anyone could make this LDC idea for a drop in baffle replacement on Trail NP2 part #Crosman Np214-001 Trail Bafflethread is 1/2-20 unf i believe.i want to maximize hollow tube use with a conical ldc or the screw in adapter extra long conical drilled to let pressure escape into the barrel shroud while some of the LDC protrudes longer than shroud.also an oring groove at the end of conical adapter to seat/seal shroudsaw some silencers that might fit and i can drill the holes but most are straight not conical.heres a quick diagrami do have access to a wannabe lathe, nothing fancy so maybe some tips how to make cone that tapers off straight outside of barrelSeems it would be easier to just remove the plastic shroud and get an LDC with the correct threads and just screw it to the barrel, which is already threaded at the end.Rocker1 already makes a threaded LDC, I don't think it's the same threads, but doesn't seem like it would be difficult to make one that matches the existing threads on the barrel.
its plastic and can break easy..
You've got me interested as I do not care for the stock baffled setup that much. I have a carbon fiber shroud which seems to change the frequency of the report, so it's real quiet now, but now you have me thinking just how quiet it might become with an added ldc on the end + using shroud... I'll be keeping a watchful eye on your progress for sure.