Hatsan Model 1000 Vortex Striker .25

[Ronno6]

Maybe I should print out the thread as a complete bio to accompany the hardware.......
May be on display in a museum somewhere in the future......

[avator]

Maybe I should print out the thread as a complete bio to accompany the hardware.......
May be on display in a museum somewhere in the future......

LOL... ok.

[Ronno6]

Regarding the RC bearing in the trigger.......
That is a 5mm x 8mm OD bearing.
I an uncomfortable with that setup as it allows the gun to fire even when the safety is on.
I am thinking of making a sparer that is a tad smaller, say 7mm OD.
I believe that will give sufficient trigger creep to engage the safety before firing.
However, as it will NOT be  a ball bearing, I wonder as to if the trigger will become less smooth............
I can pretty well polish the OD of the spacer, and maybe the underside of the sear....
I am hoping that I will not need to re-install the original trigger spring, but I do have if needed.

Gonna give it a go.
Probably use steel for hardness........

I also have a Welsh Willie trigger that I could use.............I guess I'm not gonna find another use for it..

[Back_Roads]

 IIR Kenny My Airgun Reviews, used a 7 or 7.5mm bearing to keep the safety working and no bump firing.